Denash капотунун кулпусун ачуу үчүн колдонуу боюнча колдонмо

1. Бүттүview

This manual provides essential information for the Denash Hood Latch Release Handle, designed as a direct replacement part for specific vehicle models. It is manufactured with high reliability and stable characteristics to ensure proper function of your vehicle's hood release mechanism.

2. Продукциянын өзгөчөлүктөрү

• Direct aftermarket replacement for the original hood latch release handle.
• Manufactured to professional standards, ensuring stable characteristics and high reliability.
• Designed for easy installation, though professional installation is recommended for optimal results.
• Reference manufacturer part number: 8J1 823 533 C.
• Specifically designed to fit TTRS models from 2007 to 2014 (for Left Hand Driver Side Car).

3. Техникалык шарттар

4. Орнотуу боюнча колдонмо

While this hood latch release handle is designed for easy installation, professional installation is strongly recommended to ensure correct fitment and safe operation. Incorrect installation can lead to malfunction of the hood release mechanism.

Жалпы орнотуу кадамдары (Унаага тиешелүү толук көрсөтмөлөрдү алуу үчүн адиске кайрылыңыз):

1. Даярдоо: Ensure the vehicle is parked on a level surface with the engine off and cool. Disconnect the negative terminal of the battery as a safety precaution.
2. Мүмкүнчүлүк: Locate the existing hood latch release handle assembly, typically found inside the vehicle's cabin near the driver's footwell or dashboard.
3. Removal of Old Handle: Carefully detach the old handle from its mounting point and disconnect the hood release cable. Note the orientation and connection points for reassembly.
4. Жаңы тутканы орнотуу: Connect the hood release cable to the new Denash handle. Ensure the cable is securely seated and properly routed.
5. Монтаждоо: Secure the new handle into its designated mounting position. Verify that it is firmly attached and does not wobble.
6. Сыноо: Before closing the hood, test the new handle's operation several times to ensure it smoothly releases the hood latch. Check for any binding or resistance.
7. Акыркы текшерүү: Reconnect the battery terminal. Close the hood and ensure it latches securely. Then, test the release handle again to confirm proper function.

Сүрөт: Негизги продукт view of the Denash Hood Latch Release Handle, showing its overall shape and design.

Image: Two Denash Hood Latch Release Handles, one upright and one inverted, illustrating various perspectives of the product.

Сүрөт: асты view of the handle, revealing the internal structure and the attachment point for the cable.

Image: A collage displaying four different views of the handle, providing a comprehensive visual overview of its design.

Сүрөт: каптал view of the Denash Hood Latch Release Handle, emphasizing its profile and ergonomic shape.

Сүрөт: жогорудан төмөнгө view of the handle, showing its flat upper surface and overall dimensions from above.

Image: Two separate components of the hood latch release handle, possibly showing the main body and a detached part or different angles of two units.

5. Операция

The Denash Hood Latch Release Handle operates identically to the original equipment. To open the vehicle's hood, locate the handle inside the cabin (typically on the driver's side, near the lower dashboard or footwell). Pull the handle firmly towards you. This action will release the primary hood latch. You may then need to locate a secondary safety latch under the front edge of the hood to fully open it.

6. Техникалык тейлөө

The Denash Hood Latch Release Handle is constructed from durable ABS plastic and requires minimal maintenance. Periodically inspect the handle and its connection to the hood release cable for any signs of wear, damage, or corrosion. Ensure the cable moves freely without obstruction. Clean the handle with a soft, damp cloth if it becomes dirty. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material.

7. Кыйынчылыктарды

Handle Does Not Release Hood:

• Кабель туташуусун текшерүү: Ensure the hood release cable is securely attached to the handle and the latch mechanism under the hood. A loose or disconnected cable will prevent the hood from opening.
• Cable Obstruction/Damage: Inspect the entire length of the hood release cable for kinks, bends, or damage that might prevent it from moving freely. Lubrication of the cable and latch mechanism may also be necessary.
• Latch Mechanism Issue: The problem might be with the hood latch mechanism itself, not the handle. Check if the latch is seized or obstructed.

If issues persist after checking these points, it is recommended to consult a qualified automotive technician for diagnosis and repair.

8. Шайкештик

This Denash Hood Latch Release Handle (Part Number: 8J1 823 533 C) is specifically designed for the following vehicle model:

• TTRS: Модель жылдары 2007-2014

Маанилүү эскертүү: This part is designed for Left Hand Driver Side Cars. Please verify your vehicle's model, year, and existing part number to ensure compatibility before purchase and installation.

9. Кепилдик жана колдоо

For information regarding product warranty, returns, or technical support, please refer to the terms and conditions provided by your original point of purchase or contact the Denash customer service department. Keep your purchase receipt or order details handy for any inquiries.