Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Varstrom P860ML E-Bike Display. Please read this manual thoroughly before using the product to ensure proper function and safety. The P860ML display is designed for BAFANG electric bike motors utilizing the UART communication protocol (versions 5.0 to 5.8).
Шайкештик жана орнотуу
Шайкештик
The P860ML e-bike display is specifically designed for BAFANG mid-motors that use the UART communication protocol, versions 5.0 to 5.8. It features a 5-pin female connector for secure attachment. This display is not compatible with CAN protocol systems.
Сүрөт: This image illustrates the correct 5-pin female UART protocol connector required for the P860ML display, contrasting it with an incompatible CAN protocol connector. Ensure your BAFANG motor uses the UART protocol for proper function.
Орнотуу
The display holder is compatible with handlebar diameters of 22.2 mm, 25.4 mm, and 31.8 mm. Follow these steps for installation:
- Рулду даярдоо: Choose a suitable position on your e-bike handlebar for the display. Ensure it does not obstruct your view же велосипедди башкаруу.
- Attach Holder: Open the display holder clamp and place it around the handlebar. Use the provided non-slip mats if necessary to ensure a snug fit and prevent rotation.
- Secure Holder: Tighten the screws on the holder clamp until it is firmly secured to the handlebar. Do not overtighten.
- Дисплейди орнотуу: Slide the P860ML display onto the holder until it clicks into place.
- Кабелди туташтыруу: Locate the 5-pin female connector on the display cable and connect it to the corresponding male connector from your BAFANG motor system. Ensure the connection is secure and fully seated.
- Маршруттук кабелдер: Carefully route and secure all cables to prevent them from snagging or interfering with moving parts.
Сүрөт: This image shows the P860ML display mounted on an e-bike handlebar, illustrating its typical installed position and connection to the control buttons.
Сүрөт: Жакын план view of the P860ML display unit along with its remote button, highlighting the 5-pin connector. This shows the components you will be installing.
Функциялар жана функциялар
The Varstrom P860ML display offers a rich set of features designed to enhance your e-bike riding experience:
- High Contrast IPS Color Screen: Features a 3.5-inch IPS color matrix screen for clear visibility in various lighting conditions.
- Комплекстүү маалыматтарды көрсөтүү: Shows real-time speed (SPEED), average speed (AVG SPD), maximum speed (MAX SPD), odometer (ODO), trip distance, battery status, PAS level, error codes, and riding time.
- Жөнгө салынуучу арткы жарыктын жарыктыгы: Customize the backlight brightness with 5 levels to suit your environment, from low light to bright daylight. Includes an auto-sensing light feature.
- Multiple Assist Levels: Supports 3-level, 5-level, or 9-level pedal assist (PAS) modes, with UBE optional, allowing for fine-tuned power delivery.
- Көп тилдүү интерфейс: Supports German, French, English, Italian, Spanish, and Czech languages. English is the default, with easy switching.
- USB кубаттоо порту: Equipped with a 5V/500mA USB port for convenient emergency charging of mobile devices.
- Intelligent Battery Indicator: Provides a reliable and accurate display of your e-bike’s battery charge level.
- 6 km/h Walk Mode: A dedicated function for easy maneuvering of the e-bike while walking alongside it.
- Туруктуу курулуш: Encased in ABS+PC material with an IP65 water resistance rating, ensuring reliability in wet conditions.
- Ergonomic External Button Design: Easy to operate controls for intuitive interaction.
- Саат: Built-in battery keeps the time even when the display is off.
- Температурага сабырдуулук: Suitable for low temperatures, down to -20℃.
Сүрөт: This diagram labels the various indicators and sections of the P860ML display, including time, battery, speed, power, ODO, and maintenance indicators.
Сүрөт: This image demonstrates the multilingual capabilities of the P860ML display, showing options for English, German, French, Italian, Spanish, and Czech languages.
Сүрөт: This visual explains how to adjust the backlight brightness of the P860ML display for optimal visibility during both day and night riding conditions.
Орнотуу жана конфигурация
The P860ML display allows for various settings adjustments to personalize your riding experience. Access the settings menu using the external buttons.
Орнотууларга кирүү
Typically, a long press of the ‘M’ (Mode) button or a combination of buttons will enter the settings menu. Navigate through options using the ‘+’ and ‘-’ buttons and confirm selections with the ‘M’ button.
Негизги орнотуулар
- Тил: Select your preferred language (German, French, English, Italian, Spanish, Czech). Default is English.
- Система: General system settings.
- Жарыктык: Adjust the display backlight brightness (5 levels).
- Автоматтык түрдө өчүрүү: Configure the time after which the display automatically turns off due to inactivity.
- USB порт: Settings related to the USB charging function.
- Саат: Учурдагы убакытты коюңуз.
- Сахналар: Potentially allows switching between MODERN and CLASSIC display modes.
