1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of the Quick Sense QS-M9 Microwave Motion Sensor. This device is designed to detect motion and automatically control connected lighting or other electrical devices, enhancing energy efficiency and security in various indoor and outdoor environments. Please read this manual thoroughly before installation and use.
The QS-M9 sensor offers 360° detection, adjustable time delay, and ambient light sensitivity, making it a versatile solution for automated lighting control.
2. Пакеттин мазмуну
Таңгактан чыгаргандан кийин, төмөнкү компоненттердин бардыгын текшериңиз:
- Quick Sense QS-M9 Microwave Motion Sensor (Full Body)
- Монтаждоо бурамалар
- Колдонуучунун Колдонмосу (бул документ)
3. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Installation should only be performed by a qualified electrician in accordance with all local electrical codes and regulations. Disconnect power at the circuit breaker before installing or servicing the sensor.
- Do not exceed the specified load capacity of the sensor.
- Электр шоктун алдын алуу үчүн туура жерге туташтырууну камсыз кылыңыз.
- Аппаратты суудан жана экстремалдык температурадан алыс кармаңыз.
4. Орнотуу
4.1 Монтаждалуучу жер
The QS-M9 is a surface-mounted sensor. For optimal performance, consider the following:
- Сунушталган орнотуу бийиктиги: 2.2 to 6 meters.
- аныктоо диапазону: Up to 10 meters (360° coverage). Avoid placing the sensor near large metal objects or moving machinery that could interfere with microwave signals.
- Ensure a clear line of sight for the desired detection area, although microwave sensors can detect through thin non-metallic materials like drywall or glass.
4.2 Электр өткөргүч схемасы
Refer to the diagram below for correct wiring connections. Ensure power is disconnected before proceeding.
Сүрөт: Detailed wiring diagram for the Quick Sense QS-M9 sensor, showing connections for L (Live), N (Neutral), L' (Switched Live Output), and 1-10V dimming output terminals. It also labels the Antenna Module, Day/Light Sensor, LED Indication, and DIP switch settings for Stand by dimming level, Stand by period, Day/Light Sensor, Hold Time, and Detection Range.
- Connect the Live (L) wire from the power supply to the 'L' terminal on the sensor.
- Connect the Neutral (N) wire from the power supply to the 'N' terminal on the sensor.
- Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture or controlled device.
- Connect the Neutral (N) wire from your lighting fixture or controlled device to the 'N' terminal on the sensor (or directly to the main neutral line).
- If using 1-10V dimming, connect the '+' and '-' terminals of the sensor's 1-10V output to the corresponding input on your dimmable LED driver.
5. Иштөө жана Орнотуулар
The Quick Sense QS-M9 sensor features adjustable settings via DIP switches to customize its behavior. The DIP switches are located on the side of the unit.
Сүрөт: An illustration detailing the DIP switch panel on the Quick Sense QS-M9 sensor, explaining the functions of each set of switches: Detection Range, Hold Time, Daylight Sensor, Stand-by Period, and Stand-by Mode & Dimming Level.
5.1 DIP которуу функциялары
Adjust the red switches to the desired positions according to the labels for each function:
- Detection Range (Sensitivity): Adjusts the area within which motion is detected. This can be set with different combinations of DIP switches to precisely fit specific application requirements.
- Hold Time (Time Delay): This is the duration the connected lamp remains at 100% brightness after motion is detected and then ceases. Settings typically range from 10 seconds to 30 minutes.
- Daylight Sensor (LUX Setting): Determines the ambient light level at which the sensor will activate. For example, if set to 3 LUX, the sensor will only activate the light when the ambient light is below 3 LUX (i.e., dark conditions). Settings range from <3 LUX to 2000 LUX.
- Күтүү мезгили: This defines the duration the light remains at a low output (dimmed level) after the Hold Time has expired, but before switching off completely in the prolonged absence of a person.
- Stand-by Mode & Dimming Level: This setting defines the dimming percentage (e.g., 10%, 20%, 30%) for the Stand-by Period.
Refer to the specific markings on your device's DIP switch panel for exact switch combinations and their corresponding values.
Сүрөт: A visual representation of the four-stage dimming process controlled by the Quick Sense QS-M9 sensor: Stage 1 (No presence, light off), Stage 2 (Person enters, light at 100% brightness), Stage 3 (After short time, person leaves, light dims to 50%), and Stage 4 (Light dims further to 30%/20%/10% before turning off completely).
6. Техникалык тейлөө
The Quick Sense QS-M9 Microwave Motion Sensor is designed for minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Тазалоо: Gently wipe the sensor's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the unit.
- Текшерүү: Periodically check the sensor for any visible damage or loose connections. If any issues are found, consult a qualified electrician.
- Колдонуучу тейлей турган бөлүктөр жок: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit yourself, as this will void the warranty and may pose a safety risk.
7. Кыйынчылыктарды
If you encounter issues with your Quick Sense QS-M9 sensor, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кыймыл аныкталганда жарык күйбөйт. |
|
|
| Жарык тынымсыз күйүп турат. |
|
|
| Light turns on/off too frequently. |
|
|
| Караңгылоо функциясы иштебейт. |
|
|
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Quick Sense |
| Модель номери | QS-M9 |
| Түс | АК |
| Монтаж түрү | Surface Mount |
| Detection Angle | 360° |
| Тактоо диапазону | Up to 10 meters (under optimal conditions <24°C) |
| Power Source | 220-240V/AC, 50Hz |
| Жүктөө жөндөмдүүлүгү | Max 2000W (220-240V/AC) |
| Time Delay (Hold Time) | Adjustable from 10 seconds (±3s) to 30 minutes (±2min) |
| Ambient Light Sensitivity | Adjustable from <3 LUX to 2000 LUX |
| Сунушталган орнотуу бийиктиги | 2.2дөн 6 метрге чейин |
| Материал | UV-proof Polycarbonate (PC) |
| Продукциянын өлчөмдөрү | 5D x 5W x 5H Сантиметр |
| Элемент Салмагы | 0.2 килограмм (200 г) |
| Келип чыккан өлкө | Индия |
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы
This product may be eligible for an extended warranty plan, such as the '1 Year Extended Warranty by Onsitego', which can be purchased separately. Please refer to the terms and conditions of any purchased warranty plan for details on coverage and claims.
9.2 Кардарларды колдоо
For technical assistance, troubleshooting, or any product-related inquiries, please contact Quick Sense Innovations:
- Өндүрүүчү: Quick Sense Innovations
- Дарек: FARIDABAD, HARYANA - 121002, India
- Байланыш номери: 9560248290
