1. Коопсуздук боюнча маанилүү маалымат
Please read all safety instructions carefully before operating the Antminer L7. Failure to follow these instructions may result in electric shock, fire, or damage to the device.
- Электр камсыздоо: The Antminer L7 requires a 200-240В AC кирүү көлөмүtagд. Туура эмес көлөмдү колдонууtage (e.g., 110V) will likely cause severe damage to the miner.
- Электр кабели: Электр зымы КИРҮҮ ЭМЕС with the unit. Ensure you use an appropriate power cord rated for the required voltage жана ток.
- Вентиляция: Ensure adequate airflow around the miner to prevent overheating. Do not block air vents.
- Курчап турган чөйрө: Operate the miner within the specified temperature and humidity ranges.
- Кесиптик орнотуу: If you are unsure about electrical connections, consult a qualified electrician.
Image 1.1: Antminer L7 unit displaying a 220V AC warning label, emphasizing the required input voltagкоопсуз иштетүү үчүн e.
2. Продукт бүтүп калдыview
The BITMAIN Antminer L7 9050M is an ASIC (Application-Specific Integrated Circuit) miner designed for cryptocurrency mining, specifically targeting Litecoin (LTC) and Dogecoin (DOGE) using the Scrypt algorithm. It features high hashrate capabilities and an air-cooling system for stable operation.
Сүрөт 2.1: алдыңкы жагы view of the Antminer L7 ASIC miner, showcasing its compact design and integrated cooling fans.
Негизги өзгөчөлүктөрү
- Жогорку Hashrate: Delivers approximately 9050 MH/s for Scrypt algorithm mining.
- Энергия үнөмдүүлүгү: Operates at an efficiency of approximately 0.36 J/TH.
- Dual Crypto Mining: Capable of mining both Litecoin (LTC) and Dogecoin (DOGE) simultaneously.
- Air-Cooling System: Equipped with advanced cooling technology for maintaining optimal operating temperatures.
- Күчтүү дизайн: Built for continuous operation in demanding mining environments.
3. Техникалык шарттар
The following table details the technical specifications of the Antminer L7 9050M.
| Мүнөздүү | Нарк |
|---|---|
| Модел | L7 |
| Algorithm | Cryptocurrency | Scrypt | LTC+DOGE |
| Хешрейт | 9050 MH/s ±3% |
| Power on wall @77°F(25°C) | 3260 Вт ± 10% |
| Power efficiency on wall @77°F(25°C) | 0.36 J/TH ± 10% |
| Электр энергиясы AC Киргизүү томtage | 200~240 В |
| Power supply AC Input Frequency Range | 47~63 Гц |
| Электр булагы AC Киргизүүчү ток | 20 Amp |
| Тармакка туташуу режими | Ethernet 10/100M |
| Miner Size (L*W*H, w/o package) | 14.57 x 7.70 x 11.42 дюйм |
| Miner Size (L*W*H, with package) | 22.45 x 12.45 x 16.93 дюйм |
| Таза салмак | 29.77 фунт |
| Жалпы салмак | 33.07 фунт |
| Иштөө температурасы | 32~113°F (0~45°C) |
| Сактоо температурасы | -4~158°F (-20~70°C) |
| Муздатуу ыкмасы | Аба |
| Туташтыргыч түрү | C13/C14 |
| Форма фактору | ATX |
| Энергия менен жабдуунун дизайны | Модулдук эмес |
4. Орнотуу
4.1 Пакеттен чыгаруу
Carefully remove the Antminer L7 from its packaging. Inspect the unit for any signs of physical damage that may have occurred during transit. Retain the original packaging for future transport or warranty claims.
4.2 Кубат туташтыруу
The Antminer L7 requires a 200-240V AC power supply. Ensure your electrical infrastructure can provide this voltage and sufficient ampкарылык (20 Amp). Connect the appropriate C13/C14 power cables (not included) to the miner's power input ports and then to a suitable power outlet. Do not attempt to operate the miner on 110V AC.
Сүрөт 4.1: Арткы view of the Antminer L7, illustrating the power input ports and the arrangement of the cooling fans.
4.3 Тармактык туташуу
Connect an Ethernet cable from your network router or switch to the Ethernet port on the Antminer L7 control board. The miner supports 10/100M Ethernet connections.
Сүрөт 4.2: Жакын пландан view of the Antminer L7 control board, highlighting the Ethernet port, IP Report button, and status indicator lights (Fault, Normal).
4.4 Баштапкы конфигурация
After connecting power and network, power on the miner. You will typically access the miner's web interface via its IP address to configure mining pool settings, worker names, and passwords. Refer to the official BITMAIN documentation or support resources for detailed instructions on accessing and configuring the web интерфейс.
5. Операция
5.1 Starting the Miner
Once configured, the miner will automatically begin the mining process. Monitor the status indicator lights on the control board. A 'Normal' light indicates proper operation, while a 'Fault' light suggests an issue.
5.2 Аткарууну көзөмөлдөө
Regularly check the miner's performance through its web interface or your chosen mining pool dashboard. Key metrics to monitor include hashrate, temperature, and fan speed. Ensure these values remain within acceptable operating ranges.
5.3 Algorithm and Cryptocurrency
The Antminer L7 is designed to mine cryptocurrencies that utilize the Scrypt algorithm, primarily Litecoin (LTC) and Dogecoin (DOGE). It can mine both simultaneously, contributing to a diversified mining output.
6. Техникалык тейлөө
6.1 Тазалоо
Periodically clean the miner to prevent dust buildup on fans and heatsinks, which can impede cooling efficiency. Use compressed air to gently remove dust from the exterior and fan blades. Ensure the miner is powered off and unplugged before cleaning.
6.2 Экологиялык талаптар
Maintain the operating environment within the specified ranges:
- Иштөө температурасы: 32°F – 113°F (0°C – 45°C)
- Сактоо температурасы: -4°F – 158°F (-20°C – 70°C)
- Нымдуулук: Avoid high humidity environments to prevent condensation and potential damage to electronic components.
7. Кыйынчылыктарды
This section provides general guidance for common issues. For specific technical problems, refer to BITMAIN's official support resources.
- Miner Not Powering On: Verify power cable connections and ensure the power supply is receiving the correct 200-240V AC input. Check circuit breakers.
- Тармак туташуусу жок: Check the Ethernet cable connection. Ensure your router/switch is functioning correctly. Verify the miner's IP address and network settings.
- Low Hashrate: This can be caused by high temperatures, outdated firmware, incorrect mining pool settings, or hardware issues. Check temperatures and fan speeds.
- Ашыкча ысып кетүү: Ensure adequate ventilation. Clean dust from fans and heatsinks. Verify ambient room temperature is within operating limits.
- Fault Light On: A fault light indicates a hardware issue. Consult the BITMAIN support documentation for specific error codes or diagnostic procedures.
8. Кепилдик жана колдоо
For brand new BITMAIN Antminer units, warranty coverage is provided directly by BITMAIN. Customers are required to proactively contact BITMAIN's official website for assistance with warranty claims or technical support.
Restocking Fee Notice: Please be aware that for brand new BITMAIN Antminer units, if a return is not due to product quality issues, a 40% restocking fee may be applied. Carefully consider your purchase before making a decision.
For the latest support information, firmware updates, and detailed troubleshooting guides, please visit the official BITMAIN webсайт: www.bitmain.com
