1. Продукт бүтүп калдыview

The YESWELDER ARC-125D PRO is a compact and portable mini inverter welding machine designed for both MMA (Manual Metal Arc, also known as Stick welding) and Lift TIG (Tungsten Inert Gas) welding processes. It features an intelligent LED display for clear visibility of welding parameters and incorporates advanced technologies such as Hot Start, Arc Force, Anti-Stick, and VRD (Voltage Reduction Device) for enhanced performance and safety.

Image 1.1: The YESWELDER ARC-125D PRO Mini Inverter Welder shown with its included ground clamp and electrode holder.

Негизги өзгөчөлүктөрү:

• 2-in-1 Welding Modes: Supports both MMA (Stick) and Lift TIG welding for versatile applications.
• Чоң LED дисплей: Provides clear and easy-to-read information on current, electrode size, function mode, and welding mode.
• Advanced Welding Functions: Equipped with Hot Start, Arc Force, Anti-Stick, and VRD for improved arc ignition, stability, and safety.
• Портативдик дизайн: Compact dimensions (23.6 x 9.4 x 13 cm) and lightweight (approximately 2 kg) for easy transport and storage.
• Коопсуздукту коргоо: Includes automatic compensation for voltage fluctuations, overcurrent protection, overload protection, and temperature control.

2. Коопсуздук маалыматы

Welding operations involve significant risks. Always prioritize safety to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Жалпы коопсуздук чаралары:

• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
• Вентиляция: Ensure adequate ventilation to remove welding fumes and gases, which can be hazardous to health.
• Өрттүн алдын алуу: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Be aware of sparks and hot slag.
• Электр коопсуздугу: Ensure the welding machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• Көздү жана терини коргоо: Welding arc rays can cause severe burns to eyes and skin. Never look at the welding arc without proper eye protection.
• Иш чөйрөсү: Keep the work area clean, dry, and free of clutter. Ensure stable footing.
• Балдар жана байкоочулар: Балдарды жана уруксаты жок адамдарды ширетүү аймагына жакын алып барбаңыз.

VRD (Тtage Reduction Device) function is designed to reduce the open-circuit voltage to a safe level when the machine is not actively welding, minimizing the risk of electric shock. Always ensure this feature is active unless specific welding conditions require its deactivation (refer to operating instructions).

3. Компоненттер жана башкаруу элементтери

Familiarize yourself with the components and control panel of your YESWELDER ARC-125D PRO welding machine.

Камтылган компоненттер:

• YESWELDER ARC-125D PRO Mini Inverter Welder
• Ground Clamp Кабель менен
• Electrode Holder with Cable
• User Manual

Башкаруу панелине киришүү:

Сүрөт 3.1: Алдыңкы жана арткы view of the ARC-125D PRO, highlighting control panel elements and connections.

1. Parameter Button (PARAM): Used to cycle through adjustable parameters such as Hot Start and Arc Force.
2. Welding Mode Button (MODE): Toggles between MMA (Stick) and Lift TIG welding modes.
3. VRD Button (VRD ON/OFF): Activates or deactivates the Voltage Reduction Device.
4. Санариптик дисплей: Shows current settings, selected mode, and other operational information.
5. Value Knob: Adjusts the welding current or other selected parameters.
6. Оң чыгаруу терминалы (+): Connects to the electrode holder for MMA or TIG torch for Lift TIG.
7. Терс чыгаруу терминалы (-): Connects to the ground clamp.
8. Киргизүү кубат кабели: Connects the machine to the 230V AC power supply.
9. Кубат которгучу: Turns the welding machine ON or OFF.
10. Күйөрман: Provides cooling for the internal components during operation.

4. Орнотуу

Proper setup is crucial for safe and effective welding. Follow these steps before beginning any welding task.

4.1 Кубат туташуу:

• Ensure the welding machine's power switch is in the OFF position.
• Connect the input power cable to a grounded 230V AC power outlet. Verify that the power supply meets the machine's requirements.

