ILM E3-12LS Smart Adult Bike Helmet User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your ILM E3-12LS Smart Adult Bike Helmet. Designed for road cycling, this helmet integrates advanced safety features, including automatic G-sensor turn signals, brake warning LED lights, and Bluetooth 5.0 connectivity. Please read this manual thoroughly before using your helmet to ensure optimal performance and safety.

Коопсуздук маалыматы

The ILM E3-12LS helmet is certified to NTA-8776, CE, and CPSC standards, offering enhanced protection for e-bike speeds up to 28 mph. It is crucial to always wear your helmet correctly and ensure a snug fit. Regularly inspect your helmet for any signs of damage. A damaged helmet must be replaced immediately, as its protective capabilities may be compromised.

Маанилүү: The automatic turn signals and light control functions are designed for enhanced visibility but do not replace standard hand signals or adherence to traffic laws. Always remain aware of your surroundings.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x ILM E3-12LS Smart Helmet
• 1 x Black Visor
• 1 x Remote Controller
• 1 x USB Type-C заряддоо кабели
• 1 x User Manual
• 2 x Windproof Plugs
• 1 x Bluetooth Ear Pad (requires user installation)

Image: All components included in the ILM E3-12LS Smart Helmet package.

Орнотуу колдонмосу

1. Helmet Fitting

Proper helmet fit is essential for safety. Refer to the size chart below to ensure your helmet fits snugly and comfortably. The helmet should sit level on your head, covering your forehead, and the chin strap should be securely fastened without being too tight.

Note: Helmet sizes may run small. If you are between sizes, it is suggested to size up.

Image: Visual guide for helmet sizing and proper fit.

2. Installing Bluetooth Ear Pads

The Bluetooth ear pads are included separately and require user installation. Carefully align the ear pads with the designated slots inside the helmet and press firmly until they are securely attached. Ensure the speaker components are positioned comfortably over your ears.

Image: Step-by-step visual guide for installing the Bluetooth ear pads.

3. Туулганы заряддоо

Before first use, fully charge the helmet's internal battery using the provided USB Type-C charging cable. Locate the charging port, typically on the side or rear of the helmet. Connect the cable to the helmet and a suitable USB power source. An indicator light will show charging status. Ensure the charging cable is fully seated to prevent connection issues.

Image: The USB Type-C charging port on the helmet.

4. Көз айнекти бекитүү

The helmet comes with a detachable black visor designed to protect against sunlight, dust, and flying debris. Align the visor's attachment points with the corresponding slots on the helmet and firmly snap it into place. Ensure it is securely fastened before riding.

Image: The detachable black visor attached to the helmet.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү

To power on the helmet, press and hold the main power button (usually located on the rear or side) until the LED lights illuminate. To power off, press and hold the same button until the lights turn off.

2. Bluetooth 5.0 байланышы

The helmet features Bluetooth 5.0 for connecting to your mobile phone or other Bluetooth-enabled devices. This allows for music playback, answering calls, and voice assistant functionality.

1. Жупташтыруу режими: With the helmet powered on, activate Bluetooth on your mobile device. The helmet should appear as "E3-12SLBT" in your device's Bluetooth settings.
2. Туташуу: Select "E3-12SLBT" to pair. A voice prompt will confirm successful connection.
3. Башкаруу каражаттары: Use the integrated controls on the helmet's ear pads or the remote controller to manage music playback, answer/end calls, and activate your device's voice assistant.

Image: Bluetooth pairing process with a mobile device.

3. Light Control Function

The helmet's front and rear lights automatically adjust based on ambient light intensity. They will illuminate automatically in low-light conditions or at night after being switched on. This function does not operate during daytime.

• Автоматтык режим: When the rear blue light is steady, the helmet is in light-on mode.
• Өзгөртүү режимдери: In light-on mode, short press the power button once to cycle through different light modes (e.g., Front Light: steady, Rear Light: flash twice; Front Light: steady, Rear Light: steady; Front Light: steady, Rear Light: fast flash).

Image: Helmet's automatic light control function in action.

Image: Explanation of the three light modes.

4. Automatic Brake Lights & Turn Signals

The helmet features an automatic G-sensor for enhanced signaling:

• Тормоз эскертүүсү: During emergency braking, the rear lights will automatically increase to 100% brightness to alert vehicles behind you.
• Бурулуш сигналдары: Tilting your head more than 15 degrees to the left activates the left turn signal for 10 seconds. Tilting your head more than 15 degrees to the right activates the right turn signal for 10 seconds. This function does not operate during daytime.

Image: Rear LED lights indicating brake warning.

Image: Automatic turn signal activation based on head tilt.

5. Алыстан башкаргыч

The included remote controller can be mounted on your bike's handlebars for convenient control of the helmet's functions, such as turn signals and light modes, without needing to remove your hands from the handlebars.

Image: Remote controller for helmet functions.

Техникалык тейлөө

1. Cleaning the Helmet

Clean the helmet's exterior with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive materials that could damage the finish or internal components. The inner padding can be removed and hand-washed with mild detergent, then air-dried completely before reinstallation.

Image: Removable internal padding for cleaning.

2. Батареяга кам көрүү

To prolong battery life, avoid fully discharging the helmet's battery frequently. Charge the helmet regularly, even if not in use for extended periods (e.g., once every 3 months). Use only the provided charging cable.

3. Сактоо

Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures. Do not place heavy objects on the helmet, as this can deform its structure and compromise safety.

Проблемаларды чечүү

1. Заряддоо маселелери

If the helmet is not charging, ensure the USB Type-C cable is fully and securely inserted into the charging port. Some users have reported that the charging port cover might obstruct proper connection, or the cable may not seat correctly. Verify that the charging cable and power source are functional by testing them with another device.

2. Bluetooth Connection Problems

If the helmet fails to pair or maintain a Bluetooth connection, try the following:

• Шлем толук заряддалганын текшериңиз.
• Turn off and on the helmet's Bluetooth.
• Forget the device ("E3-12SLBT") from your phone's Bluetooth settings and attempt to re-pair.
• Ensure your phone is within the 10-meter (33 ft) Bluetooth range.

3. Lights Not Functioning

If the lights are not working, check the battery level. Remember that automatic light functions and turn signals may not be visible or active in bright daylight conditions. Ensure the helmet is powered on and in an appropriate light mode.

Техникалык шарттар

• Бренд: ILM
• Модель аты: E3-12LS
• Жаш аралыгы: бойго жеткен
• Сырткы материал: Поликарбонат (PC)
• Ички материал: Кеңейтилген полистирол (EPS)
• Өзгөчөлүктөр: Bluetooth, Lightweight, Visor, Automatic G-Sensor Turn Signal, Brake Warning LED Light Control
• Сертификаттар: NTA-8776, CE, CPSC
• Буюм пакетинин өлчөмдөрү: 11.75 x 9.6 x 7.5 дюйм
• Пакет Салмагы: 1.09 килограмм
• Спорт түрү: Велосипед тебүү

Видео: Расмий продукт көргөзмөсүasing the ILM Bluetooth Smart Bike LED Helmet features and design.

Video: Official test video demonstrating the ILM E3-12LS helmet's compliance with NTA8776 safety standards through impact testing.

Кепилдик маалымат

ILM guarantees that the helmets are free of charge for failures caused by defects in materials and workmanship under normal use. For specific warranty claims or further details, please refer to the official ILM webсайтка же кардарларды колдоо менен байланышыңыз.

Кардарларды колдоо

For any questions, technical assistance, or support regarding your ILM E3-12LS Smart Adult Bike Helmet, please visit the official ILM webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматын адатта продукт таңгагынан же бренддин расмий онлайн катышуусунан тапса болот.

ILM Store: Visit the ILM Store on Amazon