UTV Stereo Polaris Ranger 1500 & Xpedition Ride Command RCA Output Harness for JBL

1. Продукт бүтүп калдыview

The UTV Stereo Polaris Ranger 1500 & Xpedition Ride Command RCA Output Harness is designed to seamlessly integrate an aftermarket amplifier with your vehicle's existing Ride Command audio system. This harness provides RCA outputs, enabling high-quality audio signal transfer to an external amplifier for enhanced sound performance.

• 23 Pin туташтыргыч: Ensures a watertight and secure connection to the Ride Command system.
• RCA чыгаруулары: Provides dedicated Front Left (FL) and Rear Left (RL) RCA connections for ampөмүр бою киргизүү.
• Braided Loom: Offers increased durability and protection for the wiring.
• Plug and Play Design: Facilitates easy and straightforward installation.

2. Пакеттин мазмуну

Пакетти ачканда, бардык компоненттер бар экенин жана бузулбаганын текшериңиз:

• UTV Stereo Polaris Ranger 1500 & Xpedition Ride Command RCA Output Harness (1)

3. Орнотуу жана орнотуу

This harness features a plug-and-play design for simplified installation. Professional installation is recommended if you are unfamiliar with vehicle electrical systems.

This image displays the complete UTV Stereo RCA Output Harness. It features a robust 23-pin connector on one end, designed for a watertight connection to the Polaris Ride Command system. The main cable is protected by a durable braided loom. Towards the other end, the harness branches into RCA output connectors labeled 'FL' (Front Left) and 'RL' (Rear Left), intended for connecting to an external amplifier. Additionally, there are individual wire leads for various audio signals and power connections, including 'FL+', 'FL-', 'RL+', 'RL-', 'RR+', 'RR-', and a blue wire labeled 'REM' for remote turn-on.

1. Унаа даярдоо: Орнотууну баштоодон мурун, электр зымдарынын кыска туташуусун же бузулушун болтурбоо үчүн унаанын от алдыруу системасы өчүрүлгөндүгүн жана аккумулятордун ажыратылгандыгын текшериңиз.
2. Locate Ride Command Unit: Identify the Ride Command audio unit in your Polaris Ranger 1500 or Xpedition. Refer to your vehicle's service manual for exact location if needed.
3. Connect 23-Pin Connector: Carefully connect the 23-pin connector of the UTV Stereo harness to the corresponding port on the Ride Command unit. Ensure it clicks securely into place for a watertight seal.
4. Маршрут зымдары: Route the harness wiring safely away from moving parts, heat sources, and sharp edges. Use zip ties or cable clamps to secure the harness.
5. RCA чыгыштарын туташтырыңыз: Connect the 'FL' (Front Left) and 'RL' (Rear Left) RCA outputs from the harness to the corresponding input jacks on your aftermarket ampөмүрлүү.
6. Пультту күйгүзүүнү туташтыруу: Connect the blue wire labeled 'REM' from the harness to the remote turn-on input of your amplifier. This wire provides a signal to turn the amplifier on and off with the vehicle's ignition.
7. Connect Speaker Wires (if applicable): Эгерде сиздин amplifier requires direct speaker wire inputs from the Ride Command, connect the labeled individual wires (e.g., FL+, FL-, RL+, RL-, RR+, RR-) to the appropriate amplifier inputs or speaker outputs as per your ampкөтөрүүчүнүн көрсөтмөлөрү.
8. Батареяны кайра туташтыруу: Бардык туташуулар коопсуз жана текшерилгенден кийин, унаанын батареясын кайра туташтырыңыз.
9. Сыноо системасы: Turn on the vehicle's ignition and test the audio system to ensure proper functionality and sound output through the ampөмүрлүү.

4. Иштөө нускамалары

Once installed, the UTV Stereo RCA Output Harness operates passively as an integral part of your vehicle's audio system. It facilitates the transfer of audio signals from the Polaris Ride Command unit to your connected ampөмүрлүү.

• The harness enables the Ride Command system to send pre-amplified audio signals to your external amplifier via the RCA connections.
• The amplifier will power on and off in conjunction with the Ride Command unit, controlled by the remote turn-on wire.
• Audio volume and source selection will continue to be controlled through the Ride Command interface.

5. Техникалык тейлөө

The UTV Stereo RCA Output Harness is designed for durability and requires minimal maintenance.

• Мезгилдүү текшерүү: Periodically inspect the harness for any signs of wear, fraying, or damage to the braided loom or connectors.
• Тазалоо: If necessary, gently wipe the harness with a clean, damp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.
• Туташуу текшерүү: Ensure all connections, especially the 23-pin connector and RCA plugs, remain secure and free of corrosion.

6. Кыйынчылыктарды

If you experience issues after installing the harness, consider the following troubleshooting steps:

• Аудио чыгышы жок:
  • Verify all RCA connections between the harness and the ampкөтөргүч коопсуз.
  • экендигин текшериңиз amplifier is receiving power and is properly grounded.
  • Ensure the remote turn-on wire (blue 'REM' wire) is correctly connected and providing a signal to the ampөмүрлүү.
  • Confirm the 23-pin connector is fully seated in the Ride Command unit.
  • текшерүү amplifier's settings (gain, crossover, input selection).
• Distorted or Poor Audio Quality:
  • Inspect RCA cables for damage or loose connections.
  • үчүн туура жерге туташтырууну камсыз кылуу ampөмүрлүү.
  • Check for any kinks or severe bends in the harness wiring.
  • Тууралоо amplifier gain settings to prevent clipping.
• Ampкөтөргүч күйбөй жатат:
  • Verify the remote turn-on wire connection.
  • текшерүү amplifier's power and ground connections.
  • Ensure the vehicle's ignition is on and the Ride Command unit is active.

If problems persist, consult a professional audio installer or contact UTV Stereo customer support.

7. Техникалык шарттар

8. Кепилдик маалыматы

Specific warranty details for the UTV Stereo Polaris Ranger 1500 & Xpedition Ride Command RCA Output Harness are typically provided by the manufacturer or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims.

For the most accurate and up-to-date warranty information, please refer to the documentation included with your product or visit the official UTV Stereo webсайт.

9. Кардарларды колдоо кызматы

For technical assistance, installation questions, or any other inquiries regarding your UTV Stereo Polaris Ranger 1500 & Xpedition Ride Command RCA Output Harness, please contact UTV Stereo directly.

• Өндүрүүчү: UTVS-JBL-RC-RCA-OUT
• Бренд: UTV стерео
• Интернет дүкөн: Visit the UTV Stereo Store on Amazon

Please have your product model number (UTVS-JBL-RC-RCA-OUT) and purchase details ready when contacting support.