SUNLU FilaDryer S4 3D Printer Filament Dryer Instruction Manual

1. Киришүү

The SUNLU FilaDryer S4 is an advanced 3D printer filament dryer designed to maintain optimal filament quality by removing excess moisture. This device is crucial for enhancing drying efficiency and improving printing quality, especially when working with hygroscopic filaments like PETG, ABS, TPU, and Nylon. It features a large 4-spool capacity, efficient PTC heating, and intelligent humidity monitoring to ensure your filaments are always print-ready.

2. Продукт бүтүп калдыview & Өзгөчөлүктөрү

2.1-сүрөт: The SUNLU FilaDryer S4, showcasing its sleek black design and capacity for multiple filament spools.

2.2-сүрөт: The FilaDryer S4, capable of drying up to four 1kg filament spools simultaneously, enhancing drying efficiency and printing quality.

Негизги өзгөчөлүктөрү:

• 4 Spool Capacity: Dries up to four 1kg 3D printer filaments, allowing for drying while printing and improving overall efficiency.
• Оптималдуу өлчөмдөр: External size: 460(L) x 220(W) x 310(H)mm; Internal size: 450(L) x 175(W) x 207(H)mm. Net weight: 4KG.
• 8 Filament Exit Holes: Features eight outlets for versatile filament routing, ideal for multiple printers and various loading angles, ensuring smoother printing.
• 350W PTC Heater: Equipped with a powerful 350W PTC heater for safe and highly efficient heating (50% higher efficiency than FilaDryer S2).
• 3 Circulation Fans: Three high-quality fans ensure consistent temperature and 360° surround heating for even drying throughout the entire area.
• Жөнгө салынуучу температура жана таймер: Temperature range: 35-70°C; Timer range: 0-99 hours. Parameters can be adjusted to suit specific filament conditions.
• Жогорку шайкештик: Supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, compatible with 1.75mm, 2.85mm, and 3.00mm filament diameters.
• Intelligent Monitoring: Real-time humidity and temperature monitoring with automatic stop (RH≤25%), power-saving storage mode (25%

2.3-сүрөт: Internal heating and fan system for uniform drying.

2.4-сүрөт: Multiple filament exit points for flexible printer setups.

2.5-сүрөт: Guide for optimal temperature and time settings based on filament type.

2.6-сүрөт: The intelligent monitoring system automatically adjusts drying based on humidity levels.

2.7-сүрөт: Visual comparison demonstrating improved print quality with dry filament.

2.8-сүрөт: Detailed dimensions and contents of the FilaDryer S4 package.

3. Орнотуу колдонмосу

3.1 кутудан чыгаруу

Carefully unbox your SUNLU FilaDryer S4. Ensure all components listed in the packing list (Figure 2.8) are present. The unboxing process is demonstrated in the video below.

3.2 Физикалык орнотуу

1. Install PTFE Tube: Insert the provided PTFE tubes into the designated filament exit holes. Push firmly to secure.
2. Place Filament: Open the top cover by pulling the safety lock latch back. Place up to four 1kg filament spools inside the dryer.
3. Тоют жипчеси: Thread the filament through the installed PTFE tubes. You can use either the top holes or side holes depending on your printer setup.
4. Мукабаны жабуу: Securely close the top cover.

3.3 Кубат күйгүзүлдү

Connect the power cable to the dryer and plug it into a power outlet. Flip the main power switch to the 'ON' position. The display screen will illuminate.

4. Иштөө нускамалары

The FilaDryer S4 features an intuitive touch screen interface for easy operation. Refer to the screen function introduction video for a visual guide.

4.1 Basic Operation (Manual Mode)

1. Температураны коюу: Use the 'SET' button to navigate through settings. When the temperature value flashes, use the up/down arrows to adjust the desired drying temperature (35-70°C).
2. Кургатуу убактысын коюңуз: When the time value flashes, use the up/down arrows to set the drying duration (0-99 hours).
3. Кургатып баштоо: The dryer will automatically begin heating once settings are confirmed.

4.2 Intelligent Drying Modes

The FilaDryer S4 offers intelligent drying modes based on real-time humidity monitoring:

• Automatic Stop (RH ≤ 25%): The dryer will stop heating and drying when the internal relative humidity drops to 25% or below.
• Power Saving Storage Mode (25% < RH < 50%): The dryer maintains thermal insulation to keep filaments dry without continuous heating.
• Automatic Start (RH ≥ 50%): If the humidity rises to 50% or above, the dryer will automatically re-heat and re-dry the filaments.

4.3 Filament Type Presets

The dryer has recommended temperature settings for various filament types. You can select the filament type on the screen, and the dryer will suggest optimal parameters (refer to Figure 2.5).

5. Техникалык тейлөө

To ensure the longevity and optimal performance of your FilaDryer S4, regular maintenance is recommended:

• Таза ички: Periodically wipe the interior of the dryer with a dry, soft cloth to remove any dust or filament debris.
• Check PTFE Tubes: Inspect the PTFE tubes for any wear or blockages. Replace if necessary to ensure smooth filament feeding.
• Desiccants: The S4 has two compartments for storing desiccants. Ensure desiccants are fresh and replace them as needed to maintain low humidity levels for storage.

6. Кыйынчылыктарды

If you encounter issues with your FilaDryer S4, consider the following common problems and solutions:

• Filament Still Moist After Drying:
  • Ensure correct temperature and time settings for your filament type.
  • Verify that the dryer is properly sealed and there are no significant air leaks.
  • Check the condition of desiccants if used for storage.
• Кургаткыч жылытылбайт:
  • Confirm the power cable is securely plugged in and the main switch is on.
  • Check the set temperature; ensure it's above the ambient temperature.
  • If an error code (e.g., ER3) appears, it might indicate a sensor issue. Contact customer support if the problem persists after checking connections.
• Filament Snagging/Breaking:
  • Ensure PTFE tubes are correctly installed and not kinked.
  • Verify filament is properly spooled and not tangled inside the dryer.

7. Техникалык шарттар

8. DIY Possibilities

The SUNLU FilaDryer S4 offers versatility beyond just filament drying. With minor modifications, it can be adapted for other uses:

• 3kg Large Spool Capacity: The dryer can be modified to accommodate larger 3kg filament rolls.
• Бут кийим кургаткыч: The FilaDryer S4 can also function as a shoe dryer.

Watch the official videos below for demonstrations on these DIY modifications: