1. Продукт бүтүп калдыview
The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.
Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.
1.1 Кутуда эмне бар
Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.
- 1 x VTOMAN V3 Pro Car Jump Starter
- 1 x Smart Jumper кабелдери
- 1 x Type-C USB заряддоо кабели
- 1 x Ташуу сумкасы
- 1 x User Manual
1.2 Продукт диаграммасы
Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.
- Кубат которгучу: Activates and deactivates the unit.
- Electricity Indicator: Учурдагы батареянын заряд деңгээлин көрсөтөт.
- 12V Jumper Cable Interface: Port for connecting the smart jumper cables.
- LED фонарик: Көптөгөн режимдер менен жарыктандырууну камсыз кылат.
- 5V/2A Type-C Input Port: Стартерди кубаттоо үчүн.
- 5V/2.1A USB Output Port: Тышкы түзмөктөрдү кубаттоо үчүн.
- Интеграцияланган компас: For navigation assistance.
2. Коопсуздук маалыматы
Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
2.1 Жалпы коопсуздук чаралары
- Продукцияны жамгыр же нымдуу шарттарга дуушар кылбаңыз.
- Do not operate the product if it has been damaged.
- Балдар жетпеген жерде сактаңыз.
- Колдонуу жана кубаттоо учурунда туура желдетүүнү камсыз кылыңыз.
- Кошумча туташууну кыска туташтырбаңызamps.
- Always connect the positive (+) clamp to the positive (+) terminal and the negative (-) clamp терс (-) терминалга.
- Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.
2.2 Intelligent Safety Protections
The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:
Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.
- Anti-Spark Protection: Prevents sparks during connection.
- Reverse Charging Protection: Protects against current flowing back into the jump starter.
- Ашыкча ток коргоо: Ашыкча ток агымынан коргойт.
- Overcharging Protection: Батареянын ашыкча заряддалышынан улам бузулуусунун алдын алат.
- Полярдуулукту кайтаруу: Alerts and protects against incorrect clamp байланыштар.
- Жогорку температура коргоо: Ички температура коопсуз чектен ашып кетсе, өчөт.
- Төмөн температура коргоо: Суук шарттарда коопсуз иштөөнү камсыз кылат.
- Кыска туташуулардан коргоо: Кыска туташуулардан келип чыккан зыяндын алдын алат.
- Overvoltage Коргоо: Ашыкча көлөмдөн коргойтtage.
- Ашыкча жүктөн коргоо: Prevents damage from drawing too much power.
If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.
3. Орнотуу жана заряддоо
3.1 Алгачкы заряддоо
Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).
Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.
- Connect the Type-C cable to the input port on the jump starter.
- Кабелдин экинчи учун USB кубат булагына туташтырыңыз.
- The electricity indicator lights will illuminate to show the charging progress.
- Толук кубаттоо болжол менен 2.6 саатты талап кылат.
4. Иштөө нускамалары
4.1 Jump Starting a Vehicle (Standard Mode)
The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.
Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.
- Секирүү стартер жетиштүү заряддалганын текшериңиз.
- Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
- туташтыруу кызыл (+) clamp унаага оң (+) батарея терминалы.
- туташтыруу кара (-) clamp унаага negative (-) battery terminal.
- Once connected, the smart cable indicator light should be катуу жашыл, indicating a correct connection and readiness to jump start. If it's red, check connections.
- Унааңызды баштаңыз.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.2 Jump Starting a Completely Dead Battery (Boost Mode)
If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.
Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.
- Follow steps 1-4 from Section 4.1.
- If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
- The indicator light should turn solid green.
- Start your vehicle within 30 seconds.
- Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.
4.3 Power Bank катары колдонуу
The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.
Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.
- Connect your device's USB charging cable to the USB output port on the jump starter.
- Секирип баштоочу түзмөгүңүздү автоматтык түрдө кубаттай баштайт.
4.4 LED авариялык жарыкты колдонуу
The integrated LED flashlight has three modes for various situations.
Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.
- Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
- Press the power button once to switch to Strobe mode.
- Press the power button again to switch to SOS mode.
- Press the power button once more to turn off the light.
4.5 Компас функциясы
The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.
5. Техникалык тейлөө жана сактоо
Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.
Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.
- Заряддоо: Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
- Тазалоо: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasives.
- Сактагыч: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
- Температура: Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).
6. Кыйынчылыктарды
If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Унаа башталбайт. | Low charge on jump starter, incorrect cable connection, vehicle battery completely dead. | Ensure jump starter is fully charged. Check cable connections (red to positive, black to negative). If battery is completely dead, use Boost Mode (Section 4.2). |
| Smart cable indicator is red. | Reverse polarity, short circuit, or other safety issue. | Дароо clamps. Recheck connections for correct polarity. Ensure clamps are not touching each other or other metal parts. |
| Стартер заряддалбай жатат. | Faulty Type-C cable or USB adapter, unit malfunction. | Try a different Type-C cable and USB wall adapter. Ensure connections are secure. If issue persists, contact customer support. |
| LED жарыгы иштебейт. | Unit off, low battery. | Ensure the unit is powered on. Check battery level and recharge if necessary. |
7. Техникалык шарттар
Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | V3 Pro |
| Жогорку ток | 2000 Amps |
| Мотор шайкештиги | Up to 6L Gasoline / 4L Diesel Engines |
| Батарея түрү | Lithium Polymer (2 batteries included) |
| Киргизүү (Type-C) | 5V/2A |
| Чыгуу (USB) | 5V/2.1A |
| Заряддоо убактысы | Approx. 2.6 hours (0-100%) |
| Күтүү убактысы | 24 айга чейин |
| Иштөө температурасы | -4°F – 140°F (-20°C – 60°C) |
| Продукциянын өлчөмдөрү | 5.95"D x 3.15"W x 1.15"H |
| Элемент Салмагы | 0.61 фунт (болжол менен 9.8 унция) |
8. Кепилдик жана колдоо
VTOMAN provides comprehensive support for its products.
- Кепилдик: Сатып алган күндөн тартып 18 айлык кепилдик.
- Техникалык колдоо: Өмүр бою техникалык колдоо бар.
- Байланыш: For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN webбайланыш маалыматы үчүн сайт.
