diymore Wireless Thermostat Socket Instruction Manual

1. Introduction and Overview

This manual provides detailed instructions for the diymore Wireless Thermostat Socket, Model KABB0017-AAA. This device consists of a wireless transmitter (thermostat unit) and a plug-in receiver (socket) with an integrated temperature sensor. It is designed for controlling heating or cooling appliances to maintain a desired temperature in a room. No complex installation or wiring is required; simply plug and play.

The thermostat offers both heating and cooling modes, a clear LCD with backlight, and a child lock function for safety.

2. Продукциянын компоненттери

The diymore Wireless Thermostat Socket system includes two main components:

• Transmitter (Thermostat Unit): This portable unit features an LCD display, control buttons, and an integrated temperature sensor. It requires 2 AA batteries (not included).
• Receiver (Plug-in Socket): This unit plugs directly into a standard wall socket and controls the power supply to your heating or cooling appliance. It has an ON/OFF button and an LED indicator.

3. Орнотуу

3.1 Battery Installation (Transmitter)

1. Open the battery compartment cover on the back of the transmitter unit.
2. Insert 2 x AA 1.5V batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover. The LCD display should light up, showing the current temperature and time in standby mode.

3.2 Pairing the Transmitter and Receiver (Code Matching)

Өткөргүч менен кабыл алгычтын ортосундагы байланышты орнотуу үчүн:

1. Plug the receiver into a standard household wall socket.
2. Press and hold the ON/OFF button on the receiver for 2 seconds. The LED indicator on the receiver will flash, indicating it is in pairing mode.
3. Өткөргүчтө баскычын басыңыз ылдый button for 3 seconds. The LED indicator on the receiver should light up steadily and then turn off, confirming successful pairing.
4. If pairing is unsuccessful, ensure the transmitter and receiver are within range (up to 20 meters in an open area) and repeat the steps.

Note: The plug-in receiver must be paired. If you wish to use a new remote thermostat or add more plug-in receivers, repeat the pairing steps for each new device. A single thermostat sender can control an unlimited number of plug-in receivers.

4. Иштөө нускамалары

4.1 Негизги операция

• Күйгүзүү/өчүрүү: басыңыз КҮЧ button on the transmitter to switch between standby mode and standard operating mode.
• Маалыматты көрсөтүү: The LCD shows the current temperature, target temperature, and the clock/program status.

4.2 Setting Clock and Calendar

1. басып, кармап туруңуз SET button for 3 seconds to enter the clock setting mode.
2. колдонуу UP / ылдый buttons to select the day of the week (MO-SU), then press OK.
3. колдонуу UP / ылдый buttons to select 12-hour or 24-hour time format, then press OK.
4. колдонуу UP / ылдый buttons to set the hour, then press OK.
5. колдонуу UP / ылдый buttons to set the minute, then press OK.
6. To reset minutes to 0, press OK.
7. колдонуу UP / ылдый buttons to select the temperature unit (°C or °F), then press OK ырастоо жана орнотуу режиминен чыгуу үчүн.

4.3 Selecting Heating or Cooling Mode

1. басып, кармап туруңуз UP button for 3 seconds to switch between Heating Mode (indicated by a flame symbol 🔥) and Cooling Mode (indicated by a snowflake symbol ❄).
2. колдонуу UP / ылдый buttons to select either the flame symbol for heating or the snowflake symbol for cooling.
3. Басыңыз OK тандооңузду ырастоо үчүн.

4.4 Setting Programs (P1-P8)

The thermostat supports 8 programmable periods (P1-P8) for both heating and cooling. P1-P4 are for heating programs, and P5-P8 are for cooling programs.

1. басыңыз SET button to access the program ON/OFF selection. The 'ON' symbol (standard) is activated.
2. колдонуу UP / ылдый buttons to select 'ON' or 'OFF'.
   • If 'ON' is selected, all programs (P1-P8) are simultaneously active. A 'P' will be displayed next to the time.
   • If 'OFF' is selected, all P1-P8 programs are immediately deactivated, and the 'P' symbol disappears. Only standard heating or cooling will function.
3. Басыңыз OK ырастоо үчүн.

