SmallRig CH3 видео суюктук башынын колдонуу боюнча колдонмосу

1. Киришүү

The SmallRig CH3 Video Fluid Head is a compact and portable solution designed for smooth and precise camera movements. Weighing only 271g (0.6lb) and supporting a maximum load of 3kg (6.6lb), it is ideal for DSLRs, mirrorless cameras, and small camcorders. This manual provides detailed instructions for the proper setup, operation, and maintenance of your CH3 Video Fluid Head.

1-сүрөт: Негизги view of the SmallRig CH3 Video Fluid Head.

2. Кутуда эмне бар

• Video Head × 1
• Аллен ачкычы × 2
• Кепилдик картасы × 1

Figure 2: Contents included in the SmallRig CH3 package.

3. Өзгөчөлүктөрү

• Компакт жана көчмө: Weighs only 271g (0.6lb) with a maximum load capacity of 3kg (6.6lb). Its dimensions are 240mm*55mm*85mm, making it highly portable for various shooting scenarios.
• Pan and Tilt Adjustment: Features fixed damping for smooth operation. The head offers a +90°/-70° tilt range and a full 360° swivel for multi-angle video shooting.
• Quick Release Plate: Equipped with an Arca-Swiss compatible quick release plate. This plate supports switching mounting directions and is compatible with camera cages and L-brackets, allowing for rapid transitions between handheld and tripod setups.
• Removable Telescopic Handle: The handle is detachable and can be installed on either the left or right side, as well as on the front or back, enhancing storage convenience and portability.
• Кеңири шайкештик: The quick-release plate features a 1/4"-20 screw for direct camera or cage mounting. The base has a 3/8" threaded hole for compatibility with most tripods and monopods. An additional anti-deflection 1/4"-20 threaded hole supports accessories like magic arms.

Figure 3: The CH3 head is compact and supports up to 3kg (6.6lb).

Figure 4: Stepless adjustment allows for smooth 360° pan and +90°/-70° tilt.

4. Орнотуу

4.1 Mounting the Video Head to a Tripod

1. Ensure your tripod has a 3/8" mounting screw.
2. Align the 3/8" threaded hole on the base of the CH3 Video Fluid Head with the tripod's mounting screw.
3. Rotate the video head clockwise until it is securely fastened to the tripod.

4.2 Тез ажыратуучу пластинаны камераңызга бекитүү

1. Locate the 1/4"-20 screw on the quick release plate.
2. Align this screw with the tripod mounting hole on the bottom of your camera or camera cage.
3. Use one of the provided Allen wrenches to tighten the screw securely.

4.3 Attaching the Camera to the Video Head

1. Ensure the quick release clamp on the video head is open.
2. Slide the quick release plate (with your camera attached) into the clamp on the video head.
3. Tighten the quick release knob until the camera is firmly secured. The Arca-Swiss design ensures a stable connection.

Figure 5: The integrated Allen wrench facilitates quick adjustments for the quick release plate.

4.4 Installing the Telescopic Handle

1. Identify the handle mounting port on the side of the video head.
2. Insert the telescopic handle into the port.
3. Tighten the handle's locking knob to secure it in place. The handle can be positioned on either side or adjusted for angle.

Figure 6: The detachable handle can be adjusted for optimal comfort and control.

5. Иштөө нускамалары

5.1 Adjusting Pan Movement

The CH3 Video Fluid Head offers a 360° panoramic swivel. The fixed damping ensures smooth, controlled horizontal movements. Use the pan tension knob (if present) to fine-tune resistance or lock the head in position. The base features degree markings for precise panoramic shots.

Figure 7: The 360° panning design allows for panoramic photography.

5.2 Adjusting Tilt Movement

The fluid head allows for a tilt range of +90° to -70°. The fixed damping provides consistent resistance for smooth vertical camera movements. Use the tilt locking knob to secure the camera at your desired vertical angle.

Figure 8: Seamless damping control enables steady shots from -70° to 90° tilt.

5.3 Utilizing Accessory Mounts

The anti-deflection 1/4"-20 threaded hole on the side of the head allows for the attachment of various accessories, such as magic arms for monitors or lights. Ensure accessories are securely fastened to prevent accidental detachment.

Figure 9: The anti-deflection 1/4"-20 threaded hole supports multiple accessories.

6. Техникалык тейлөө

• Тазалоо: Wipe the fluid head with a soft, dry cloth after each use to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Майлоо: The fluid damping system is factory-sealed and does not require user lubrication.
• Screw Checks: Periodically check all screws and knobs to ensure they are tight. Use the provided Allen wrenches for any adjustments to the quick release plate screw.
• Сактагыч: Store the fluid head in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Кыйынчылыктарды

• Sticky Pan/Tilt Movement: Ensure all locking knobs are fully loosened. If the issue persists, check for any obstructions or debris in the movement mechanisms. The fixed damping is designed for smooth resistance, but excessive stickiness may indicate an internal issue.
• Камера коопсуз эмес: Verify that the quick release plate is correctly seated in the clamp and the quick release knob is fully tightened. Ensure the 1/4"-20 screw attaching the plate to your camera is also tight.
• Handle Loose: Re-tighten the locking knob on the telescopic handle. If the handle feels wobbly, ensure it is fully inserted into its mounting port.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and customer support, please refer to the included Guarantee Card. You may also visit the official SmallRig webкошумча жардам жана продуктуну каттоо үчүн сайт.