Spider Farmer SF-PlantStand60 4-Tier Plant Stand with LED Grow Lights and Tent Cover User Manual

1. Киришүү

Thank you for choosing the Spider Farmer SF-PlantStand60. This 4-tier plant stand is designed to provide an optimal environment for indoor plant growth, seed starting, and cultivating microgreens. It features adjustable shelves, full-spectrum LED grow lights, and an optional tent cover to create a mini-greenhouse effect. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your product.

2. Коопсуздук маалыматы

• Монтаждоо жана иштетүү алдында бардык нускамаларды окуп чыгыңыз.
• Электр компоненттерин суудан алыс кармаңыз.
• Ensure all connections are secure before plugging in the grow lights.
• Ар бир текченин максималдуу салмагы 110 фунттан ашпаңыз.
• Place the stand on a level, stable surface.
• Unplug the grow lights before performing any maintenance or cleaning.

3. Пакеттин мазмуну

Verify that all components are present before beginning assembly. Refer to the image below for a visual guide of the included parts.

3.1-сүрөт: пакетке киргизилген бардык компоненттер.

• Plant Stand Frame (Poles, Wire Mesh Shelves)
• 6 x LED Grow Light Bars
• 3 x Waterproof Mats
• Semi-transparent Grow Tent Cover
• 4 x Casters with Locks
• 4 x Leveling Adjustable Feet (optional use instead of casters)
• Plastic Ties / Metal Clips for light installation
• 150см электр кабели
• 60cm & 35cm Connecting Cables for lights
• Суу өткөрбөйт капкактар

4. Орнотуу жана чогултуу

Assembly of the SF-PlantStand60 is designed to be straightforward and tool-free. Follow these steps for proper setup.

4.1 Assembling the Plant Stand Frame

1. Attach Casters or Leveling Feet: Screw the 4 lockable swivel casters or the adjustable leveling feet into the bottom of the four vertical poles. Ensure they are securely tightened.
2. Assemble Bottom Shelf: Slide the plastic clips onto the vertical poles at the desired height for the bottom shelf. Ensure the clips are at the same height on all four poles. Place a wire mesh shelf on top of these clips, pressing down firmly until it locks into place.
3. Install LED Grow Lights (Optional during frame assembly): Before adding the next shelf, attach the LED grow light bars to the underside of the installed shelf using the provided plastic ties or metal clips. Connect them using the short connecting cables.
4. Калган текчелер үчүн кайталаңыз: Continue adding plastic clips and wire mesh shelves for the remaining tiers, adjusting the height as needed. Install LED grow lights for each tier as you go.
5. Туташуу кубаты: Once all lights are installed, connect the main power cable to the first light bar and plug it into a power outlet.

Figure 4.1: Easy assembly steps for the plant stand and lights.

4.2 Attaching the Tent Cover

The semi-transparent tent cover can be installed to create a mini-greenhouse environment.

1. Драптын капкагы: Carefully drape the tent cover over the assembled plant stand, ensuring the front zipper opening aligns with the front of the stand.
2. Secure with Velcro: Use the integrated Velcro straps to secure the tent cover to the stand's frame, ensuring a snug fit.
3. Өзгөчөлүктөрдү колдонуңуз: The tent includes a multi-zip closure for easy access, air vents for circulation, and wire holes for cable management.

Figure 4.2: Plant stand with tent cover and its features.

5. Иштөө нускамалары

5.1 Using the LED Grow Lights

The SF-PlantStand60 includes 6 full-spectrum 5000K LED grow lights, designed for various stages of plant growth. These lights are energy-efficient and have a lifespan of up to 50,000 hours.

• Күйгүзүү/өчүрүү: Plug the main power cable into a standard electrical outlet to turn on the lights. Unplug to turn off. Consider using an external timer for automated light cycles.
• Жарык спектри: The 5000K full-spectrum light is suitable for seed starting, vegetative growth, and general indoor plant cultivation.
• Light Intensity (PPFD): The light intensity decreases with distance from the light source. Adjust shelf height to achieve desired PPFD levels for your plants. Refer to the PPFD map for guidance.

