1. Киришүү
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your IRONZON Smart Fingerprint Door Lock. This advanced door lock offers multiple unlocking methods, including fingerprint, passcode, physical key, and smart app control, enhancing security and convenience for your home, hotel, office, apartment, or bedroom.
Сураныч, туура иштешин жана коопсуздугун камсыз кылуу үчүн орнотуу жана колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз.
2. Коопсуздук маалыматы
- Use only new 4 AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
- Ensure the correct polarity when inserting batteries.
- Keep physical keys in a safe, accessible location outside the locked area for emergency access.
- Regularly clean the fingerprint sensor and keypad to ensure optimal performance.
- The USB-C port is for emergency power supply only, not for charging batteries.
3. Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- Front Handle Assembly (with fingerprint sensor and keypad)
- Арткы тутка монтажы
- Spring Bolt (Latch)
- Strike Plate жана Strike Box
- Монтаждоо бурамалар жана аксессуарлар
- Кичинекей бурагыч
- Физикалык ачкычтар (x2)
- Орнотуу боюнча колдонмо / шаблон
4. Продукттун спецификациялары
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | IRONZON |
| Модель аты | LOC191YBUSIR |
| Кулпу түрү | Биометрикалык |
| Өзгөчө өзгөчөлүк | Auto-Lock |
| Кулпуну ачуу ыкмалары | Fingerprint, Passcode, Key, App |
| Материал | Металл |
| Түс | Кара |
| Элементтин өлчөмдөрү (L x W x Y) | 6.3 x 2.3 x 2.3 дюйм |
| Элемент Салмагы | 1.87 фунт (0.85 килограмм) |
| Батареялар талап кылынат | 4 x AAA щелочтуу батарейкалар (киргизилген эмес) |
| Сунушталган колдонуу | Ички эшик |
5. Орнотуу боюнча колдонмо
Follow these steps carefully to install your smart door lock. For visual guidance, refer to the provided images and videos.
5.1 Pre-Installation Checks (Door Compatibility)
Ensure your door meets the following requirements:
- Эшик калыңдыгы: 1⅜" - 1¾" (35mm - 45mm)
- Арткы аралык: Adjustable between 2⅜" - 2¾" (60mm - 70mm)

5.2 Кулпуну орнотуу
- Эшиктин тешигинин алдындагы бекиткичти бекиткичтин бети эшиктин четине тегиз кылып кармаңыз.
- Adjust the backset of the latch if needed (60mm or 70mm). Ensure the square hole of the latch remains vertical.
- Secure the latch with screws.
5.3 Handle Assembly and Installation
- Open the battery cover on the rear handle assembly.
- Insert 4 new AAA alkaline batteries, ensuring correct polarity.
- Connect the door lock circuit board port (wire from front handle) to the battery compartment.
- Align the square tube of the front handle with the latch holes and insert it through the door.
- Attach the rear handle assembly, ensuring the wires are not pinched.
- Tighten the screws to secure both handle assemblies to the door.

6. Орнотуу нускамалары
6.1 Колдонмону жүктөп алуу жана жупташтыруу
- Scan the QR code in the manual or search for "Tuya Smart" in your smartphone's app store to download the application.
- Катталыңыз же Tuya Smart аккаунтуңузга кириңиз.
- Смартфонуңузда Bluetooth'ду иштетиңиз.
- On the lock, long press the small hole on the rear handle with a screwdriver for 9 seconds to enter pairing mode.
- In the Tuya Smart app, tap "Add Device" and select the door lock. Follow the on-screen prompts to complete the pairing process.

6.2 Манжа издерин кошуу
- In the Tuya Smart app, navigate to "Member Management" and select the user for whom you want to add a fingerprint.
- Tap "Add Fingerprint" and follow the voice prompts from the lock.
- Place your finger on the fingerprint sensor, rotating it to capture different angles (at least 5 times) for improved recognition.
- Once successfully added, name the fingerprint in the app.
6.3 Setting Passcodes
- In the Tuya Smart app, navigate to "Temporary Code" or "Member Management" to set up passcodes.
- Төмөнкүдөн тандаңыз:
- Custom Codes: 6-9 digit permanent codes.
- Timed Codes: Valid only during specified dates and times.
- One-time Codes: Work only once.
- Dynamic Code: Multiple uses within a 5-minute window.
- Enter the desired passcode on the lock's keypad when prompted by the app.

7. Кулпуну иштетүү
Your IRONZON Smart Fingerprint Door Lock offers several convenient ways to unlock.
7.1 Кулпуну ачуу ыкмалары
- Манжа ачуу: Place your registered finger on the sensor. The lock will unlock within 1 second if recognized.
- Кулпуну ачуу коду: Touch the keypad to activate it, then enter your registered passcode followed by '#'.
- Колдонмонун кулпусун ачуу: Open the Tuya Smart app, select your lock, and tap the unlock icon. (Requires gateway for remote unlock, sold separately).
- Физикалык ачкыч кулпусун ачуу: Insert the physical key into the keyhole located on the handle and turn to unlock.

7.2 Авто кулпу өзгөчөлүгү
The lock is equipped with an auto-lock feature that automatically secures the door after a set period. This feature can be configured via the Tuya Smart app.
7.3 авариялык электр менен жабдуу
In case of battery depletion, you can temporarily power the lock using a USB-C cable connected to an external power bank. The USB-C port is located at the bottom of the front handle.

8. Техникалык тейлөө
8.1 Батареяны алмаштыруу
When the battery level is low, the lock will provide an audible warning. Replace all 4 AAA alkaline batteries promptly to avoid being locked out. Ensure correct polarity.
8.2 Тазалоо
Regularly wipe the fingerprint sensor and keypad with a soft, dry cloth to remove dust and smudges. Avoid using abrasive cleaners or solvents that could damage the surface or electronic components.
9. Кыйынчылыктарды
- Кулпу жооп бербей жатат: Check battery level and replace if necessary. Use the emergency USB-C power supply.
- Манжа изи таанылган жок: Ensure your finger is clean and dry. Try re-registering your fingerprint, rotating it to capture different angles. Clean the sensor surface.
- Өткөрүүчү код иштебей жатат: Verify the correct passcode is being entered. Check if the passcode is temporary or expired via the app.
- Колдонмого туташуу маселелери: Ensure Bluetooth is enabled on your phone and the lock is in range. Restart the app and try pairing again.
- Auto-lock malfunction: Check the auto-lock settings in the Tuya Smart app.
10. Кепилдик жана колдоо
For product support, technical assistance, or warranty inquiries, please contact IRONZON customer service through the retailer where the product was purchased or visit the official IRONZON webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.