- PAS Level Mode: Choose between 0-3, 0-5, or 0-9 assist levels.
- Бирдиктер: Switch between Kilometers (KM) and Miles (MI) for speed and distance display.
Сүрөт: This image displays the main settings menu of the P860ML, showing options like Language, System, Brightness, Auto Off, USB Port, Clock, and Scenes.
Иштөө нускамалары
Familiarize yourself with the display’s controls for optimal use during your ride.
Негизги операциялар
- Күйгүзүү/өчүрүү: Press and hold the power button (usually the ‘M’ button) to turn the display on or off.
- PAS деңгээлин тууралаңыз: Use the ‘+’ and ‘-’ buttons to increase or decrease the pedal assist level. The current PAS level will be shown on the display.
- Фараны башкаруу: Long press the light button (often integrated with the ‘+’ button) to turn the e-bike’s headlight on or off.
- 6 km/h Walk Mode: Long press the ‘-’ button to activate the 6 km/h walk assist mode. The motor will provide low-speed assistance, useful when pushing the bike. Release the button to exit this mode.
- USB заряддоо: Connect your USB device to the USB charging port on the display. This port provides 5V/500mA for emergency charging.
- Information Display Toggle: Short press the ‘M’ button to cycle through different information displays such as ODO, Trip Distance, Riding Time, and Range.
Сүрөт: This image shows the main operational screen of the P860ML display, indicating where speed, PAS level, battery, and other key riding data are shown.
Техникалык тейлөө
Proper maintenance ensures the longevity and optimal performance of your P860ML display.
- Тазалоо: Дисплейдин экранын жана корпусун жумшак менен сүртүңүз, damp cloth. Do not use abrasive cleaners or solvents. Ensure the USB port cover is closed when not in use to prevent dust and moisture ingress.
- Суу каршылык: The display has an IP65 water resistance rating, meaning it is protected against low-pressure water jets from any direction. Avoid submerging the display in water or exposing it to high-pressure water sprays.
- Сактагыч: When not in use for extended periods, store the e-bike and display in a cool, dry place, away from direct sunlight and extreme temperatures.
- Кабелдик текшерүү: Periodically check all cables and connectors for any signs of wear, damage, or loose connections. Ensure the 5-pin connector is clean and free of debris.
Проблемаларды чечүү
If you encounter issues with your P860ML display, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей күйбөйт. | Low or dead e-bike battery; Loose cable connection; Faulty display or motor. | Charge e-bike battery. Check all cable connections, especially the 5-pin UART connector, ensuring they are fully seated. If problem persists, contact support. |
| No speed reading or incorrect speed. | Speed sensor dislodged or damaged; Magnet missing or misaligned. | Check the speed sensor and magnet on the wheel. Ensure the magnet passes closely by the sensor. Realign or replace if necessary. |
| Дисплей ката кодун көрсөтөт. | Specific system fault (e.g., motor, controller, battery). | Refer to your BAFANG motor manual for specific error code meanings. Common issues include motor overheating, sensor faults, or communication errors. Address the underlying issue or consult a technician. |
| USB кубаттоо иштебей жатат. | E-bike battery too low; USB cable faulty; Device not compatible. | Ensure e-bike battery has sufficient charge. Try a different USB cable and device. The port is for emergency charging and may not support all devices. |
For issues not listed here or if solutions do not resolve the problem, please contact Varstrom customer support.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | P860ML |
| Байланыш протоколу | UART (Versions 5.0-5.8) |
| Туташтыргыч түрү | 5 пин ургаачы |
| Экран түрү | 3.5-inch IPS Color Matrix Screen |
| Дисплей түрү | LCD, color display |
| Рутка шайкештиги | 22.2 мм, 25.4 мм, 31.8 мм |
| Иштөө температурасы | Up to -20℃ |
| Сууга туруктуулук рейтинги | IP65 |
| USB заряддоо порту | 5V/500mA |
| PAS деңгээли | 3-level, 5-level, 9-level (selectable) |
| Колдоого алынган тилдер | German, French, English, Italian, Spanish, Czech |
| Өлчөмдөрү (болжол менен) | 96.58mm (3.8") height, 63.78mm (2.51") width, 6.1mm (0.24") thickness |
Сүрөт: This image provides detailed dimensions of the P860ML display and lists key parameters such as voltage compatibility, holder sizes, speed limit, PAS levels, and USB charging capability.
Кепилдик жана колдоо
Кепилдик маалымат
The Varstrom P860ML display comes with a 30-day return policy and a 365-day repair or replacement warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
Кардарларды колдоо
For technical assistance, troubleshooting, or warranty claims, please contact Varstrom customer support through the retailer where you purchased the product or visit the official Varstrom webбайланыш маалыматы үчүн сайт.
When contacting support, please have your product model number (US JJ P860ML-UART Display) and purchase details ready.
