Korg Multi/Poly аналогдук моделдөө синтезаторунун колдонуучу колдонмосу

Introduction

The Korg Multi/Poly is a next-generation analog modeling synthesizer inspired by the legendary Mono/Poly. It features four stacked oscillators, flexible X-mod and sync routing, and a built-in KAOSS Pad for dynamic sound manipulation. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Multi/Poly synthesizer.

1-сүрөт: Жогорку view of the Korg Multi/Poly Analog Modeling Synthesizer.

Жайгашуу

Before you begin using your Korg Multi/Poly, ensure it is properly set up. This section guides you through the initial connections and power-on procedures.

Физикалык байланыштар

Connect the included power adapter to the DC 12V input on the rear panel. For audio output, use 1/4\" Jack cables to connect the L/MONO and R outputs to your mixer, audio interface, or amplifier. MIDI In/Out ports are available for connecting to other MIDI-equipped instruments or your computer. A USB port is also provided for direct connection to a computer for data transfer and software control.

Figure 2: Rear panel showing power input, MIDI ports, USB port, and audio outputs.

Баштапкы күйгүзүү

Once all connections are secure, press the power button located on the rear panel. The display will illuminate, and the synthesizer will initialize. Allow a few moments for the system to fully boot before beginning operation.

Иштөө нускамалары

The Korg Multi/Poly offers extensive sound design capabilities. This section details how to utilize its core features.

Next-level Analog Modeling

The Multi/Poly features next-generation analog modeling technology, allowing for rich and complex sound creation. It includes four powerful oscillators per program, offering Classic, Digital, and Waveshaper types. The dual modeled filters, inspired by vintage Korg synthesizers, provide versatile sound shaping. The virtual voice card system simulates subtle variations found in real analog hardware, resulting in naturally rich timbres.

Structure & Modulation

Each program starts with four oscillators, a noise generator, ring modulator, sync, and cross-mod. These can be processed through two independent filters and modulated with four loopable envelopes, five LFOs, and six mod processors. Complex per-voice motion can be added with multi-lane Motion Sequencing 2.0, and real-time modulation is possible using simple gestures with KAOSS Physics.

3-сүрөт: Бурчтуу view highlighting the control panel and keybed.

Эффекттер

The Multi/Poly includes three studio-quality insert effects, master reverb, and EQ to add the finishing touches to your sounds. These effects can be applied and adjusted to enhance the overall sonic character.

Sound Design & Randomization

For inspiration, the intelligent randomization feature can instantly generate new sounds. You can randomize the entire sound or focus on specific elements like oscillators, filters, or effects. This provides a powerful tool for creative exploration.

Техникалык тейлөө

To ensure the longevity and optimal performance of your Korg Multi/Poly, follow these maintenance guidelines:

• Тазалоо: Use a soft, dry cloth to clean the plastic body and controls. Avoid abrasive cleaners or solvents.
• Сактагыч: Store the synthesizer in a cool, dry place away from direct sunlight and extreme temperatures. Use the custom-made soft case for transport and storage to protect it from dust and physical damage.
• Программалык камсыздоо жаңыртуулары: Periodically check the Korg website for firmware updates and new versions of the Editor/Librarian software to ensure your device has the latest features and bug fixes.

Figure 4: The Korg Multi/Poly fits securely in its custom soft case for protection and portability.

Проблемаларды чечүү

If you encounter issues with your Korg Multi/Poly, refer to the following common troubleshooting tips:

• Кубат жок: Ensure the power adapter is securely connected to both the synthesizer and a working power outlet. Check if the power button is in the 'ON' position.
• Үн жок: Verify that audio cables are correctly connected to the L/MONO and R outputs and to your monitoring system. Check the volume levels on the Multi/Poly and your external audio equipment. Ensure that the 'Layers' are active and oscillators are turned 'ON' for the selected program.
• MIDI көйгөйлөрү: Confirm MIDI cables are correctly connected (MIDI OUT to MIDI IN, and vice-versa). Check MIDI settings on both the Multi/Poly and your external device/software.
• Software Connectivity: Ensure the USB cable is properly connected. Restart both the Multi/Poly and your computer. Check the Editor/Librarian software for device recognition.

For more complex issues, consult the full online manual or contact Korg customer support.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, расмий Korg компаниясына кайрылыңыз website or contact your authorized Korg dealer. Keep your proof of purchase for warranty claims.