1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange. Please read these instructions carefully before beginning installation to ensure safe and correct setup. This product is designed to seamlessly integrate with other components of the Brizo Kintsu collection.
2. Продукт бүтүп калдыview
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange is a precision-engineered component designed to extend from your ceiling to connect with a compatible dual waterway raincan shower head. Its robust brass construction ensures durability and reliability in a bathroom environment.
Figure 1: The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange, shown in polished chrome finish. This component connects the shower head to the ceiling water supply.
3. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm
- Тегерек фланец
Note: A dual waterway raincan shower head (e.g., Brizo 81406 or 81406-2.5) and a dual waterway ceiling mount shower arm rough-in (e.g., Brizo R83992) are ЖОК камтылган жана өзүнчө сатып алынышы керек.
4. Техникалык шарттар
| Атрибут | Спецификация |
|---|---|
| Модель номери | 83992-06MF |
| Узундук | 6 inches (measurement of longest side) |
| Фланец диаметри | 3-1/4 дюйм |
| Материал | Жез |
| Бүтүрүү | Chrome (as shown, other finishes may vary) |
| Шайкештик | Requires dual waterway raincan head (81406 or 81406-2.5) and dual waterway ceiling mount shower arm rough-in (R83992) |
5. Орнотуу
Professional installation is highly recommended. Ensure all local plumbing codes are followed.
5.1 Баштоодон мурун
- Turn off the main water supply to the area where the shower arm will be installed.
- Ensure you have the necessary tools (e.g., pipe wrench, thread sealant, measuring tape).
- Confirm that the dual waterway ceiling mount shower arm rough-in (e.g., Brizo R83992) is already properly installed and secured in the ceiling.
5.2 Орнотуу кадамдары
- Жиптерди даярдоо: Apply thread sealant or Teflon tape to the male threads of the shower arm that will connect to the rough-in valve in the ceiling.
- Attach Flange: Slide the round flange onto the shower arm, ensuring the finished side faces towards the ceiling.
- Connect to Rough-in: Carefully thread the shower arm into the ceiling rough-in connection. Hand-tighten first, then use a pipe wrench to tighten securely, ensuring the arm is oriented correctly. Do not overtighten.
- Фланецтин абалы: Slide the flange up against the ceiling, covering the rough-in opening.
- Install Shower Head: Apply thread sealant or Teflon tape to the male threads at the bottom of the shower arm. Thread your compatible dual waterway raincan shower head onto the shower arm. Hand-tighten, then use a wrench if necessary, being careful not to damage the finish.
- Агышуу үчүн сыноо: Slowly turn the main water supply back on and check all connections for leaks. Tighten any leaking connections as needed.
6. Операция
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm functions as a conduit for water flow from your ceiling rough-in to your dual waterway raincan shower head. Once installed, its operation is dependent on the functionality of your shower valve and the connected shower head. Ensure your shower head is properly attached to experience the intended dual waterway functionality.
7. Кароо жана тейлөө
To maintain the finish and performance of your Brizo Kintsu shower arm, follow these guidelines:
- Тазалоо: жумшак менен тазалоо, гamp cloth. For stubborn spots, use a mild soap and water solution. Rinse thoroughly and dry immediately with a soft cloth to prevent water spots.
- Катуу тазалагычтардан качыңыз: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol. These can damage the finish.
- Үзгүлтүксүз текшерүү: Periodically check the connection points for any signs of leaks or corrosion. Address any issues promptly.
8. Кыйынчылыктарды
While the shower arm itself is a passive component, issues can sometimes arise from its connections.
8.1 Leaks at Connections
- Себеби: Insufficient thread sealant, loose connection, or damaged threads.
- Чечим: Turn off water supply. Disconnect the leaking component (either from the ceiling rough-in or the shower head). Clean old thread sealant. Reapply fresh thread sealant or Teflon tape generously. Re-tighten securely, ensuring not to overtighten.
8.2 Суу агымынын азайышы
- Себеби: Blockage in the shower head or rough-in, or issues with the main water supply.
- Чечим: This is unlikely to be caused by the shower arm itself unless it is physically damaged or obstructed. Check the shower head for mineral buildup or debris. Consult the manual for your shower head or rough-in valve for troubleshooting water flow issues.
9. Кепилдик жана колдоо
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange is covered under Brizo's limited lifetime warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Brizo warranty documentation or visit the Brizo webсайт.
For technical assistance, replacement parts, or warranty claims, please contact Brizo Customer Service:
- Webсайт: www.brizo.com
- Телефон: Refer to the Brizo webаймактык байланыш номерлери үчүн сайт.
When contacting support, please have your product model number (83992-06MF) and date of purchase readily available.
