Vector Optics Continental x10 1-10x28 ED CTR Riflescope

Introduction

Thank you for choosing the Vector Optics Continental x10 1-10x28 ED CTR Riflescope. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your new riflescope. Designed for precision and durability, this riflescope features German Schott Glass, Extra-Low Dispersion (ED) optics, and a First Focal Plane (FFP) reticle, making it suitable for various shooting applications including hunting, sporting, and competition.

Please read this manual thoroughly before using the riflescope to ensure optimal performance and longevity.

The Vector Optics Continental x10 1-10x28 ED CTR Riflescope, showcasing its robust construction and clear optics.

Орнотуу жана орнотуу

Proper mounting is crucial for accuracy and consistent performance. Ensure your rifle is unloaded and safe before proceeding.

1. Mounting Rings: Use high-quality 34mm mounting rings appropriate for your rifle's rail system. Ensure the rings are securely fastened to the rail.
2. Scope Placement: Place the riflescope into the lower half of the rings. Adjust the scope forward or backward to achieve optimal eye relief (approximately 4 inches for this model) when in your natural shooting position.
3. Түздөө: Use a scope leveling kit or a plumb bob method to ensure the reticle is perfectly level with the rifle. This prevents windage errors at long distances.
4. Tightening Rings: Once eye relief and reticle level are set, tighten the top halves of the rings evenly and gradually, following the manufacturer's torque specifications for your rings. Do not overtighten.
5. Диоптрияны тууралоо: Look through the scope at a plain, bright background (like a wall or the sky). Rotate the diopter adjustment ring (located on the eyepiece) until the reticle appears sharp and clear. This adjustment is for your eye, not for focusing on targets.

Side view of the riflescope, showing the magnification adjustment ring on the eyepiece.

Иштөө нускамалары

Чоңойтууну тууралоо

The Continental x10 features a 1-10x magnification range. Rotate the magnification ring, located near the eyepiece, to adjust the power. The First Focal Plane (FFP) reticle ensures that the reticle subtensions remain accurate across all magnification settings.

The full profile of the riflescope, highlighting the magnification ring and turret system.

Reticle and Illumination

This riflescope utilizes an etched VET-CTR BDC Reticle. The reticle is located in the First Focal Plane (FFP), meaning its size scales with magnification, allowing for consistent holdovers and ranging at any power setting. The reticle features 11 levels of red illumination for use in low-light conditions. Rotate the illumination knob, typically located on the left side turret, to adjust brightness or turn off the illumination.

А ачык view of the VET-CTR BDC Reticle, showing its detailed markings for ballistic compensation.

Detailed diagram of the VET-CTR BDC Reticle with specific MIL measurements for precise aiming.

Шамалдын жана бийиктиктин жөндөөлөрү

The riflescope features precise 1/10 MIL adjustments for both windage and elevation. The turrets are equipped with a Zero Stop and Turret Lock mechanism to prevent accidental adjustments and allow for quick return to zero.

• Бийиктик мунарасы: Located on top of the scope. Rotate the turret to adjust the point of impact vertically. Each click represents 0.1 MIL. The turret has 100 clicks per round.
• Windage Turret: Located on the right side of the scope. Rotate the turret to adjust the point of impact horizontally. Each click represents 0.1 MIL.
• Нөл токтотуу: After zeroing your rifle, set the zero stop according to the instructions provided with the scope or by the manufacturer. This allows you to dial down to your zero setting without going past it.
• Turret Lock: To lock the turrets, push down on the turret cap. To unlock, pull up. Always ensure turrets are locked when not making adjustments to prevent unintentional changes.

Жакын план view of the elevation turret, showing the click adjustments and "UP" indicator.

Деталдаштырылган view of both windage and elevation turrets, illustrating their markings and locking mechanism.

Техникалык тейлөө жана кам көрүү

Proper maintenance will extend the life and performance of your riflescope.

• Тазалоочу линзалар: Use a soft brush or compressed air to remove dust and debris. For smudges, use a lens cleaning cloth and optical cleaning solution. Never use harsh chemicals or abrasive materials.
• Тазалоочу орган: Дүрбөлгүчтүн корпусун жумшак, d менен сүртүңүзamp cloth. Avoid getting water into the turrets or other moving parts.
• Сактагыч: Store the riflescope in a cool, dry place, preferably in its original packaging or a padded case, away from direct sunlight and extreme temperatures.
• Суу каршылык: While the scope is designed to be water-resistant, avoid prolonged submersion. Dry thoroughly if exposed to moisture.

Проблемаларды чечүү

Техникалык шарттар

• Модел: SCFF-47
• Чоңойтуу: 1-10x
• Объективдүү линзанын диаметри: 28мм
• Tube Диаметри: 34мм
• Оптика: ED Glass, German Schott Glass
• Жарык өткөрүү: 93%
• Ретикула: VET-CTR BDC, Etched Glass, First Focal Plane (FFP)
• Жарыктандыруу: 11 Levels Red
• Көздү жеңилдетүү: Constant 4 inches
• Adjustment Click Value: 1/10 MIL
• Clicks per Round: 100
• Өзгөчөлүктөрү: Zero Stop, Turret Lock
• Материал: 6061 T6 Aluminum (Monotube), 7075 T6 (Adjustment System)
• Артка каршылык: Tested to Lapua Magnum .338
• Түсү: Кара

Кепилдик маалымат

Vector Optics provides a Өмүр бою кепилдик for this product. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the official Vector Optics webсайтка же кардарларды тейлөөгө кайрылыңыз.

Колдоо жана Байланыш

For further assistance, technical support, or warranty claims, please contact Vector Optics customer service or visit their official webсайт.

Официалдуу Webсайт: www.vectoroptics.com

Amazon дүкөнү: Vector Optics Amazon Store