Figure 5.1: PPFD values at various heights from LED grow lights.

Figure 5.2: SF-PlantStand60 PPFD Map.

5.2 Текченин бийиктигин тууралоо

The shelves are height-adjustable in 1-inch increments to accommodate plants of different sizes and optimize light exposure.

1. Empty Shelf: For safety, remove plants and any heavy items from the shelf you wish to adjust.
2. Release Clips: Lift the shelf slightly and remove the plastic clips from the vertical poles.
3. Клиптердин ордун өзгөртүү: Place the plastic clips at the desired new height on all four poles, ensuring they are level.
4. Re-seat Shelf: Carefully lower the shelf onto the clips until it locks into place.

5.3 Using the Tent Cover

The tent cover provides a controlled environment for your plants.

• Байкоо терезеси: Use the transparent PVC window to monitor your plants without opening the tent, maintaining internal humidity and temperature.
• Аба желдеткичтери: Open the air vents as needed to provide ventilation and prevent excessive heat buildup, especially when lights are on.
• Мобилдүүлүк: The lockable casters allow you to easily move the entire unit, even with the tent cover installed. Lock the casters to keep the stand stationary.

5.4 Дренаж системасы

Each tier includes a waterproof drainage mat with openable drainage holes to manage excess water and keep your growing area clean.

• Жайгашкан жери: Place the waterproof mats on each shelf before placing plants.
• Дренаж: If drainage is desired, ensure the drainage holes are open. For water retention, keep them closed.
• Тазалоо: The PVC material of the mats is easy to clean and reusable.

Figure 5.3: Waterproof pad with drainage features.

6. Техникалык тейлөө

• Cleaning the Mats: Regularly remove and clean the waterproof mats with mild soap and water to prevent mold and bacterial growth. Ensure they are dry before placing them back.
• Cleaning the Tent Cover: Wipe down the interior and exterior of the tent cover with a damp cloth. Avoid harsh chemicals that could damage the reflective lining or fabric.
• Стендди тазалоо: Жарнама менен металл беттерин сүртүңүзamp cloth to remove dust and debris. Ensure the stand remains dry to prevent rust.
• Light Bar Maintenance: Gently wipe the LED light bars with a dry or slightly damp cloth to remove dust. Do not immerse in water.
• Кастерге тейлөө: Дөңгөлөктөрдүн калдыктары бар-жогун мезгил-мезгили менен текшерип, алардын жылмакай тоголонушун камсыз кылыңыз. Зарыл болсо, майлаңыз.

7. Кыйынчылыктарды

• Жарыктар күйбөйт:
  • Check if the power cable is securely plugged into both the light bar and the wall outlet.
  • Ensure all connecting cables between light bars are properly seated.
  • Розетканын кубат бар экенин текшерүү үчүн башка түзмөк менен текшериңиз.
• Стенддин туруксуздугу:
  • Verify that all plastic clips are correctly installed and supporting the shelves evenly.
  • Ensure casters or leveling feet are securely tightened.
  • Distribute plant weight evenly across the shelves.
• Excessive Heat Inside Tent:
  • Open the tent's air vents to improve ventilation.
  • Consider using a small fan inside the tent to circulate air.
  • Ensure the ambient room temperature is not excessively high.
• Water Leakage from Mats:
  • Check if the drainage holes on the mats are properly closed if you intend to retain water.
  • Ensure the mats are correctly seated on the shelves.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Spider Farmer values customer experience and stands behind its products. The SF-PlantStand60 comes with a 1 жылдык кепилдик жана а 30-day replacement policy.

If your product is damaged or experiences any issues, please contact our support team. We are committed to responding within 24 hours to assist you.

For support, please visit the official Spider Farmer webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.