Klein Tools BLS18 Hex Key Wrench Set User Manual

1. Киришүү

This manual provides instructions for the safe and effective use of the Klein Tools BLS18 Hex Key Wrench Set. This set includes 18 color-coded hex keys in both SAE and Metric sizes, designed for various fastening applications. The L-style, long-arm design with ball ends enhances accessibility and leverage.

2. Коопсуздук маалыматы

Кол менен жасалган шаймандарды колдонууда ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Көздүн жаракат алышын алдын алуу үчүн коопсуздук көз айнеги сыяктуу жеке коргонуу каражаттарын кийиңиз.
• Ensure the hex key size matches the fastener to prevent stripping the fastener head or damaging the tool.
• Do not use hex keys with power tools unless specifically designed for such use.
• Avoid applying excessive force that could bend or break the hex key.
• Ишенимдүү кармоо үчүн шаймандарды таза жана майсыз кармаңыз.
• Store hex keys in their caddy when not in use to prevent loss and maintain organization.

3. Пакеттин мазмуну

The Klein Tools BLS18 Hex Key Wrench Set includes the following 18 pieces, organized in a compact caddy:

• SAE Sizes: 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch
• Metric Sizes: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm

4. Продукциянын өзгөчөлүктөрү

Key features of the BLS18 Hex Key Wrench Set include:

• Түстүү жеңдер: Each hex key features a distinct color sleeve for quick and easy identification of SAE and Metric sizes.
• Extra-Long Arms: The extended length provides increased reach and leverage for fasteners in confined spaces.
• Жакшыртылган комфорт: Plastic sleeves on the round shanks offer improved grip and comfort during prolonged use.
• Ball-End Design: Allows for optimal performance and fastening at angles up to 25 degrees, improving access to difficult-to-reach fasteners.

5. Орнотуу

The hex keys are pre-assembled in their respective caddies. No additional setup is required before use.

1. Identify Size: Locate the desired hex key by its color-coded sleeve and printed size marking.
2. Remove from Caddy: Gently pull the selected hex key from its slot in the caddy. The caddy is designed to hold the keys securely, so a firm pull may be necessary.

6. Иштөө нускамалары

Туура иштөө үчүн бул кадамдарды аткарыңыз:

1. Туура өлчөмдү тандоо: Match the hex key to the fastener head. A snug fit is crucial to prevent damage.
2. Ачкычты киргизүү: Insert the hex key fully into the fastener head. For angled access, use the ball end. For maximum torque and to prevent stripping, use the straight end when possible.
3. Моментти колдонуу: Turn the hex key clockwise to tighten or counter-clockwise to loosen the fastener. Apply steady, even pressure.
4. Ачкычты алып салуу: Once the task is complete, remove the hex key from the fastener.
5. Return to Caddy: Place the hex key back into its designated slot in the caddy for organized storage.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and performance of your hex key set:

• Тазалоо: Wipe hex keys clean after each use to remove dirt, grease, or debris. A dry cloth is usually sufficient. For stubborn grime, a mild solvent can be used, followed by thorough drying.
• Сактагыч: Always store the hex keys in their provided caddy in a dry environment to prevent rust and corrosion. Avoid storing in areas with high humidity or extreme temperatures.
• Текшерүү: Periodically inspect hex keys for signs of wear, bending, or damage. Replace any damaged keys to ensure safe and effective operation.

8. Кыйынчылыктарды

Жалпы маселелер жана аларды чечүү жолдору:

• Difficulty Removing Keys from Caddy: The caddy is designed for a secure fit. Apply firm, steady pressure when pulling a key out. If a key is excessively tight, ensure it is aligned correctly.
• Stripping Fastener Head: This usually occurs if the hex key size does not perfectly match the fastener, or if excessive rotational force is applied without proper engagement. Ensure the correct size is used and the key is fully seated.
• Hex Key Bending/Breaking: This indicates excessive force or using the tool beyond its intended capacity. Always use the correct tool for the job and avoid using hex keys as pry bars.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For information regarding product warranty, returns, or technical support, please refer to the official Klein Tools webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Visit the Klein Tools official webсайт: Клейн куралдар дүкөнү