Introduction
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Орнотуу колдонмосу
1. Пакеттен чыгаруу жана жайгаштыруу
Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Ассамблея
- Place the platter onto the spindle.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Байланыштар
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amplifier's ground terminal to minimize hum.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Figure 4: Power switch location.
2. Жазууну ойнотуу
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Carefully remove the stylus protector from the cartridge.
- Колду көтөрүү рычагын колдонуп, колду көтөрүңүз.
- Тонер рычагын пластинканын каалаган баштапкы оюгунун үстүнө акырын жылдырыңыз.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Bluetooth байланышы
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Техникалык тейлөө
1. Айлануучу табакты тазалоо
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Стилуска кам көрүү
- Regularly inspect the stylus for dust and debris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн жок же өтө төмөн | Туура эмес киргизүү тандоосу күйүк amplifier; loose cables; volume too low. | камсыз кылуу amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Гызылдаган үн | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Үндү өткөрүп жиберүү же бурмалоо | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Тарелка айланбай жатат | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Продукциянын өлчөмдөрү | 13.19 x 16.34 x 3.94 дюйм |
| Элемент Салмагы | 14.92 фунт |
| ASIN | B0DHTXH32G |
| Элемент моделинин номери | T1 Evo with Preamp |
| Өндүрүүчү | Pro-Ject |
| Бренд | Pro-Ject |
| Байланыш технологиясы | Зымдуу |
| Максималдуу айлануу ылдамдыгы | 45 RPM |
| Өзгөчө өзгөчөлүк | Жөнгө салынуучу ылдамдык |
| Стиль | Камтылган Preamp |
| Түс | Сатин Ак |
| Модель аты | T1 Evo with Preamp |
| Ызы-чуунун катышы | 70 дБ |
| Дата биринчи жеткиликтүү | 24-сентябрь, 2024-жыл |
Кепилдик жана колдоо
Кепилдик маалымат
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Кардарларды колдоо
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webбайланыш маалыматы жана кошумча ресурстар үчүн сайт.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