To adjust individual program settings (e.g., specific times and target temperatures for P1-P8), refer to the detailed programming section in the full manual (not fully provided in the source images, but typically involves pressing SET multiple times to cycle through program settings).

4.5 Балдарды кулпулоо функциясы

The child lock prevents accidental changes to settings.

• Жандандыруу: The child lock automatically activates if there is no button operation for 10 minutes in any mode (except standby mode). A lock symbol (🔒) will appear on the LCD.
• Өчүрүү: To deactivate the child lock, press and hold the ылдый баскычын 3 секунда басыңыз.

5. Өзгөчөлүктөрү

The diymore Wireless Thermostat Socket offers a range of features for convenient and efficient temperature control:

• Зымсыз башкаруу: Transmitter and receiver communicate wirelessly, allowing flexible placement of the thermostat unit. Maximum control distance is 20 meters in an open area.
• Жылытуу жана муздатуу режимдери: Supports both heating (P1-P4 programs) and cooling (P5-P8 programs) appliances.
• Кең температура диапазону: Operates within a temperature range of 0°C to 60°C (32°F to 140°F).
• LCD арткы жарык: Green backlight ensures clear visibility of the display in various lighting conditions.
• Убакытты көрсөтүү: 12 сааттык жана 24 сааттык убакыт форматтарын колдойт.
• Температура бирдигин тандоо: Цельсий (°C) жана Фаренгейт (°F) ортосунда которулуңуз.
• Балдар кулпусу: Prevents unintended operation by locking the controls.
• Энергияны үнөмдөө: Designed for efficient operation to help manage energy consumption.

6. Техникалык тейлөө

6.1 Батареяны алмаштыруу

When the battery indicator on the LCD shows low power, replace the 2 AA batteries in the transmitter unit. Ensure correct polarity.

6.2 Тазалоо

Wipe the thermostat and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the devices.

7. Кыйынчылыктарды

7.1 Operating Principle (Heating Mode)

• If the current temperature is greater than or equal to the target temperature (ACTUAL ≥ TARGET), the flame symbol is displayed, and the connected heating device switches on to raise the room temperature.
• When the current temperature reaches the target temperature (ACTUAL = TARGET), the flame symbol disappears, and the thermostat sends an OFF command to switch off the heating device.
• If the current temperature drops below the target temperature by 1°C / 1.8°F (ACTUAL < TARGET - 1°C/1.8°F), the heating device switches on again.
• In standby mode, the thermostat maintains the room temperature within the range: (Target temperature - 1°C/1.8°F) ≥ Room temperature ≥ Target temperature.

7.2 Operating Principle (Cooling Mode)

• If the current temperature is less than or equal to the target temperature (ACTUAL ≤ TARGET), the snowflake symbol is displayed, and the connected cooling device switches on to lower the room temperature.
• When the current temperature reaches the target temperature (ACTUAL = TARGET), the snowflake symbol disappears, and the thermostat sends an OFF command to switch off the cooling device.
• If the current temperature rises above the target temperature by 1°C / 1.8°F (ACTUAL > TARGET + 1°C/1.8°F), the cooling device switches on again.
• In standby mode, the thermostat maintains the room temperature within the range: Target temperature ≤ Room temperature ≤ (Target temperature + 1°C/1.8°F).

7.3 Калыбына келтирүү функциясы

To restore the thermostat to factory settings:

1. Ensure the thermostat is in Heating or Cooling Mode (not standby).
2. басып, кармап туруңуз UP жана ылдый баскычтарын бир эле учурда 3 секунд басып.
3. The green backlight will flash 3 times, indicating that all settings have been deleted and factory defaults restored.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.