HANNATEK HO51 көчмө 3-бирде осциллограф, мультиметр жана толкун формасынын генератору колдонуучусунун колдонмосу

1. Киришүү

The HANMATEK HO51 is a versatile, portable 3-in-1 device that integrates the functions of a digital oscilloscope, a multimeter, and a waveform generator. Designed for electronic troubleshooting, testing, and educational purposes, it offers a compact solution for various measurement needs. Its user-friendly interface and robust design make it suitable for both beginners and experienced professionals.

Негизги өзгөчөлүктөрү:

• 3-ин-1 Функциясы: Combines an oscilloscope, multimeter, and waveform generator in a single compact unit.
• Осциллограф: 50 MHz bandwidth and 250 MS/s real-time sampling rate for precise waveform analysis.
• Мультиметр: Accurate measurements of voltage, current, resistance, capacitance, continuity, and diode tests.
• Толкун формасынын генератору: Generates sine, square, triangle, and custom waveforms up to 1 MHz.
• Портативдик дизайн: Lightweight and compact (198mm x 100mm x 39mm, 0.5 kg) for easy transport and field use.
• Дисплей: 3.5-inch color screen with an intuitive interface.
• PC программалык шайкештиги: USB connectivity for data transfer and advanced control.
• Күч: Operates on battery or via USB power.

Image 1.1: The HANMATEK HO51's integrated Oscilloscope, Multimeter, and Waveform Generator functions.

2. Коопсуздук маалыматы

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Аппарат бузулуп калса же туура иштебей жатса, аны колдонбоңуз.
• Ensure proper probe connections and settings before taking measurements.
• Көлөм үчүн максималдуу киргизүү баалоолорунан ашпаңызtage жана ток.
• Use only the accessories provided or approved by HANMATEK.
• Avoid operating the device in wet or damp шарттар.
• Disconnect power from the circuit under test before connecting or disconnecting probes.
• Always observe local and national safety codes.

3. Пакеттин мазмуну

Төмөндө көрсөтүлгөн бардык буюмдар таңгагыңызда бар экенин текшериңиз. Эгерде кандайдыр бир буюмдар жок болсо же бузулуп калса, сатуучуга кайрылыңыз.

• HANMATEK HO51 Device
• USB кабели (Type-C)
• Пассивдүү осциллографтын зонд
• Мультиметрдик тесттер
• Quick Start Guide
• Probe Calibration Tool
• Кубаттуу адаптер
• Жумшак ташуучу куту

Image 3.1: HANMATEK HO51 device and included accessories.

4. Продукт бүтүп калдыview

The HANMATEK HO51 features a clear layout for easy operation. Familiarize yourself with the buttons, connectors, and display area.

4.1 Алдыңкы панелди башкаруу жана дисплей

Image 4.1: Front panel layout and controls of the HANMATEK HO51.

• Дисплей аймагы: 3.5-inch color screen for waveform, measurement data, and menu display.
• F1-F4 баскычтары: Multi-function keys, their purpose changes based on the current menu.
• Режим ачкычы: Осциллограф, мультиметр жана толкун формасынын генератору режимдеринин ортосунда которулат.
• CH Key: Channel selection (if applicable) or related settings.
• HOR Key: Horizontal scale adjustment for oscilloscope.
• Системдик ачкыч: Accesses system settings, including language selection.
• Сактоо ачкычы: Saves current waveform data or measurement results.
• Триг/Δ ачкычы: Trigger menu for oscilloscope or relative value key for multimeter.
• Авто ачкыч: Automatic setting for oscilloscope or automatic range key for multimeter.
• Measure Range Key: Measurement menu for oscilloscope or range key for multimeter.
• Кубат которуштуруу ачкычы: Аппаратты күйгүзөт/өчүрөт.
• Ойнотуу/тындыруу баскычы: Stops/runs oscilloscope acquisition or holds value for multimeter.
• Чабыттоо баскычтары: Up, Down, Left, Right for menu navigation and parameter adjustment.
• Мультиметрдин киргизүү порттору: A, mA, COM, QVC for connecting multimeter test leads.

4.2 Side and Bottom Connectors

Сүрөт 4.2: Каптал view showing Type-C charging port and rear stand.

• Type-C заряддоо порту: Located on the side for charging the internal battery and USB communication with a PC.
• Probe Compensation / Signal Generator Output Connector: Located on the top side, provides a 2.5V/1KHz square wave signal for probe calibration and serves as the waveform generator output.
• Measured Signal Input Connector (BNC): Located on the bottom for connecting the oscilloscope probe.
• кашаа: An expandable stand on the back allows for convenient viewбурчтар.

5. Орнотуу

5.1 Алгачкы заряддоо

Before first use, fully charge the device using the provided USB Type-C cable and power adapter. The charging indicator will show the charging status.

5.2 Күйгүзүү/өчүрүү

басып, кармап туруңуз Power Switch Key (usually marked with a power symbol) to turn the device on or off.

5.3 Тилди тандоо

Upon first startup, the device may be in a default language. To change the language:

1. басыңыз Система ачкыч.
2. Navigate to the language settings (often labeled F2 or similar).
3. Select your desired language (e.g., English) using the navigation keys and confirm.

