1. Киришүү
The KAIWEETS Brake Fluid Tester Pen (Model KVBF01) is a high-precision instrument designed to quickly and accurately measure the moisture content in various types of brake fluid, including DOT3, DOT4, and DOT5.1. This device helps ensure optimal brake performance and safety by indicating when brake fluid replacement is necessary. Its durable, corrosion-resistant probe and user-friendly features like a data hold function, three-color backlight, and buzzer alarm make it an essential tool for both professional mechanics and DIY enthusiasts.
2. Коопсуздук маалыматы
Please read and understand all safety warnings and operating instructions before using the KAIWEETS Brake Fluid Tester Pen. Failure to do so may result in injury or damage to the device.
- Аппаратты балдардан алыс кармаңыз.
- Аппаратты экстремалдык температурага, түз күндүн нуруна же жогорку нымдуулукка дуушар кылбаңыз.
- Аппаратты түшүрүүдөн же катуу таасирлерден сактаныңыз.
- Аппаратты ажыратууга же өзгөртүүгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Ensure the probe is clean and dry before and after each use to prevent contamination and ensure accurate readings.
- Brake fluid is corrosive. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical attention if irritation persists.
- Dispose of used batteries and brake fluid according to local regulations.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- 1 x KAIWEETS Brake Fluid Tester Pen (KVBF01)
- 2 x AAA батареялары
4. Продукт бүтүп калдыview жана өзгөчөлүктөрү
The KAIWEETS Brake Fluid Tester Pen is designed for ease of use and accurate measurement. Below are its main components and key features.
Figure 4.1: KAIWEETS Brake Fluid Tester Pen and included AAA batteries.
4.1 Негизги компоненттер
- Corrosion-Resistant Probe: Located at the bottom, this durable probe is designed for long-lasting performance and accurate readings even with frequent use.
- LCD дисплей: Shows measurement results, battery status, and fluid type (DOT3, DOT4, DOT5.1).
- Кубат баскычы: Used to turn the device ON/OFF.
- "S" Button (Select/Hold): Used to select fluid type and activate the data hold function.
4.2 Негизги өзгөчөлүктөрү
Figure 4.2: The KAIWEETS tester features a corrosion-resistant probe for enhanced durability and extended use.
Durable and Corrosion-Resistant Probe: The tester is equipped with a robust probe designed to withstand corrosive brake fluid, ensuring long-term reliability and consistent performance.
Figure 4.3: The data hold function allows for easy review of readings.
Маалыматты кармоо функциясы: This feature allows you to freeze the current measurement on the display, making it easier to record or review readings without needing to keep the probe in the fluid.
Figure 4.4: The three-color backlight provides clear visual indications of moisture content.
Three-Color Backlight: The LCD display changes color to provide a quick visual indication of the brake fluid's condition:
- Жашыл: 0% - 2% moisture content. Brake fluid is in good condition.
- Сары: 2% - 3% moisture content. Brake fluid is approaching critical levels; replacement is recommended soon.
- Кызыл: Greater than 3% moisture content. Brake fluid is saturated with moisture and requires immediate replacement.
Figure 4.5: The buzzer alarm provides an audible warning for high moisture levels.
Ойготкуч сигналы: An audible alarm will sound when the moisture level exceeds 3%, providing an immediate warning that the brake fluid needs to be changed.
Figure 4.6: The tester is compatible with DOT3, DOT4, and DOT5.1 brake fluids.
Extensive Testing Coverage: The tester is calibrated to accurately measure moisture content in DOT3, DOT4, and DOT5.1 brake fluids, making it versatile for various vehicle types.
Жогорку тактык: Provides precise readings with an accuracy of ±0.3% within a range of 0% - 4% moisture content.
Автоматтык өчүрүү: The device features an automatic shutdown function to conserve battery life when not in use.
Батареянын төмөн көрсөткүчү: The display will show a low battery icon when the batteries need to be replaced.
