Xigmatek Elysium II Full Tower PC Case User Manual

1. Киришүү

Thank you for choosing the Xigmatek Elysium II Full Tower PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and optimal performance.

Figure 1.1: Xigmatek Elysium II Full Tower PC Case with illuminated ARGB fans.

Негизги өзгөчөлүктөрү:

• Four-sided tempered glass panels for a premium aesthetic and component visibility.
• Supports motherboards up to SSI EEB/CEB and E-ATX for high-end workstation and gaming builds.
• Extensive cooling support with pre-installed 16 x 140mm ARGB square ring fans.
• Accommodates large liquid cooling radiators: Top (up to 420mm), Front (up to 480mm), Rear (up to 280mm).
• CPU cooler height support up to 220mm.
• Graphics card length support up to 460mm.
• Convenient top I/O panel with USB Type-C x 1, USB 3.0 x 2, USB 2.0 x 1, and HD Audio Jack.

2. Техникалык шарттар

3. Орнотуу жана орнотуу

Before starting, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation steps.

3.1 Пакеттин мазмуну

• Xigmatek Elysium II Full Tower PC Case
• 16 x 140mm ARGB Square Ring Fans (pre-installed)
• 2 x Galaxy II Fan Control Boxes
• Remote Control Sets
• Аксессуарлар кутучасы (буроолор, кабелдик байланыштар, бекиткичтер ж.б.)
• Колдонуучунун Колдонмосу (бул документ)

3.2 Компонентти идентификациялоо

Figure 3.1: Internal layout of the Elysium II case, highlighting fan mounts and component areas.

Сүрөт 3.2: Арткы ички view, showing cable management space and drive bay locations.

3.3 Орнотуу кадамдары

1. Ишти даярдоо: Carefully remove the tempered glass panels. Lay the case on its side on a stable, flat surface.
2. Motherboard орнотуу: Install the necessary standoffs for your motherboard form factor. Gently place your motherboard onto the standoffs and secure it with screws.
3. Кубат менен камсыздоо блогун (PSU) орнотуу: Mount your PSU into its designated compartment (top mount). Secure it with screws from the rear of the case. Route necessary cables through the cable management cutouts.
4. Сактагыч түзмөктөрдү орнотуу: Locate the drive bays for 2.5" SSDs and 3.5" HDDs. Secure your storage devices using the provided screws or tool-less mechanisms.
5. Графикалык картаны (GPU) жана кеңейтүү карталарын орнотуу: Remove the necessary PCIe slot covers. Insert your graphics card and any other expansion cards into their respective slots on the motherboard and secure them.
6. Кабелдерди туташтыруу: Connect all power cables from the PSU to your motherboard, GPU, and storage devices. Connect the front panel I/O cables (USB, audio, power/reset buttons, LEDs) to the appropriate headers on your motherboard. Ensure all pre-installed fan cables and ARGB cables are connected to the fan control boxes and then to the motherboard or PSU as required.
7. Кабелдик башкаруу: Utilize the cable routing channels and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
8. Reinstall Panels: Once all components are installed and cables are managed, carefully reattach the tempered glass panels.

4. Иштөө нускамалары

4.1 Күйгүзүү

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button located on the top I/O panel of the case to start your system.

4.2 ARGB Fan Control

The Elysium II comes with pre-installed ARGB fans and two Galaxy II fan control boxes. You can control the lighting effects and fan speeds using the included remote control. Refer to the Galaxy II fan control box manual for detailed instructions on changing modes, colors, and brightness. The reset button on the top I/O panel may also cycle through ARGB modes if connected to the controller's reset header.

4.3 Алдыңкы киргизүү/чыгаруу порттору

Жогорку киргизүү/чыгаруу панели төмөнкүлөргө ыңгайлуу мүмкүнчүлүк берет:

• USB Type-C port for modern devices.
• Жогорку ылдамдыктагы маалыматтарды берүү үчүн USB 3.0 порттору.
• USB 2.0 port for general peripherals.
• HD Audio Jack for headphones and microphones.
• Reset button for system restart.

5. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your PC components.

• Чаң чыпкалары: The Elysium II case is equipped with removable dust filters. Periodically remove and clean these filters (e.g., with compressed air or by washing with water and drying thoroughly) to prevent dust buildup inside the case, which can impede airflow and cooling.
• Тышкы тазалоо: жумшак колдонуу, damp cloth to wipe down the exterior surfaces, including the tempered glass panels. Avoid abrasive cleaners or solvents that could damage the finish.
• Ички тазалоо: With the system powered off and unplugged, use compressed air to remove dust from internal components, especially fan blades and heatsinks.

6. Кыйынчылыктарды

If you encounter issues with your PC case, consider the following common problems and solutions:

• Кубат жок:
  • PSU розеткага туура туташтырылганын жана PSUдогу кубат которгучу "ON" абалында экенин текшериңиз.
  • Verify that the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard.
  • Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Күйөрмандар айланбай жатат / RGB күйбөйт:
  • Confirm that all fans are properly connected to the fan control boxes.
  • Ensure the fan control boxes are receiving power from the PSU (usually via SATA power connector).
  • Check that the ARGB cables from the control boxes are connected to the motherboard's ARGB header (if applicable) or that the remote control is functioning and has fresh batteries.
• Алдыңкы USB порттору иштебейт:
  • Verify that the USB 3.0, USB 2.0, and USB Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.
• No Audio from Front Jack:
  • Ensure the HD Audio cable from the front panel is correctly connected to the audio header on your motherboard.

For persistent issues, consult the Xigmatek support webсайтка же кардарларды тейлөөгө кайрылыңыз.

7. Кепилдик жана колдоо

Xigmatek products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Xigmatek webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.