TotalHome TTH2CT

TotalHome Room STAT зымдуу санарип термостаты үчүн колдонуучу колдонмосу

1. Киришүү

Thank you for choosing the TotalHome Room STAT Wired Digital Thermostat. This manual provides comprehensive instructions for the installation, operation, and maintenance of your new thermostat. Please read this manual carefully before installation and use to ensure proper function and to maximize the benefits of your device. Keep this manual for future reference.

2. Коопсуздук маалыматы

Электр тогуна урунуунун, өрттүн же продуктунун бузулушунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

3. Продукт бүтүп калдыview

The TotalHome Room STAT Wired Digital Thermostat (Model TTH2CT) is designed to provide precise control over your heating and hot water systems. It features a clear digital display and intuitive buttons for easy programming and adjustment.

TotalHome Room STAT Wired Digital Thermostat front view with display and control buttons.

Сүрөт 1: Алдыңкы View of TotalHome Room STAT Wired Digital Thermostat
This image displays the front of the TotalHome Room STAT Wired Digital Thermostat. It features a central digital screen showing the current date (06-07-2024) and time (9:49 AM). To the left and right of the screen are control sections for "HOT WATER" and "HEATING" respectively. Each section includes two circular buttons labeled "EXTRA HOUR" and "OVER RIDE", and a "MODE" button below the screen. The display also shows "CONT", "ONCE", "AUTO", and "OFF" options for both hot water and heating, with "AUTO" currently selected for both. The brand "TotalHome" is visible at the bottom center.

Негизги өзгөчөлүктөрү:

4. Орнотуу жана орнотуу

4.1. Орнотуу жери

Install the thermostat on an interior wall, approximately 1.5 meters (5 feet) from the floor. Avoid locations near heat sources (e.g., direct sunlight, lamps, appliances), drafts (e.g., windows, doors), or areas with poor air circulation.

4.2. Электр зымдары

Маанилүү: Disconnect power to the heating system at the main circuit breaker before beginning any wiring. Incorrect wiring can cause damage to the thermostat or heating system, and may pose an electrical hazard.

This is a wired thermostat. Refer to the wiring diagram provided with the product packaging for specific connection points. Typically, connections involve live, neutral, and switched live terminals for both heating and hot water circuits. If you are unsure about wiring, consult a qualified electrician or heating engineer.

4.3. Баштапкы кубаттуулук

Once wired and mounted, restore power to the heating system. The thermostat display should illuminate. The initial setup may require setting the current time and date.

5. Иштөө нускамалары

The thermostat provides independent control for Hot Water and Heating. The controls are mirrored on the left (Hot Water) and right (Heating) sides of the device.

5.1. Убакыт жана дата орнотуу

To set the current time and date, press and hold the РЕЖИМ button for approximately 3 seconds on either the Hot Water or Heating side. The display will enter time/date setting mode. Use the КОШУМЧА СААТ жана OVER RIDE buttons to adjust the values (e.g., hours, minutes, day, month, year). Press РЕЖИМ again to move to the next setting or to save and exit.

5.2. Hot Water Control

колдонуу РЕЖИМ button on the left side (under "HOT WATER") to cycle through the following operating modes:

5.3. Heating Control

колдонуу РЕЖИМ button on the right side (under "HEATING") to cycle through the following operating modes:

5.4. Extra Hour Function

басыңыз КОШУМЧА СААТ button (top circular button) on either the Hot Water or Heating side to temporarily extend the current ON period by one hour. This function is useful for short-term adjustments without altering the main program.

5.5. Override Function

басыңыз OVER RIDE button (bottom circular button) on either the Hot Water or Heating side to temporarily switch the system ON or OFF, overriding the current program until the next programmed event. This is useful for immediate changes to the schedule.

6. Техникалык тейлөө

The TotalHome Room STAT Wired Digital Thermostat requires minimal maintenance.

7. Кыйынчылыктарды

Эгер термостатыңызда көйгөйлөр пайда болсо, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

КөйгөйМүмкүн себепЧечим
Дисплей бош же иштебейт.Электр энергиясы жок.Check the main circuit breaker for your heating system. Ensure all wiring connections are secure.
Heating/Hot Water not turning on/off as programmed.Incorrect mode selected (e.g., OFF instead of AUTO).
Program schedule not set correctly.
Verify the thermostat is in АВТО mode for the respective system. Review and adjust your program schedule.
Heating/Hot Water is continuously ON.УЛАНДЫ режим тандалды.
OVER RIDE or КОШУМЧА СААТ жандырылды.
Режимди төмөнкүгө которуңуз АВТО. Cancel any active OVER RIDE or КОШУМЧА СААТ функциялары.

If the problem persists after attempting these solutions, contact TotalHome customer support or a qualified technician.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official TotalHome webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

If you require assistance with installation or operation, it is recommended to contact a qualified professional or TotalHome customer service.

Тектеш документтер - TTH2CT

Preview TotalHome TTHWP зымдуу программалануучу термостатты орнотуу боюнча колдонмо
TotalHome TTHWP зымдуу программалануучу термостатын орнотуу боюнча колдонмо, анда коопсуздук, орнотуу кадамдары, ар кандай казан түрлөрү үчүн зым схемалары жана параметрлерди тууралоо камтылган. Resideo Technologies, Inc. тарабынан өндүрүлгөн.
Preview TotalHome программалануучу термостаты үчүн колдонуучунун колдонмосу TTHWP TTHWFP
TotalHome TTHWP жана TTHWFP программалануучу термостаттары үчүн колдонуучунун колдонмосу, экранды жаап туратview, график боюнча программалоо, түзмөктүн режимдери, дата/убакыт жөндөөлөрү, температураны өзгөртүү жана мүчүлүштүктөрдү оңдоо.
Preview Resideo Room Thermostats, Timers, and Valves - Intelligent Heating Controls
Explore Resideo's range of programmable, digital, and mechanical room thermostats, 7-day timers, and motorised valves designed for efficient and intelligent heating control. Includes product codes and features.