5. Орнотуу
5.1 Батареяны орнотуу
The KAIWEETS Brake Fluid Tester Pen requires 2 AAA batteries (included). Follow these steps to install them:
- Locate the battery compartment cover at the top end of the tester.
- Бөлүмдү ачуу үчүн капкакты бурап же жылдырыңыз.
- Бөлүмдүн ичинде көрсөтүлгөндөй, туура полярдуулукту (+/-) камсыз кылып, 2 AAA батарейканы салыңыз.
- Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.
Аппарат азыр колдонууга даяр.
6. Иштөө нускамалары
Follow these steps to accurately test your brake fluid:
- Prepare the Tester: Колдонуудан мурун зонддун таза жана кургак экенин текшериңиз.
- Күйгүзүү: Кубат баскычын басыңыз (⏻) to turn on the tester. The display will light up.
- Select Fluid Type: Press the "S" button to cycle through DOT3, DOT4, and DOT5.1 brake fluid types. Select the type corresponding to your vehicle's brake fluid.
- Зондду иммерске салуу: Carefully immerse the probe into the brake fluid reservoir. Ensure the probe tips are fully submerged in the fluid.
- Өлчөөнү окуу: The tester will automatically display the moisture content percentage. Observe the percentage reading and the backlight color:
- Жашыл жарык: 0% - 2% moisture. Brake fluid is normal.
- Сары жарык: 2% - 3% moisture. Brake fluid needs attention soon.
- Кызыл жарык: Greater than 3% moisture. Brake fluid needs immediate replacement. The buzzer will also sound.
- Use Data Hold (Optional): While the probe is immersed, press and hold the "S" button to activate the data hold function. The reading will be frozen on the display. Press "S" again to release.
- Алып салуу жана тазалоо: Carefully remove the probe from the brake fluid. Wipe the probe clean with a soft, dry cloth immediately after use to prevent corrosion and ensure longevity.
- Өчүрүү: Кубат баскычын басып, кармап туруңуз (⏻) to turn off the tester. The device will also automatically shut down after a period of inactivity.
Figure 6.1: Interpretation of the three-color backlight and buzzer alarm.
7. Техникалык тейлөө
Proper maintenance will extend the life of your KAIWEETS Brake Fluid Tester Pen.
- Тазалоо: Always clean the probe thoroughly with a dry, lint-free cloth immediately after each use. Do not use water or cleaning solvents on the probe or device body.
- Сактагыч: Store the tester in a cool, dry place, away from direct sunlight and corrosive materials.
- Батареяны алмаштыруу: Replace batteries when the low battery indicator appears on the display to ensure accurate readings and proper operation.
8. Кыйынчылыктарды
If you encounter issues with your KAIWEETS Brake Fluid Tester Pen, refer to the following table:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. |
|
|
| Туура эмес окуулар. |
|
|
| Buzzer alarm sounds constantly. |
|
|
9. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модель номери | KVBF01 |
| Продукциянын өлчөмдөрү | 9.92 x 2.56 x 1.57 дюйм |
| Элемент Салмагы | 4.16 унция |
| Power Source | 2 x 1.5V AAA Батареялар (кошулган) |
| Өлчөө тактыгы | ±0.3% |
| Өлчөө диапазону | 0% - 4% moisture content |
| Иштөө температурасы | 0-40°C (32-104°F) |
| Compatible Fluid Types | DOT3, DOT4, DOT5.1 |
| Материал | Полипропилен |
10. Кепилдик жана Кардарларды колдоо
KAIWEETS is committed to providing high-quality products and excellent customer service.
- Кепилдик: Бул продукт сатып алынган күндөн тартып 3 жылдык кепилдик менен келет.
- Кайтаруулар: 30 күндүк акысыз кайтаруу саясатынан пайдаланыңыз.
- Техникалык колдоо: KAIWEETS provides lifetime technical support for this product.
- Биз менен байланышыңыз: If you have any questions, concerns, or require technical assistance, please do not hesitate to contact KAIWEETS customer service. For more information, visit the official KAIWEETS store on Amazon: KAIWEETS Store.
