Продукт бүттүview
This document provides detailed instructions for the installation, operation, and maintenance of your Alpine S2-A55V S-Series Class-D 5-Channel Amplifier, S2-S40C 4" Component Speaker Set, S2-S40 4" Coaxial Speaker Set, and S2-W10D4 10" Subwoofer bundle. This system is designed to enhance your vehicle's audio experience with high-resolution sound reproduction.
Сүрөт: бүттүview of the Alpine S2-A55V amplifier, S2-S40C component speakers, S2-S40 coaxial speakers, and S2-W10D4 subwoofer included in the bundle.
Компоненттин чоо-жайы
Alpine S2-A55V 5-Channel Ampөмүрлүү
The S2-A55V is a Hi-Res Audio Certified Class-D 5-channel amplifier, providing power for a full car audio system. It delivers 40W x 4 channels plus 200W x 1 channel at 4 ohms, or 60W x 4 channels plus 300W x 1 channel at 2 ohms. Features include selectable remote turn-on circuit and built-in crossovers for precise sound tuning.
Сүрөт: жогорудан төмөнгө view of the Alpine S2-A55V 5-Channel Ampкөтөргүч, көрсөтүүчүasing анын компакттуу дизайны.
Сүрөт: Арткы view of the Alpine S2-A55V amplifier, showing the power input terminals (BATT, REM, GND) and speaker output terminals (CH-1, CH-2, CH-3, CH-4, SUB).
Сүрөт: алдыңкы view of the Alpine S2-A55V amplifier's control panel, displaying RCA inputs, gain controls, filter adjustments (HP Filter, LP Filter), and bass EQ settings.
Alpine S2-S40C 4" Component Speaker Set
These 4-inch component speakers are Hi-Res Certified and feature HAMR surround technology for enhanced bass response. The set includes separate woofers and tweeters for optimal sound staging and clarity, with a peak power handling of 140W.
Image: The Alpine S2-S40C 4-inch component speaker set, showing the separate woofer and tweeter units.
Alpine S2-S40 4" Coaxial Speaker Set
The S2-S40 coaxial speakers offer an OEM fitment with integrated tweeters, providing clear and accurate audio performance. These 4-inch speakers are also Hi-Res Certified and utilize HAMR surround technology for powerful bass reproduction.
Image: A single Alpine S2-S40 4-inch coaxial speaker, showing the integrated tweeter within the woofer cone.
Alpine S2-W10D4 10" Subwoofer
This 10-inch subwoofer delivers deep, distortion-free bass with 600W RMS and 1800W peak power handling. It features a carbon fiber and polypropylene cone, a Dual Voice Coil (DVC) design, and a twist-lock grille mount system for durability and flexible installation.
Сүрөт: бурчтуу view of the Alpine S2-W10D4 10-inch subwoofer, highlighting its cone and terminal connections.
Сүрөт: Жогорку view of the Alpine S2-W10D4 10-inch subwoofer, showing the carbon fiber and polypropylene cone with the Alpine logo.
Сүрөт: Төмөнкү view of the Alpine S2-W10D4 10-inch subwoofer, revealing the magnet structure and ventilation.
Орнотуу жана орнотуу
Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified professional. Always disconnect the vehicle's negative battery terminal before beginning any electrical work.
Зымдарды орнотуу боюнча көрсөтмөлөр
- Кубат туташуу: туташтыруу amplifier's BATT terminal to the vehicle's positive battery terminal using an appropriate gauge power cable with an inline fuse (not included).
- Жерге туташуу: туташтыруу ampкөтөргүчтүн GND терминалын унаанын шассииндеги таза, боёлбогон металл бетине. Катуу, аз каршылыктуу байланышты камсыз кылыңыз.
- Алыстан күйгүзүү: туташтыруу amplifier's REM terminal to the remote output of your head unit. This signal turns the amplifier on and off with your vehicle's audio system.
- RCA киргизүү: Connect the RCA outputs from your head unit to the corresponding RCA inputs on the S2-A55V amplifier (CH-1/2, CH-3/4, SUB).
- Динамик зымдары:
- Connect the S2-S40C component speakers to channels 1 and 2 of the ampкөтөргүч. Туура полярдуулукту камсыз кылыңыз (+ менен + жана -дан -га чейин).
- Connect the S2-S40 coaxial speakers to channels 3 and 4 of the ampөмүрлүү.
- Connect the S2-W10D4 subwoofer to the SUB channel of the amplifier. For dual voice coil subwoofers, refer to the subwoofer's specific wiring configurations (series or parallel) to match the ampкөтөргүчтүн импеданс талаптары.
Монтаждоо маселелери
- монтаждоо amplifier in a location that allows for adequate ventilation and is protected from moisture and direct sunlight.