4.2 Connecting Welding Cables:

1. Ground Clamp: Жерди туташтырыңыз clamp cable to the Negative Output Terminal (-) on the front panel. Securely attach the ground clamp жакшы электрдик байланышты камсыз кылуу үчүн, ширетүүчү столдун даярдалган бөлүгүнө же таза, жылаңач металл бөлүгүнө тийгизиңиз.
2. Electrode Holder (for MMA): Connect the electrode holder cable to the Positive Output Terminal (+) on the front panel.
3. TIG Torch (for Lift TIG): For Lift TIG welding, connect your TIG torch (not included) to the Positive Output Terminal (+). Ensure the TIG torch has a gas valve for manual gas control.

Always ensure all connections are tight and secure before powering on the machine.

5. Иштөө нускамалары

This section details the operation of the YESWELDER ARC-125D PRO for both MMA and Lift TIG welding modes.

5.1 MMA (Stick) Welding:

1. Күйгүзүү: Turn on the welding machine using the Power Switch. The LED display will illuminate.
2. MMA режимин тандаңыз: Press the MODE button until "Stick" or "MMA" is indicated on the digital display.
3. Электродду киргизүү: Securely insert the appropriate electrode (e.g., E6011, E6013, E6010, E7018 up to 3.18mm) into the electrode holder.
4. Токту тууралоо: Use the Value Knob to set the desired welding current (Amperage) based on the electrode type and material thickness.
5. Adjust Parameters (Optional): Press the PARAM button to cycle through Hot Start and Arc Force settings. Use the Value Knob to adjust these values as needed for optimal arc ignition and stability.
6. VRD Function: Ensure the VRD is ON for maximum safety, especially in damp environments or when working at height.
7. Ширетүүнү баштоо: Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc. Maintain a consistent arc length and travel speed.

Сүрөт 5.1: Мисample of Stick welding in progress.

5.2 Lift TIG Welding:

For Lift TIG welding, a TIG torch with a gas valve and a separate gas cylinder (Argon) are required (not included).

1. Күйгүзүү: Ширетүүчү машинаны иштетиңиз.
2. Select Lift TIG Mode: Press the MODE button until "Lift TIG" is indicated on the digital display.
3. Connect TIG Torch: Ensure your TIG torch is connected to the Positive Output Terminal (+) and the gas hose is connected to your Argon gas cylinder.
4. Prepare Tungsten Electrode: Install a sharpened tungsten electrode into the TIG torch.
5. Токту тууралоо: Use the Value Knob to set the desired welding current.
6. Ачык газ клапаны: Open the gas valve on the TIG torch to establish gas flow.
7. Initiate Arc (Lift Arc): Gently touch the tungsten electrode to the workpiece. A small current will flow. Slowly lift the torch to establish the arc. The machine will automatically increase the current to the set value.
8. Perform Welding: Maintain a consistent arc length and feed filler rod manually if required.
9. Арканы токтотуу: To stop welding, simply lift the torch away from the workpiece. Close the gas valve on the TIG torch after welding.

Сүрөт 5.2: Мисample of Lift TIG welding in progress.

6. Техникалык тейлөө

Үзгүлтүксүз тейлөө ширетүүчү машинаңыздын узак мөөнөттүү жана коопсуз иштешин камсыздайт.

Жалпы тейлөө кеңештери:

• Тазалоо: Periodically clean the machine's exterior with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Кабелдик текшерүү: Regularly inspect all welding cables, connections, and the power cord for cuts, fraying, or damage. Replace damaged components immediately.
• Терминал байланыштары: Ensure all output terminals are clean and connections are tight. Loose connections can cause overheating and poor performance.
• Сактагыч: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.
• Күйөрман операциясы: Ensure the cooling fan is not obstructed and operates freely during use.

7. Кыйынчылыктарды

This section provides solutions to common issues you might encounter during operation.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact YESWELDER customer service.

8. Техникалык шарттар

Detailed technical specifications for the YESWELDER ARC-125D PRO Mini Inverter Welder.

Image 8.1: Technical specifications for the ARC-125D PRO.

Image 8.2: The ARC-125D PRO's compact size and light weight (2kg).

9. Кепилдик жана Кардарларды колдоо

YESWELDER is committed to providing quality products and customer satisfaction.

For any issues, questions, or concerns regarding your YESWELDER ARC-125D PRO welding machine, please refer to the contact information provided with your product packaging or visit the official YESWELDER website for support. When contacting support, please have your model number (ARC-125D PRO) and purchase details readily available.