RUPES HLR15 BigFoot iBrid Random Orbital Cordless Posher Standard Kit User Manual

1. Киришүү

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher Standard Kit. Please read this manual thoroughly before using the product and retain it for future reference.

2. Коопсуздук маалыматы

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This tool is designed for professional use. Improper use can lead to serious injury or damage to the tool and workpiece.

• Көздү, угууну жана кол каптарды камтыган тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
• Жумуш аймагы жакшы жарыктандырылсын жана тоскоолдуктар жок болсун.
• Балдарды жана жанындагы адамдарды операция аймагынан алыс кармаңыз.
• Do not operate the polisher in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же аспапты сактоодон мурда ар дайым батарейканы алып салыңыз.
• Use only RUPES recommended accessories and replacement parts.
• Do not expose the tool or battery pack to rain or wet conditions.
• Charge batteries only with the specified charger.
• Do not incinerate battery packs, even if they are severely damaged. They can explode in a fire.

3. Пакеттин мазмуну

The RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher Standard Kit includes the following items:

• RUPES HLR15 BigFoot iBrid Random Orbital Cordless Polisher
• Dual Battery Charger (Model: 9HC185LT)
• Two (2) 18V 5Ah Li-ion Rechargeable Batteries (Model: 9HB185LT)
• Instruction Manual

Image: RUPES HLR15 BigFoot iBrid Polisher Standard Kit showing the polisher, dual battery charger, and two 18V Li-ion batteries.

4. Продукт бүтүп калдыview

The RUPES HLR15 BigFoot iBrid Polisher is a cordless random orbital tool designed for precision polishing and buffing tasks. It features advanced technology for reduced noise and vibration, an efficient brushless motor, and an anti-spinning ring for consistent performance.

Image: Diagram highlighting key features of the RUPES HLR15 polisher, including new gear technology, in-runner brushless motor, new eccentric set, anti-spinning ring, LED indicator, and 18V Li-ion battery.

Негизги компоненттер:

• In-Runner Brushless Motor: Provides high efficiency and maximum power output (350W) with superior ventilation.
• New Gear Technology: Engineered to reduce noise levels and vibrations for enhanced stability and precision.
• Anti-Spinning Ring: Reduces friction and heat, ensuring smooth operation and consistent rotation.
• 18V Li-ion Battery: 5 Ah capacity for prolonged operation.
• Dual Charger: Designed for fast charging, prioritizing the highest voltage батарея.

Image: The RUPES HLR15 polisher with an 18V 5Ah Li-ion battery inserted, ready for use.

Image: The RUPES dual battery charger with two 18V Li-ion batteries inserted, indicating charging status.

5. Орнотуу

5.1. Батареяны кубаттоо

1. Connect the dual battery charger to a suitable power outlet.
2. Insert the 18V Li-ion batteries into the charging slots. Ensure they are fully seated.
3. The charger's indicator lights will show the charging status. Refer to the charger's specific manual for detailed light indications.
4. Allow batteries to fully charge before first use.
5. Заряддоо аяктагандан кийин, батареяларды заряддагычтан чыгарыңыз.

5.2. Attaching the Backing Plate and Polishing Pad

The HLR15 uses RUPES PrecisionPro backing pads, designed for stability and control.

Сүрөт: асты view of a RUPES backing plate, showing the hook-and-loop surface for attaching polishing pads.

1. Ensure the polisher is turned off and the battery is removed.
2. Арткы пластинканы жылмалоочу шпиндель менен тууралаңыз.
3. Securely fasten the backing plate. Some models may require a wrench (not included) to tighten.
4. Attach the desired RUPES polishing pad to the hook-and-loop surface of the backing plate, ensuring it is centered and firmly pressed.

Image: Diagram illustrating the features of RUPES PrecisionPro backing pads, including lower center of gravity, rubber border protection, and balancing versatility.

6. Иштөө нускамалары

6.1. Күйгүзүү / Өчүрүү

1. Insert a fully charged battery into the polisher until it clicks into place.
2. To turn on the polisher, press the power switch.
3. To turn off the polisher, release the power switch.

6.2. Ылдамдыкты жөндөө

The HLR15 features a speed control dial to adjust the rotations per minute (RPM) for various applications.

Image: Detail of the speed control dial on the RUPES HLR15 polisher, allowing users to select the desired operating speed.

1. Rotate the speed control dial to select the desired speed setting (typically 1-5 or 1-6).
2. Start with a lower speed for initial product spreading or delicate surfaces, and increase as needed for correction.

6.3. Жылмалоо техникасы

For optimal results and to prevent damage, follow these general guidelines:

• Apply a small amount of polishing compound directly to the pad or workpiece.
• Place the pad flat on the surface before turning on the polisher.
• Move the polisher in a controlled, overlapping pattern, maintaining even pressure.
• Avoid excessive pressure, which can generate heat and reduce effectiveness.
• Regularly clean or replace polishing pads to maintain performance.
• Ар дайым жакшы желдетилген жерде иштеңиз.

7. Техникалык тейлөө

7.1. Тазалоо

• After each use, remove the battery and clean the polisher body with a soft, damp кездеме.
• Remove and clean polishing pads thoroughly according to their specific instructions.
• Ашыкча ысып кетүүнүн алдын алуу үчүн бардык желдеткич тешиктердин чаңдан жана таштандылардан тазаланганын текшериңиз.
• Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.

7.2. Батареяга кам көрүү

• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Do not allow batteries to fully discharge for extended periods.
• Charge batteries regularly, even if not in use, to maintain their lifespan.
• If a battery is damaged or not holding a charge, dispose of it properly according to local regulations.

7.3. Сактоо

• Store the polisher, batteries, and charger in a clean, dry, and secure location, out of reach of children.
• Remove the battery from the polisher before storage.
• If storing for an extended period, ensure batteries are partially charged (around 50%) to preserve their health.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RUPES webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Official RUPES Webсайт: www.rupes.com