- Ensure speakers are securely mounted in their designated locations (e.g., door panels, dash) to prevent vibration and ensure optimal sound projection.
- The subwoofer should be installed in an appropriate enclosure (sealed or ported, depending on desired sound characteristics) within the vehicle's trunk or cargo area.
Иштөө нускамалары
Once installed, proper adjustment of the amplifier settings is essential for achieving the best sound quality from your Alpine system.
Amplifier Adjustments (S2-A55V)
- Көзөмөлдү алуу: Adjust the gain controls for each channel (CH-1/2, CH-3/4, SUB) to match the output voltage of your head unit. Start with the gain at minimum and slowly increase until distortion is audible, then back off slightly.
- HP Filter (High-Pass Filter): For the component and coaxial speakers (CH-1/2, CH-3/4), set the HP filter to prevent low frequencies from reaching them, improving clarity and preventing damage. A common starting point is 80-100 Hz.
- LP Filter (Low-Pass Filter): For the subwoofer channel (SUB), set the LP filter to allow only low frequencies to pass through. A common starting point is 80-100 Hz, ideally overlapping with the HP filter setting of your main speakers.
- Bass EQ: Use the Bass EQ control on the subwoofer channel to fine-tune the bass response to your preference. Use sparingly to avoid distortion.
- Turn-On Type: Select the appropriate turn-on type (DC REM or REM) based on your head unit's remote output signal.
Системаны жөндөө
After initial setup, play various types of music to fine-tune the system. Adjust gain, crossover frequencies, and bass EQ settings incrementally to achieve a balanced and clear sound across all frequencies. Listen for clarity, bass impact, and overall sound stage.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Alpine audio system.
- Тазалоо: Жумшак, кургак чүпүрөктү колдонуп, аарчыңыз amplifier and speaker surfaces. Avoid abrasive cleaners or solvents.
- Вентиляция: камсыз кылуу amplifier's cooling fins are free from dust and debris to prevent overheating. Do not block ventilation openings.
- Байланыштары: Мезгил-мезгили менен бардык зымдарды туташтыргычтын бекемдигин жана коррозиясын текшерип туруңуз. Бошоң байланыштар начар иштешине же бузулушуна алып келиши мүмкүн.
- Курчап турган чөйрө: Protect the components from extreme temperatures, moisture, and direct sunlight.
Проблемаларды чечүү
If you encounter issues with your Alpine audio system, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Эч бир динамиктен үн чыкпайт |
|
|
| Бурмаланган үн |
|
|
| One or more speakers not working |
|
|
| Amplifier goes into protection mode (light changes color or turns off) |
|
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Product Bundle Model Name | Alpinebdl241209-08 |
| UPC | 840425850855 |
| Элемент Салмагы | 28.7 фунт |
| Пакеттин өлчөмдөрү | 15 x 12.5 x 12.5 дюйм |
| Өндүрүүчү | Альп |
| Дата биринчи жеткиликтүү | 11-декабрь, 2024-жыл |
Alpine S2-A55V Amplifier өзгөчөлүктөрү
- Каналдар: 5-Channel (4 + 1 Subwoofer)
- Power Output (4Ω): 40W RMS x 4 + 200W RMS x 1
- Power Output (2Ω): 60W RMS x 4 + 300W RMS x 1
- Тастыктоо: Hi-Res Audio тастыкталган
- Жыштык жообу: 40 кГц чейин
- Өзгөчөлүктөрү: Selectable remote turn-on circuit, Built-in crossovers (HP/LP filters), Bass EQ
Alpine S2-S40C 4" Component Speaker Specifications
- Динамик түрү: Компонент
- Өлчөмү: 4 дюйм
- Чоку күчү: 140 Вт
- Технология: HAMR Surround
- Тастыктоо: Hi-Res тастыкталган
Alpine S2-S40 4" Coaxial Speaker Specifications
- Динамик түрү: Коаксиалдуу
- Өлчөмү: 4 дюйм
- Орнотуу: OEM
- Технология: HAMR Surround
- Тастыктоо: Hi-Res тастыкталган
Alpine S2-W10D4 10" Subwoofer Specifications
- Өлчөмү: 10 дюйм
- RMS күчү: 600 Вт
- Чоку күчү: 1800 Вт
- Конус материалы: Carbon fiber and polypropylene
- Үн катушкасы: Dual Voice Coil (DVC)
- Монтаждоо: Twist-lock grille mount system
Кепилдик маалымат
Alpine products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Alpine webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
Колдоо жана Байланыш
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Alpine customer support. You can find contact information and additional resources on the official Alpine webсайт.
зыярат кылыңыз Amazon'догу Alpine дүкөнү көбүрөөк маалымат жана продуктулар үчүн.