5.4 Oscilloscope Probe Calibration

For accurate oscilloscope measurements, calibrate the passive probe before use:

1. Connect the oscilloscope probe to the BNC input connector on the bottom of the device.
2. Connect the probe tip to the probe compensation/signal generator output connector (1KHz square wave) on the top side of the device.
3. Enter Oscilloscope mode (if not already there) and adjust the vertical and horizontal scales to view the square wave.
4. Using the small calibration tool, adjust the screw on the probe connector until the square wave displayed on the screen has flat tops and bottoms with sharp corners, indicating proper compensation.

6. Иштөө нускамалары

6.1 Которуу режимдери

басыңыз Mode key to cycle between Oscilloscope, Multimeter, and Waveform Generator functions.

6.2 Осциллографтын иштеши

In Oscilloscope mode, the device displays waveforms over time. Use the following controls:

• Вертикалдык масштаб (Вольт/Бөлүү): Adjust using the navigation keys (Up/Down) when the vertical scale is highlighted.
• Горизонталдык масштаб (Убакыт/Бөлүнүү): Басыңыз HOR and then use navigation keys (Left/Right) to adjust.
• Trigger орнотуулары: Басыңыз Триг/Δ to access trigger menu. Adjust trigger level, mode (Auto, Normal, Single), and type (rising/falling edge).
• Автоматтык орнотуу: Басыңыз Авто for automatic waveform scaling and positioning.
• Run/Stop: басыңыз Ойнотуу/Тыныгуу key to start or stop waveform acquisition.

6.3 Мультиметрдин иштеши

In Multimeter mode, the device performs various electrical measurements. Connect the multimeter test leads to the appropriate input ports (A, mA, COM, QVC).

• Функция тандоо: Use the F1-F4 keys or navigation keys to select measurement functions (Voltage, Current, Resistance, Capacitance, Continuity, Diode).
• Аралыкты тандоо: Басыңыз Өлчөө диапазону to manually select the measurement range, or use Авто for automatic ranging.
• Үзгүлтүксүздүк тести: Connect leads across a circuit. An audible tone indicates continuity. Note that some users have reported a slight delay in response for continuity tests.
• Диод сыноо: Connect leads across a diode to measure its forward voltagд тамчы.

6.4 Waveform Generator Operation

In Waveform Generator mode, the device outputs various signals from the probe compensation/signal generator output connector.

• Толкун формасынын түрү: Use the F1-F4 keys or navigation keys to select the desired waveform (Sine, Square, Triangle, Pulse).
• Frequency Жөнгө салуу: Adjust the output frequency using the navigation keys.
• AmpЛинияны тууралоо: Чыгууну тууралаңыз amplitude (1Vpp or 2.5Vpp) using the navigation keys.

6.5 Компьютердин программалык камсыздоосуна туташуу

Connect the HO51 to a computer via the USB Type-C port. Compatible PC software allows for data transfer, waveform analysis, and remote control of the device. Refer to the software's documentation for detailed instructions.

Image 6.1: HANMATEK HO51 connected to a PC for data export and analysis.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and accuracy of your HANMATEK HO51.

• Тазалоо: жумшак колдонуу, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any power source before cleaning.
• Сактагыч: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection.
• Батареяга кам көрүү: Батареянын иштөө мөөнөтүн оптималдаштыруу үчүн, аны тез-тез толук зарядсыздандырбаңыз. Эгер узак убакытка сактасаңыз, аны бир нече ай сайын болжол менен 50% га чейин кубаттаңыз.
• Программалык камсыздоонун жаңыртуулары: Periodically check the HANMATEK official webоптималдуу иштөөнү жана жаңы функцияларга жетүүнү камсыз кылуу үчүн жеткиликтүү болгон программалык камсыздоо жаңыртуулары үчүн сайт.

8. Кыйынчылыктарды

If you encounter issues with your HANMATEK HO51, refer to the following common problems and solutions.

• Түзмөк күйбөйт:
  • Ensure the battery is charged. Connect the device to a power source using the USB-C cable and adapter.
  • Кубат баскычын бир нече секунд басып туруңуз.
• Осциллограф режиминде толкун формасы көрсөтүлбөйт:
  • Check if the probe is correctly connected to the BNC input.
  • Verify the probe is properly calibrated.
  • Вертикалдык (Вольт/Бөлүү) жана горизонталдык (Убакыт/Бөлүү) шкалаларды тууралаңыз.
  • Check trigger settings; try setting the trigger mode to 'Auto' or adjusting the trigger level.
  • Ensure the 'Run' state is active (not paused).
• Multimeter readings are inaccurate or slow:
  • Ensure test leads are securely connected to the correct input ports.
  • Туура өлчөө функциясы жана диапазон тандалганын текшериңиз.
  • For continuity tests, allow a moment for the device to register the connection, as some users have noted a slight delay.
  • Consider performing a factory reset via the System menu if persistent issues occur.
• Waveform generator output is incorrect:
  • Ensure the output is connected to the correct port.
  • Verify the selected waveform type, frequency, and amplitude орнотуулары.

9. Техникалык шарттар

Detailed technical specifications for the HANMATEK HO51 device.

9.1 Осциллографтын мүнөздөмөлөрү

9.2 Мультиметрдин мүнөздөмөлөрү

9.3 Waveform Generator Specifications

9.4 Жалпы спецификациялар

10. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or contact HANMATEK customer service directly. You may also visit the product page on Amazon for additional support resources or to contact the seller.

Amazon продукт бети: HANMATEK HO51 on Amazon.com.be