NERF Loadout Galactic Commander Blaster G15804S0 Instruction Manual

1. Киришүү

This manual provides essential instructions for the safe and effective operation, assembly, and maintenance of your NERF Loadout Galactic Commander Blaster. Designed for customizable play, this blaster features multiple firing modes and interchangeable accessories. Please read all instructions carefully before use.

Image 1.1: The NERF Loadout Galactic Commander Blaster as packaged, showcasing the blaster and included accessories.

2. Коопсуздук маалыматы

WARNING: For ages 8 and above. To avoid eye injury:

• Көздү же бетти максат кылбаңыз.
• The use of eyewear is recommended for players and individuals within range.
• Use only official Nerf darts. Other darts may not meet safety standards.
• Дарттарды же жардыргычты өзгөртпөңүз.

3. Кутуда эмне бар

Your NERF Loadout Galactic Commander Blaster package includes the following components:

• 1x Galactic Commander Blaster
• 1x Sight attachment
• 1x Stock attachment
• 1x Barrel attachment
• 2x 18-dart magazines (clips)
• 48x Nerf N1 darts
• Instruction Sheet

Image 3.1: Contents of the NERF Loadout Galactic Commander Blaster package.

4. Орнотуу жана чогултуу

4.1 Батареяны орнотуу

The blaster requires 6 AA 1.5V alkaline batteries (not included). To install:

1. Locate the battery compartment on the side of the blaster.
2. Филлипс баштуу бурагычты колдонуп, батарея бөлүмүнүн капкагын бурап чыгарыңыз.
3. Туура полярдуулукту (+/-) камсыз кылуу менен 6 AA батарейкасын салыңыз.
4. Капкакты ордуна коюп, бурама менен бекитиңиз.

4.2 Аксессуарларды тиркөө

The NERF Loadout system allows for interchangeable accessories. To attach the sight, stock, and barrel:

1. Align the sight with the tactical rail on top of the blaster and slide it into place until it clicks.
2. Attach the stock by sliding it onto the rear attachment point of the blaster until it locks securely.
3. Connect the barrel attachment to the front of the blaster by aligning the grooves and twisting or pushing until secure.

Image 4.1: The NERF Loadout Galactic Commander Blaster fully assembled.

5. Иштөө нускамалары

5.1 Loading Darts

To load darts into the magazine:

1. Ensure you are using official Nerf N1 darts.
2. Push darts individually into the magazine until it is full (18 darts per magazine).
3. Insert the loaded magazine into the blaster's magazine well until it clicks into place.

5.2 Firing the Blaster

The Galactic Commander Blaster features three firing modes:

1. Автоматтык жарым: Select mode '1' on the fire selector switch. Pull the trigger to fire one dart per pull.
2. 3-Dart Burst: Select mode '2' on the fire selector switch. Pull the trigger to fire three darts in a quick burst.
3. Толугу менен автоматтык: Select mode '3' on the fire selector switch. Hold the trigger to continuously fire darts until the magazine is empty or the trigger is released.

To engage the motor, hold down the acceleration button (usually located below the trigger) before pulling the main trigger to fire.

6. Ыңгайлаштыруу

The NERF Loadout system allows for extensive customization. The included sight, stock, and barrel attachments are interchangeable with other NERF Loadout blasters (sold separately), offering over 1000 possible combinations to create your unique blaster configuration.

Сүрөт 6.1: Мисample of the Galactic Commander Blaster with different attachment configurations.

7. Техникалык тейлөө

To ensure optimal performance and longevity of your blaster:

• Keep the blaster clean and free from dirt or debris. Use a dry cloth to wipe surfaces.
• Store darts in a cool, dry place to maintain their shape and performance.
• Remove batteries if the blaster will not be used for an extended period to prevent leakage.
• Do not submerge the blaster in water or expose it to extreme temperatures.

8. Кыйынчылыктарды

If you encounter issues with your blaster, refer to the following common solutions:

• Blaster not firing: Check if batteries are correctly installed and charged. Ensure the magazine is fully inserted and loaded with darts.
• Darts not firing properly: Verify that only official Nerf N1 darts are used. Check for any jammed darts in the barrel or firing mechanism and carefully clear them.
• Мотор иштебей жатат: Ensure the acceleration button is held down completely before pulling the trigger. Check battery power.

Эгер көйгөйлөр чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Nerf webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.