VIVIJASON 35.4" Square Patio Height Bar Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and care of your VIVIJASON 35.4" Square Patio Height Bar Table. Please read all instructions carefully before assembly and use to ensure safe and proper functionality of the product. Retain this manual for future reference.

Image: The VIVIJASON 35.4-inch Square Patio Height Bar Table in Antique Bronze finish.

Коопсуздук маалыматы

• Монтаждоо алдында бардык бөлүктөрдүн бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же сынган болсо, колдонбоңуз.
• Үстөлдү чийип кетпеш үчүн жумшак, таза бетке чогултуңуз.
• Do not overtighten screws during initial assembly. Tighten all fasteners securely only after all components are aligned.
• 165 LBS максималдуу салмагы кубаттуулугу ашпагыла.
• Балдарды жана үй жаныбарларын чогултуу аянтынан алыс кармаңыз.
• Periodically check all bolts and nuts to ensure they remain tight.
• Use caution when moving the table to prevent injury or damage.

Пакеттин мазмуну

Төмөндө саналып өткөн бардык компоненттер пакетиңизге камтылганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, кардарларды колдоо менен байланышыңыз.

• Стол үстү (1)
• Буттар (4)
• Support Brackets (4)
• Adjustable Footpads (4)
• Жабдуулар топтому (Болттор, шайбалар, Аллен ачкыч)
• Колдонмо (1)

Image: Illustration of the table components and included hardware for assembly.

Монтаждоо көрсөтмөлөрү

Follow these steps to assemble your VIVIJASON Patio Height Bar Table:

1. Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging and lay them out on a soft, flat surface to prevent scratching.
2. Буттарды столго бекитүү: Align each leg with the designated mounting points on the underside of the tabletop. Insert the bolts through the holes, but do not tighten them completely at this stage.
3. Колдоо кашааларын орнотуу: Connect the support brackets between the legs. Ensure proper alignment before inserting bolts. Again, do not fully tighten the bolts yet.
4. Adjust Footpads: Screw the adjustable footpads into the bottom of each leg. These can be adjusted later to level the table on uneven surfaces.
5. Акыркы бекемдөө: Once all components are loosely assembled and aligned, gradually tighten all bolts using the provided Allen wrench. Ensure the table is stable and level before fully tightening.

Image: A visual reminder to loosely assemble all parts before final tightening.

Иштөө нускамалары (колдонуу)

Your VIVIJASON Patio Height Bar Table is designed for outdoor use and offers practical features:

• Жайгашкан жери: Position the table on a stable, level surface in your desired outdoor area such as a patio, balcony, lawn, or garden.
• Кол чатыр тешиги: The table features a 2.2-inch diameter umbrella hole in the center of the tabletop. This allows for the insertion of a standard patio umbrella (not included) to provide shade and comfort during outdoor activities.
• Түздөө: Use the adjustable footpads on each leg to fine-tune the table's stability and ensure it sits level on uneven ground. Rotate the footpads clockwise or counter-clockwise to raise or lower each corner as needed.

Image: The bar table shown with a patio umbrella inserted into the central hole, demonstrating its functionality.

Сүрөт: Жакын план view of an adjustable footpad on a table leg, illustrating how it can be rotated to fit uneven ground.

Техникалык тейлөө жана кам көрүү

To ensure the longevity and appearance of your VIVIJASON Patio Height Bar Table, follow these maintenance guidelines:

• Тазалоо: The cast aluminum construction allows for easy cleaning. Simply hose down the table with water to remove dirt and debris. For stubborn stains, use a mild soap solution and a soft brush, then rinse thoroughly.
• Кургатуу: After cleaning, wipe the table dry with a soft cloth to prevent water spots, especially in areas with hard water.
• Дат каршылык: The table features a powder-coated finish for rust resistance. While designed for all-weather use, storing the table indoors or covering it during harsh weather conditions (e.g., heavy snow, prolonged rain) can further extend its lifespan.
• Текшерүү: Periodically inspect the table for any signs of wear, loose bolts, or damage. Address any issues promptly to maintain structural integrity.

Проблемаларды чечүү

If you encounter any issues with your VIVIJASON Patio Height Bar Table, refer to the following common solutions:

• Стол солкулдатуулары: If the table is unstable or wobbles, check that all bolts are securely tightened. Adjust the individual footpads on each leg to compensate for uneven ground until the table is stable.
• Жыйын учурундагы кыйынчылыктар: If you experience difficulty aligning bolt holes during assembly, ensure that no bolts have been fully tightened prematurely. Loosen all bolts slightly, adjust the components for proper alignment, and then gradually tighten all fasteners.
• Scratches or Finish Damage: Minor scratches can sometimes be touched up with outdoor-grade paint matching the antique bronze finish. For significant damage, contact customer support.

Техникалык шарттар

Image: Detailed diagram showing the dimensions and key features of the bar table.

Кепилдик маалымат

Specific warranty details for the VIVIJASON 35.4" Square Patio Height Bar Table are not provided in the product information. Please refer to the seller's or manufacturer's official website, or contact customer support for current warranty terms and conditions.

Кардарларды колдоо

For any questions, concerns, or assistance with your VIVIJASON product, please contact the seller directly through the platform where the purchase was made. You may also visit the official VIVIJASON brand store for additional information and contact options:

Visit the VIVIJASON Store on Amazon