RETROSUN WW918

RETROSUN алмаштыруучу пульт колдонуучусунун колдонмосу

For Twin Star ClassicFlame TRESANTI Electric Fireplace Heaters

1. Киришүү

This manual provides comprehensive instructions for the RETROSUN replacement remote control. It is designed to operate various Twin Star ClassicFlame TRESANTI Electric Fireplace Heater models. Please read this manual carefully before using the remote control to ensure proper function and longevity.

2. Шайкештик

This replacement remote control is compatible with the following Twin Star ClassicFlame TRESANTI Electric Fireplace Heater models:

To ensure compatibility, compare your original remote control with the image below. The replacement remote is designed to function identically to the original.

Comparison of original and replacement fireplace remote controls

Сүрөт 2.1: Comparison of the replacement remote (left) and the original remote (right). Ensure your original remote matches the design on the right for proper compatibility.

3. Орнотуу жана Батареяны орнотуу

The RETROSUN replacement remote control requires two (2) AAA 1.5V batteries (not included). No programming or pairing is required; simply install the batteries, and the remote is ready for use.

  1. Батарея бөлүмүн ачуу: Locate the battery cover on the back of the remote control. Slide the cover downwards to open.
  2. Батареяларды салыңыз: Эки (2) AAA 1.5V батарейканы салып, оң (+) жана терс (-) терминалдары бөлүмдүн ичиндеги белгилер менен туура дал келгенин текшериңиз.
  3. Батарея бөлүмүн жабуу: Батареянын капкагын бекем чыккыча ордуна жылдырыңыз.
Illustration of battery installation for the remote control

Сүрөт 3.1: Деталдаштырылган view of the battery compartment, showing the correct orientation for inserting two AAA batteries.

4. Иштөө нускамалары

The remote control utilizes infrared technology for communication with your fireplace heater. It offers a reliable operational distance of up to 8 meters (approximately 26 feet).

Remote control operating a fireplace from a distance

Сүрөт 4.1: The remote control in use, demonstrating an operational distance of 8 meters from the fireplace unit.

4.1 Баскыч функциялары

Толуктоо үчүн төмөнкү диаграмманы караңызview of the remote control buttons and their corresponding functions. The buttons are designed for intuitive control of your electric fireplace heater.

Diagram showing the functions of each button on the remote control

Сүрөт 4.2: Жакын план view of the remote control buttons, indicating their respective functions for power, flame effects, heat settings, and timer.

5. Техникалык тейлөө

Пульттун оптималдуу иштешин жана узак иштөөсүн камсыз кылуу үчүн:

6. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Алыстан жооп бербей жатат
  • Өлүк же туура эмес салынган батарейкалар.
  • Пульт менен каминдин ортосундагы тоскоолдук.
  • Пульт диапазондон тышкары.
  • Туура полярдуулукту камсыз кылуу менен батарейкаларды алмаштырыңыз.
  • Remove any objects blocking the infrared signal path.
  • Move closer to the fireplace heater (within 8 meters).
Кыскартылган иштөө диапазону
  • Батареянын кубаттуулугу төмөн.
  • Башка электрондук түзүлүштөрдүн кийлигишүүсү.
  • Батареяларды алмаштырыңыз.
  • Ensure no strong light sources or other infrared devices are interfering.

7. Техникалык шарттар

Модель номериWW918
БрендРЕТРОСУН
Байланыш технологиясыИнфракызыл
Power Source2 x AAA 1.5V батарейкалар (киргизилген эмес)
Операциялык аралык8 метрге чейин (26 фут)
МатериалABS Environmental Protection Material, Soft Silicon Buttons
Өлчөмдөрү (L x W x Y)Болжол менен 4.61 x 1.50 x 0.59 дюйм
Элемент СалмагыБолжол менен 0.704 унция
Алыстан башкаруу пультун өлчөмдөрүн көрсөткөн диаграмма

Сүрөт 7.1: Dimensional drawing of the remote control, indicating its length (4.61 inches), width (1.50 inches), and thickness (0.59 inches).

8. Коопсуздук боюнча маанилүү маалымат

Documents - RETROSUN – WW918

тиешелүү документтер жок