Introduction
Thank you for choosing the ThinkRider Shock Pump MP9. This high-pressure pump is specifically designed for precise inflation of mountain bike front forks, rear shocks, and seat tubes. Featuring a durable aluminum alloy construction, an easy-to-read gauge, and versatile valve compatibility, the MP9 ensures optimal suspension performance for a smoother ride. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Негизги өзгөчөлүктөрү
- Атайын дизайн: Optimized for forks, shocks, and seat tubes.
- Кош клапан шайкештиги: Easily switch between Presta and Schrader valves for a tight, leak-free seal.
- High Pressure & Precision Gauge: Max 350PSI/24Bar with an easy-to-read 1.5-inch industrial gauge for accurate pressure readings.
- Fine-Tuning Exhaust Button: Allows riders to precisely set air shock or fork pressure.
- Ergonomic T-Handle: Designed for comfortable grip and effortless pumping, collapsible for easy storage.
- Туруктуу курулуш: Lightweight aluminum alloy barrel for longevity.
- Портативдик дизайн: Compact size (Shrink length 11 inches, stretch length 15.7 inches, Weight 0.17kg) for on-the-go adjustments.
Сүрөт: бүттүview of the ThinkRider Shock Pump highlighting its features including the gauge, Schrader compatibility, 350 PSI maximum pressure, and suitability for mountain bikes.
Сүрөт: деталдуу view of the shock pump's 1.5-inch industrial pressure gauge, displaying both PSI and Bar measurements for accurate inflation.
Image: The ergonomic, pinch-free T-handle of the pump, designed for comfortable and effortless use, and shown in its collapsible state for easy storage.
Image: A close-up of the CNC alloy barrel, highlighting its full aluminum alloy construction for lightweight durability.
Жайгашуу
- Клапанды даярдоо: Locate the air valve on your bicycle's front fork, rear shock, or seat tube. Remove any protective caps.
- Насосту туташтыруу: The ThinkRider Shock Pump is compatible with both Presta and Schrader valves. Firmly screw the pump's connector onto the valve stem until it is securely attached and no air is leaking.
- Check Initial Pressure: Once connected, the gauge will display the current air pressure in your suspension component.
Video: Demonstration of how to use a bike shock pump on a bicycle fork, including removing the valve cap, attaching the pump, and checking pressure. This video is provided by Bucklos-Sellect.
Иштөө нускамалары
- Үстүрүү: Hold the pump firmly and extend the T-handle. Begin pumping by pushing and pulling the handle. Observe the pressure gauge as you pump.
- Монитор басымы: Continue pumping until the desired PSI (or Bar) is reached. Refer to your bicycle manufacturer's recommendations for optimal pressure settings based on your weight and riding style.
- Fine-Tuning (Bleed Button): If you over-inflate or need to make small adjustments, gently press the red bleed button located near the gauge. This will release small amounts of air, allowing for precise pressure setting.
- Насосту ажыратуу: Once the desired pressure is achieved, unscrew the pump connector from the valve stem. The anti-leak design minimizes air loss during detachment. Reinstall the protective valve cap.
Video: A demonstration of the features and operation of a shock pump, including its precision gauge, anti-leak valve, ergonomic T-handle, and fine-tune bleed button. This video is provided by Pro Bike Tool.
Техникалык тейлөө
To ensure the longevity and optimal performance of your ThinkRider Shock Pump, follow these simple maintenance guidelines:
- Тазалоо: Wipe the pump clean with a soft, dry cloth after each use to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
- Сактагыч: Store the pump in a dry, cool place away from direct sunlight and extreme temperatures. Collapse the T-handle for compact storage.
- Текшерүү: Periodically check the hose and connectors for any signs of wear or damage. Ensure the valve cap is always replaced on your bike's suspension to prevent dirt ingress.
Проблемаларды чечүү
- Air Leakage During Pumping: Ensure the pump connector is fully and securely threaded onto the valve stem. Check the valve core on your suspension for any damage or looseness.
- Туура эмес өлчөө көрсөткүчү: Ensure the pump is properly connected. If readings are consistently off, the gauge may need calibration or replacement.
- Difficulty Pumping: High-pressure pumps require more effort as pressure increases. Ensure the pump is clean and free of obstructions. If resistance is unusually high at low pressures, check for internal issues.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | ThinkRider |
| Модель аты | MP9 |
| Материал | Алюминий |
| Түс | Кара |
| Элемент Салмагы | 6.08 унция (0.17 кг) |
| Product Dimensions (Shrink) | 3.15"L x 1.57"W x 11"H |
| Product Dimensions (Stretch) | 15.7" H |
| Максималдуу басым | 350 PSI / 24 Bars |
| Иштөө режими | Manual |
| Шлангдын узундугу | 5.3 Inches (26.5 cm extended) |
| Камтылган компоненттер | Насос *1 |
Image: Detailed specifications and dimensions of the ThinkRider Shock Pump, including its length, weight, material, and maximum pressure.
Кепилдик жана колдоо
The ThinkRider Shock Pump MP9 comes with a 1 жылдык кепилдик from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any inquiries, please contact ThinkRider customer service through the retailer where the product was purchased or visit the official ThinkRider webбайланыш маалыматы үчүн сайт.
Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактап коюңуз.
