Teamson Home Stratford дубал шкафы (ELG-587SG модели) үчүн колдонмо

1. Киришүү

Thank you for choosing the Teamson Home Stratford Wall Cabinet. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new cabinet. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Маанилүү коопсуздук маалыматы

• Always secure the cabinet to the wall to prevent tip-over. Failure to do so can result in serious injury.
• Exercise caution when opening and closing the louvered door to avoid finger trapping.
• Ensure all hardware is securely fastened before use. Periodically check fasteners for tightness.
• Do not overload the cabinet or shelves. Refer to the specifications section for weight limits if available.
• Майда тетиктерди жана таңгактоочу материалдарды чогултуу учурунда балдардан алыс кармаңыз.

2. Пакеттин мазмуну

Монтаждоодон мурун, төмөндө келтирилген бардык компоненттер бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, кардарларды колдоо менен байланышыңыз.

• Wall Cabinet Panels (various pieces for frame, door, back panel)
• Жөнгө салынуучу текче (1)
• Mounting Hardware (screws, wall anchors, cam locks, dowels, etc.)
• Door Knob (1)
• Hinges (2)

3. Монтаждоо боюнча нускамалар

Assembly typically requires two adults. Follow these steps carefully.

Керектүү куралдар

• Филлипс баш бурагычы
• Балка (милдеттүү эмес, дюбель үчүн)
• Drill with appropriate bit for wall anchors (for installation)
• Деңгээл
• Өлчөө лентасы
• Карандаш

Кадамдык Ассамблея

1. Бөлүктөрдү таңгактан чыгаруу жана аныктоо: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided diagram (if included).
2. Attach Cam Bolts: Screw cam bolts into the designated holes on the side panels and top/bottom panels. Do not overtighten.
3. Connect Side Panels to Bottom Panel: Insert dowels and cam bolts from the side panels into the corresponding holes on the bottom panel. Secure with cam locks.
4. Арткы панелди орнотуу: Slide the back panel into the grooves of the assembled frame. Secure with small screws if provided.
5. Жогорку панелди тиркөө: Connect the top panel to the side panels using dowels, cam bolts, and cam locks.
6. Assemble Door: Attach hinges to the cabinet door and then to the main cabinet frame. Ensure the door opens and closes smoothly.
7. Install Door Knob: Attach the door knob to the cabinet door.
8. Insert Adjustable Shelf Pins: Place the shelf support pins into the desired holes inside the cabinet.
9. Place Adjustable Shelf: Rest the adjustable shelf on the installed pins.

4. Орнотуу боюнча нускамалар

This cabinet is designed for wall mounting in a corner. Proper installation is crucial for stability and safety.

Дубалга орнотуу

1. Жайгашкан жерди тандоо: Select a corner on a sturdy wall. Ensure there are no electrical wires or plumbing pipes behind the wall where you plan to drill.
2. Орнотуу пункттарын белгилөө: Hold the cabinet in the desired position against the wall. Use a pencil to mark the locations of the pre-drilled mounting holes on the back of the cabinet onto the wall. Use a level to ensure the marks are aligned horizontally.
3. Бургулоочу тешиктер: Using a drill bit appropriate for your wall type and the provided wall anchors, drill pilot holes at the marked locations.
4. Дубал анкерлерин кыстаруу: Gently tap the wall anchors into the pilot holes until they are flush with the wall surface.
5. Тоолуу кабинет: Align the cabinet's mounting holes with the installed wall anchors. Insert the mounting screws through the cabinet's back panel and into the wall anchors. Tighten securely with a Phillips head screwdriver. Do not overtighten to avoid damaging the cabinet or wall.
6. Туруктуулукту текшерүү: Gently pull on the cabinet to ensure it is firmly attached to the wall and does not wobble.

5. Иштөө нускамалары

The Teamson Home Stratford Wall Cabinet is designed for convenient storage in various rooms.

Adjusting the Shelf

The cabinet features one adjustable shelf, allowing you to customize storage space according to your needs.

1. Текчени бошотуңуз: Remove all items from the adjustable shelf.
2. Текчени алып салуу: Carefully lift the shelf off its support pins.
3. Пиндерди жайгаштыруу: Remove the shelf support pins and reinsert them into the desired set of holes along the cabinet's interior sides. Ensure pins are at the same height on both sides.
4. Текче кайра салыңыз: Place the shelf back onto the newly positioned support pins.

6. Техникалык тейлөө

Туура кам көрүү сиздин кабинетиңиздин узак мөөнөттүү жана көрүнүшүн камсыз кылат.

• Тазалоо: Wipe the cabinet surfaces with a dry cloth. Avoid exposure to excessive moisture, as this can damage the engineered wood. Do not use harsh chemicals or abrasive cleaners.
• Текшерүүлөр: Мезгил-мезгили менен бардык бурамалар жана бекиткичтер бекем болушу үчүн текшерип туруңуз. Керек болсо кайра тартыңыз.
• Түздөн-түз күндүн нурунан качуу: Түз тийген күн нурунун узакка созулушу өңү өчүп же өңүнүн өзгөрүшүнө алып келиши мүмкүн.

7. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

8. Техникалык шарттар

Key technical details for the Teamson Home Stratford Wall Cabinet.

9. Кепилдик жана колдоо

For warranty information or customer support regarding your Teamson Home Stratford Wall Cabinet, please refer to the documentation included with your purchase or visit the official Teamson Home website. If you have questions about assembly, missing parts, or product functionality, please contact Teamson Home customer service directly.

Байланыш маалыматы: Өндүрүүчүсүнө кайрылыңыз website or your purchase receipt for the most current customer service contact details.