1. Продукт бүтүп калдыview
The Hormann FIT 2-1 BS Push Button is a 2-button wireless transmitter designed for controlling automated systems. It operates at a frequency of 868.35 MHz and utilizes BiSecur technology for secure communication. This device allows for the control of two different motorizations or two distinct functions on the same automated system. It is intended exclusively for indoor use in a dry environment.
The push button is easy to install and is powered by two 1.5V LR03/AAA batteries, which are included. The package also contains an installation manual and mounting accessories to facilitate setup.
Сүрөт 1: Алдыңкы view of the Hormann FIT 2-1 BS Wireless Push Button, showing the two control buttons.
2. Техникалык шарттар
| Бренд | Хорман |
| Үлгү шилтемеси | 4511695 |
| Өлчөмдөрү (L x W x Y) | 80 x 80 x 36 мм |
| Жыштык | 868.35 МГц |
| баскычтардын саны | 2 |
| Каналдардын саны | 2 |
| Электр камсыздоо | 2 x 1.5V LR03/AAA batteries (included) |
| Салмагы | 0.2 kg (90 grams according to specifications) |
| Экологиялык рейтинг | IP 20 (Indoor use only) |
3. Шайкештик
The Hormann FIT 2-1 BS is compatible with Hormann motorizations that utilize BiSecur technology. It is also retro-compatible with older 868 MHz fixed code motorizations.
Compatible motorizations include:
- SupraMatic
- ProMatic
- RotaMatic
- LineaMatic
- VersaMatic
It can also be used with key switches such as:
- ESA 40
- ESU 40
- кездешкени 40
- STUP 40
- кездешкени 50
- STUP 50
Important: Verify compatibility with your existing motorizations before installation.
4. Орнотуу жана орнотуу
The Hormann FIT 2-1 BS push button is designed for easy installation. It comes with all necessary mounting accessories.
4.1. Таңгактан чыгаруу жана алгачкы текшерүү
- Carefully unpack the push button and all accessories.
- Таңгактоодо көрсөтүлгөн бардык компоненттердин бар экенине ынаныңыз.
- Аппаратты кандайдыр бир көрүнгөн зыяндын бар-жоктугун текшериңиз.
4.2. Батареяны орнотуу
The device is powered by two 1.5V LR03/AAA batteries. These are typically pre-installed or included separately.
- Locate the battery compartment, usually on the back or side of the unit.
- Бөлүмдүн капкагын ачыңыз.
- Insert the two LR03/AAA batteries, ensuring correct polarity (+/-).
- Батарея уясынын капкагын бекем жабыңыз.
2-сүрөт: Каптал view of the push button, indicating the location of the battery compartment.
4.3. Баскычты орнотуу
The push button must be installed in a dry, indoor environment.
- Choose a suitable indoor location for mounting, ensuring it is dry and easily accessible.
- Use the provided mounting accessories (screws, wall plugs) to securely attach the push button to the wall.
- Ensure the device is firmly fixed and does not wobble.
4.4. Programming the Buttons
The programming procedure links the push button to your Hormann motorization(s).
- Refer to the detailed programming instructions provided in the included manual.
- Typically, this involves activating a programming mode on your motorization unit and then pressing the desired button on the FIT 2-1 BS push button.
- Repeat the process for the second button if you wish to control another motorization or function.
- Test the functionality after programming to ensure successful pairing.
5. Иштөө нускамалары
Once programmed, operating the Hormann FIT 2-1 BS is straightforward.
- басыңыз upper button to activate the first programmed function or motorization (e.g., open/close garage door).
- басыңыз lower button to activate the second programmed function or motorization (e.g., partial opening, light control).
- The device transmits a secure BiSecur signal to your receiver.
3-сүрөт: Бурчтуу view of the push button, highlighting the two distinct control surfaces.
6. Техникалык тейлөө
The Hormann FIT 2-1 BS requires minimal maintenance to ensure reliable operation.
6.1. Тазалоо
- Wipe the surface of the push button with a soft, dry cloth.
- Абразивдүү тазалоочу каражаттарды, эриткичтерди же катуу химиялык заттарды колдонбоңуз, анткени алар тырмактын терисине зыян келтириши мүмкүн.asing.
6.2. Батареяны алмаштыруу
When the batteries are low, the device's indicator light (if present) may flash or its range may decrease. Replace batteries as follows:
- Батарея бөлүмүн 4.2-бөлүмдө сүрөттөлгөндөй ачыңыз.
- Remove the old 1.5V LR03/AAA batteries.
- Insert new 1.5V LR03/AAA batteries, observing correct polarity.
- Эски батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.
7. Кыйынчылыктарды
If the push button is not functioning as expected, consider the following:
- No response from motorization:
- Батареялар туура салынганын жана түгөнбөгөнүн текшериңиз. Керек болсо алмаштырыңыз.
- Ensure the push button is within the operating range of the motorization's receiver.
- Verify that the push button is correctly programmed to the motorization. Refer to the programming instructions.
- Check for any obstructions between the push button and the receiver that might block the signal.
- Үзгүлтүксүз иштөө:
- Бул батареянын кубаты аз экенин билдириши мүмкүн. Батареяларды алмаштырыңыз.
- Ensure there is no significant radio interference in the area.
- Push button not mounting securely:
- Ensure you are using appropriate screws and wall plugs for your wall type.
- Avoid over-tightening screws, which can damage the casing.
If problems persist after following these steps, consult the full product manual or contact Hormann customer support.
8. Коопсуздук боюнча маалымат жана эскертүүлөр
- The push button must be installed exclusively in a dry, indoor environment. Do not expose it to moisture, rain, or extreme temperatures.
- Аппаратты ачпаңыз casing beyond the battery compartment, except for authorized service personnel.
- Батареяларды балдар жетпеген жерде сактаңыз. Эгер жутуп алса, дароо медициналык жардамга кайрылыңыз.
- Ensure proper disposal of used batteries according to local environmental regulations.
- Бул аппарат оюнчук эмес. Балдардан алыс болуңуз.
- Always ensure the area around the motorization is clear before operating to prevent injury or damage.
4-сүрөт: Каптал view of the push button, illustrating its compact design and potential security indicators.
9. Кепилдик маалыматы
Specific warranty details for the Hormann FIT 2-1 BS Wireless Push Button are not provided in the product description. Please refer to the warranty card included with your purchase or contact your retailer for information regarding warranty terms and conditions.
10. Колдоо жана байланыш
Contact information for direct customer support is not provided in the product description. For technical assistance, troubleshooting, or further inquiries, please refer to the official Hormann webсайтына же товарды сатып алган сатуучуга кайрылыңыз.
