BEZGAR RC Boat Accessories Package for TX2P1 Instruction Manual

1. Киришүү

This instruction manual provides essential information for the proper use, installation, and maintenance of your BEZGAR RC Boat Accessories Package, specifically designed for the TX2P1 RC Boat. Please read this manual thoroughly before using the accessories to ensure optimal performance and longevity.

2. Пакеттин мазмуну

Your BEZGAR RC Boat Accessories Package for TX2P1 includes the following items:

• 7.4V 1200mAH Li-ion Battery x 1
• Заряддоо кабели x 1
• Screw Propeller x 2
• Protective Silicone Gel x 2
• Руль x 1

Image: Contents of the BEZGAR RC Boat Accessories Package for TX2P1, including a 7.4V 600mAh Li-ion battery, two screw propellers, two protective silicone pieces, and a rudder.

3. Орнотуу жана орнотуу

These accessories are designed for the BEZGAR TX2P1 RC Boat. Refer to your TX2P1 boat's main instruction manual for specific boat disassembly/assembly steps if needed.

3.1. Батареяны орнотуу

1. Ensure the TX2P1 RC boat is powered off and dry.
2. Locate and open the battery compartment on the boat.
3. Carefully connect the 7.4V 1200mAH Li-ion Battery to the boat's power connector.
4. Place the battery securely within the compartment and close the cover, ensuring it is properly sealed to prevent water ingress.

3.2. Пропеллерди орнотуу

1. Identify the propeller shaft at the rear of the boat.
2. Align a new Screw Propeller with the shaft and push it firmly into place.
3. Secure the propeller with any provided retaining hardware (e.g., nut, washer) as per your boat's design.

3.3. Rudder Installation

1. Locate the rudder mounting point at the stern of the boat.
2. Attach the Rudder to the designated slot or mechanism.
3. Ensure the rudder is securely fastened and moves freely without obstruction.

3.4. Protective Silicone Gel Installation

1. These silicone pieces are designed to protect vulnerable areas of the boat.
2. Identify the areas on your TX2P1 boat where protective silicone can be applied (e.g., bow, sides).
3. Adhere or attach the Protective Silicone Gel pieces firmly to these areas for added impact protection.

4. Иштөө нускамалары

Once accessories are installed, refer to your BEZGAR TX2P1 RC Boat's main manual for detailed operating procedures. The following videos demonstrate general RC boat operation and features that your TX2P1 boat may share.

5. Техникалык тейлөө

5.1. Батареяга кам көрүү

• Always use the provided Charging Cable to charge the Li-ion Battery.
• Батареяны ашыкча заряддабаңыз же ашыкча зарядсыздандырбаңыз.
• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Disconnect the battery from the boat when not in use.

5.2. Жалпы тазалоо

• After each use, especially in saltwater, rinse the boat and accessories with fresh water.
• Dry all components thoroughly before storage to prevent corrosion.
• Inspect propellers and rudder for any debris or damage regularly.

6. Кыйынчылыктарды

If you encounter issues, please refer to the TX2P1 RC Boat's main manual for comprehensive troubleshooting. Below are general tips related to the accessories:

• Батарея кубатталбай жатат: Ensure the charging cable is properly connected to both the battery and a power source. Check for any damage to the cable or battery.
• Төмөндөтүлгөн аткаруу: Check the battery charge level. Inspect propellers for damage or entanglement with debris.
• Loose accessories: Periodically check that all installed accessories (propellers, rudder, protective silicone) are securely attached.

7. Техникалык шарттар

8. Кепилдик жана колдоо

BEZGAR stands by the quality of its products. While specific warranty details for this accessories package are not provided in this document, we are committed to customer satisfaction.

If you have any questions, concerns, or require assistance with your BEZGAR RC Boat Accessories Package for TX2P1, please do not hesitate to contact us. Our customer support team is ready to help.