Graco Benton 4-бирде кабриолет мини-кроваткасы, матрац менен колдонуу боюнча нускама

Маанилүү коопсуздук маалыматы

Read all instructions before assembly and use of the crib. Keep this manual for future reference. Failure to follow these warnings and instructions could result in serious injury or death.

Коопсуздук сертификаттары

• GREENGUARD алтын сертификаты: This product has been screened for over 10,000 chemicals and VOCs, contributing to cleaner indoor air.
• Baby Safety Alliance Verified: Both the mini crib and the included mattress meet or exceed all applicable federal safety standards.

Жалпы коопсуздук эскертүүлөрү

• Do not use this crib if any parts are missing, damaged, or broken. Contact Graco for replacement parts.
• Бөлүктөрдү алмаштырбаңыз.
• Ensure all assembly fasteners are tightened securely.
• Баланын бешигин терезенин жанына койбоңуз, анткени ал жерде жалюзи же пардалардын жиптери баланы муунтуп коюшу мүмкүн.
• Баланын мойнуна жип же шнур байланган буюмдарды, мисалы, капюшон жиптерин же соска жиптерин салбаңыз.
• Do not suspend strings or cords over a crib or attach them to toys.
• The mattress supplied with this crib is specifically designed for it. Do not use any other mattress.
• When a child is able to pull to a standing position, set the mattress to the lowest position.
• When a child is able to climb out, the crib should no longer be used.

Пакеттин мазмуну

Чогултууну баштоодон мурун, бардык компоненттердин бар экендигин текшериңиз.

• Crib Frame Components (Headboard, Footboard, Side Rails)
• Mattress Support Base
• 2.75-inch Mini Crib Mattress
• Hardware Pack (Screws, Barrel Nuts, Allen Wrench)
• Монтаждоо көрсөтмөлөрү

Image: The Graco Benton 4-in-1 Convertible Mini Crib in Driftwood finish, shown alongside the included 2.75-inch bonus crib mattress.

Орнотуу жана чогултуу

Assembly requires two adults. An Allen wrench is included.

Step 1: Attach Side Rails to Headboard

Align the pre-drilled holes on the side rails with the corresponding holes on the headboard. Insert the provided screws and tighten with the Allen wrench. Do not overtighten.

Image: An assembled Graco Benton Mini Crib, showcasing the driftwood finish and sturdy construction.

2-кадам: Footboard тиркөө

Repeat the process from Step 1 to attach the footboard to the remaining ends of the side rails, completing the crib frame.

Сүрөт: фронт view of the Graco Benton Mini Crib, highlighting the curved headboard design.

Step 3: Install Mattress Support Base

The mattress support base has four adjustable height options. For newborns, use the highest setting for easier access. As your child grows and can pull to a standing position, lower the mattress support to the lowest setting. Secure the mattress support base to the crib frame using the designated hardware.

Сүрөт: жакын план view of the interior of the Graco Benton Mini Crib, showing the mattress support base.

Step 4: Place Mattress

Place the included 2.75-inch mini crib mattress onto the secured mattress support base. Ensure it fits snugly without gaps.

Operating Instructions: Conversions

The Graco Benton 4-in-1 Mini Crib converts into a daybed and a twin-size bed.

Converting to Daybed

1. Remove one of the side rails from the assembled mini crib.
2. Ensure the mattress support is at the lowest position for safety.
3. The remaining three sides form the daybed structure.

Image: The Graco Benton Mini Crib configured as a daybed, complete with bedding and decorative items.

Converting to Twin Bed

Эскертүү: Conversion to a twin bed requires the Graco Crib Conversion Kit (sold separately).

1. Disassemble the mini crib, retaining the headboard and footboard.
2. Follow the instructions provided with the Graco Crib Conversion Kit to attach the headboard and footboard to a standard twin bed frame.

Image: The headboard of the Graco Benton Mini Crib used as the headboard for a twin-size bed.

Image: The headboard and footboard of the Graco Benton Mini Crib used as part of a twin-size bed frame.

Техникалык тейлөө жана кам көрүү

Тазалоо

Wipe the crib frame with a damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the wood finish.

The outer cover of the mini crib mattress is water-resistant and can be wiped clean. Refer to the mattress care label for specific cleaning instructions.

Текшерүү

Regularly check all screws and fasteners to ensure they are tight. Periodically inspect the crib for any signs of wear, damage, or loose parts.

Проблемаларды чечүү

Crib feels wobbly after assembly

Ensure all screws and fasteners are fully tightened. Do not overtighten, but ensure a snug fit. Disassemble and reassemble if necessary, carefully following each step.

Mattress does not fit snugly

The included mattress is designed to fit this mini crib. Ensure the mattress support base is correctly installed and that no foreign objects are preventing the mattress from sitting flush. If using a different mattress, ensure it meets the dimensions specified for mini cribs and fits without gaps.

Difficulty adjusting mattress height

Ensure the mattress support base is properly aligned with the adjustment points on the crib frame. You may need to slightly lift one side of the mattress support at a time to adjust.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

The Graco Benton Mini Crib is backed by a 1-year limited warranty. Please retain your proof of purchase for warranty claims.

Кардарларды колдоо

For assistance with assembly, missing parts, or warranty inquiries, please contact Graco customer support. Refer to the product packaging or the official Graco webучурдагы байланыш маалыматы үчүн сайт.

You can also visit the official Graco store for more information: Graco Store.

Расмий продукт Video

Бул видеону аягына чейин көрүңүзview of Graco's commitment to parenting and product development.

Video: "Graco Baby Video" - This video highlights the brand's dedication to supporting parents through their product designs and safety standards.