Hooke Road 6.3" Drop Down Running Boards Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Hooke Road 6.3" Drop Down Running Boards. These running boards are designed for 2015-2025 Chevrolet Colorado and GMC Canyon Crew Cab (4 Full Size Doors) pickup trucks. Please read all instructions carefully before beginning installation to ensure proper fitment and safe use.

2. Коопсуздук маалыматы

• Орнотуу учурунда ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз, анын ичинде коргоочу көз айнек жана кол каптар.
• Унаанын тегиз жерге токтотулганын жана кол тормозу иштеп турганын текшериңиз.
• Do not overtighten fasteners. Refer to torque specifications if available, or tighten securely.
• Verify all components are securely fastened before driving the vehicle.
• Regularly inspect the running boards and mounting hardware for any signs of wear, damage, or looseness.

3. Бөлүктөр тизмеси

Please verify all parts are present before beginning installation:

• 2 × Side Steps (Passenger and Driver Side)
• 6 × Монтаждоо кронштейндери
• Монтаждоочу аппараттык комплект
• Installation Instruction (this manual)

If any parts are missing or damaged, please contact Hooke Road customer support.

4. Керектүү куралдар

Орнотуу үчүн, адатта, төмөнкү шаймандар талап кылынат:

• Ratchet
• Socket Set (common sizes for automotive fasteners, typically 13mm, 16mm, 18mm)
• Ачкычтар топтому
• Torque Wrench (recommended for final tightening)

5. Орнотуу жана орнотуу

These running boards are designed for direct bolt-on installation to factory locations, requiring no drilling. If your vehicle has existing factory running boards, please remove them prior to installation.

5.1. Verify Vehicle Compatibility

These running boards are specifically designed for Crew Cab models (4 Full-Size Doors) of the 2015-2025 Chevrolet Colorado and GMC Canyon. They are жок compatible with Extended Cab models (2 Full-Size Front Doors).

5.2. Орнотуу кадамдары

Туура орнотуу үчүн бул кадамдарды аткарыңыз:

1. Identify Mounting Locations: Locate the factory mounting points along the rocker panel of your truck. There are typically three mounting points per side.
2. Кашаларды тиркөө: Secure the mounting brackets to the vehicle's frame using the provided hardware. Ensure the correct bracket (driver side/passenger side, front/middle/rear) is used for each location. Keep bolts hand-tight initially to allow for adjustment.
3. Чуркоо тактасынын абалы: Carefully lift the running board into position and align it with the attached brackets.
4. Чуркоо тактасын кашаалар менен бекитүү: Attach the running board to the brackets using the remaining hardware. Again, keep bolts hand-tight for now.
5. Жөнгө салуу жана деңгээл: Adjust the running board to ensure it is level and properly positioned along the vehicle's side.
6. Акыркы бекемдөө: Once satisfied with the alignment, fully tighten all mounting hardware to the manufacturer's recommended torque specifications.

5.3. Visual Aids for Installation

5.4. Орнотуу видеосу

Көрсөтмөлүү көрсөтмө үчүн, расмий орнотуу видеосун караңыз:

6. Иштөө нускамалары

The running boards provide a convenient step for easier entry and exit from your truck. They also offer robust side and undercarriage protection.

• Use the non-slip step pads to safely step into and out of your vehicle.
• Ensure your footwear has good grip, especially in wet or muddy conditions.
• Avoid placing excessive weight on the running boards beyond their rated capacity (350 lbs per side).

7. Техникалык тейлөө

To ensure the longevity and appearance of your Hooke Road running boards, follow these maintenance guidelines:

• үзгүлтүксүз тазалоо: Clean the running boards regularly with mild soap and water to remove dirt, mud, and road grime. Avoid harsh chemicals or abrasive cleaners that could damage the textured black powder coat finish.
• бекиткичтерди текшерүү: Periodically check all mounting bolts and nuts to ensure they remain tight. Retighten as necessary.
• Зыянды текшерүү: Inspect the running boards for any signs of physical damage, such as dents, bends, or rust. Address any issues promptly to prevent further deterioration.
• Коррозиядан коргоо: The textured black powder coat finish with premium E-coating provides excellent corrosion resistance. However, in harsh environments (e.g., areas with road salt), additional protective sprays can be applied if desired.

8. Кыйынчылыктарды

If you encounter any issues with your running boards, consider the following:

• Loose or Rattling Running Boards: Check all mounting hardware. Ensure all bolts are securely tightened. Over time, vibrations can cause fasteners to loosen.
• Даттын пайда болушу: While designed for corrosion resistance, exposure to harsh elements can lead to rust. Clean affected areas thoroughly and apply a rust-inhibiting paint or coating. Regular maintenance can help prevent this.
• Difficulty Stepping: Ensure the running boards are installed correctly and are level. Verify that the drop-down steps are not obstructed.

For persistent issues, please contact Hooke Road customer support.

9. Техникалык шарттар

10. Кепилдик

Хук Роуд камсыз кылат 2 жылдык Өндүрүүчүнүн Кепилдиги from the date of purchase for these running boards. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

11. Кардарларды колдоо кызматы

For any questions, technical assistance, or warranty claims, please contact Hooke Road customer support. We offer lifetime customer support for our products.

Webсайт: Visit the Hooke Road Store on Amazon

Please have your product model number (BXG.9101) and purchase information ready when contacting support.