СИНОТИМЕР DDS6619

SINOTIMER DDS6619 Din Rail бир фазалуу энергия эсептегич колдонуучусунун колдонмосу

Model: DDS6619

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter front view

Сүрөт 1: Алдыңкы view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.

2. Коопсуздук маалыматы

Please observe the following safety precautions to prevent injury and damage to the device:

3. Пакеттин мазмуну

Пакетти ачканда, бардык буюмдардын бар экенин жана бузулбаганын текшериңиз:

4. Продукциянын өзгөчөлүктөрү

The DDS6619 energy meter offers a range of features for efficient power monitoring:

DDS6619 display modes showing temporary and total readings for kWh, voltage, current, power, frequency, and power factor

Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.

5. Орнотуу жана орнотуу

5.1 Өлчөмдөр

The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:

DDS6619 dimensions showing width 36.3mm, height 78.5mm, and depth 65.8mm

Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.

5.2 Монтаждоо

  1. Ensure the main power supply is turned off at the circuit breaker before proceeding.
  2. Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
  3. Ensure the meter is securely fastened to prevent movement.

5.3 Электр өткөргүч схемасы

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.

DDS6619 wiring diagram showing L and N connections for input and output

Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.

  1. Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
  2. Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
  3. Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
  4. Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
  5. Электр кубатын калыбына келтирүүдөн мурун, бардык туташуулардын бекемдигин жана тууралыгын эки жолу текшериңиз.

6. Иштөө нускамалары

6.1 Кубат күйгүзүлдү

After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.

6.2 Көрсөтүү режимдери

The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).

6.3 Reset Function for Temporary kWh

The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.

DDS6619 reset function explanation showing temporary and total power consumption and reset button

Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.

  1. Locate the reset button on the front panel of the meter.
  2. Press and hold the reset button for approximately 6 seconds.
  3. The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.

7. Техникалык шарттар

ПараметрНарк
МоделDDS6619
Rated Voltage120VAC
Номиналдуу ток5(80)А
Жыштык60Hz
Тактык классы1.0
ДисплейBlue Backlight менен LCD
Монтаждоо35 мм DIN темир жол
МатериалЖалынга каршы ABS
Пакеттин өлчөмдөрү2.72 x 1.65 x 0.63 дюйм
Салмагы0.48 унция

8. Техникалык тейлөө

The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:

9. Кыйынчылыктарды

If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
No display/Meter not powering onЭлектр менен камсыздоо жок; Туура эмес зымдар; Бузук эсептегичCheck power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support.
Так эмес окууларIncorrect wiring; Overload; External interferenceRe-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields.
Temporary kWh not resettingReset button not held long enoughPress and hold the reset button for a full 6 seconds.
Total kWh reading is zero or incorrectIncorrect wiring; Meter malfunctionVerify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support.

10. Кепилдик жана колдоо

SINOTIMER products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SINOTIMER webсайт.

Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз Amazon'догу SINOTIMER дүкөнү.

Тектеш документтер - DDS6619

Preview SINOTIMER DDS6619 сериясынын колдонмосу, рельс өлчөөчү которгучтун колдонмосу
SINOTIMER DDS6619 сериясындагы жетектөөчү рельс түрүндөгү өлчөөчү өчүргүчтөр үчүн колдонмо. Акылдуу энергияны көзөмөлдөө үчүн техникалык мүнөздөмөлөр, зымдар, колдонмону башкаруу, иштетүү боюнча нускамалар жана коопсуздук чаралары жөнүндө маалымат.
Preview SINOTIMER SVP719 Колдонуучунун колдонмосу: Томtage Protector, Энергия өлчөгүч жана Энергияны керектөө монитору
SINOTIMER SVP719 үчүн комплекстүү колдонуучу колдонмосу, анын өзгөчөлүктөрүн деталдуу түрдө жөнгө салынуучу үстөк/төмөндөtagе коргоочу, толкундан коргоочу, ашыкча ток чектөө релеси жана электр энергиясын керектөөнү көзөмөлдөө үчүн Ватт/кВт саат энергия эсептегич.
Preview SINOTIMER TM-610 Digital Time Switch for DIN Rail - Колдонуучунун колдонмосу жана спецификациялары
SINOTIMER TM-610 санариптик убакыт которгучунун деталдуу мүнөздөмөлөрү, электр өткөргүч схемалары жана иштөө нускамалары, DIN рельсин орнотуу үчүн иштелип чыккан.
Preview SINOTIMER TM928 Series HD LCD Digital Timer Switch - Колдонуучунун колдонмосу жана спецификациялары
TM919, TM920, TM928, TM928S, TM928R жана TM929 сыяктуу моделдер үчүн функцияларды, спецификацияларды, орнотууларды жана зымдарды камтыган SINOTIMER TM928 сериясынын санариптик таймер которгучтары боюнча комплекстүү колдонмо.
Preview SINOTIMER TM929: Guía del Temporizador Analógico Diario de 24 Horas
24 сааттын ичинде SINOTIMER TM929 аналогдук диагностикасын изилдеңиз. Кол менен пропорциялуу маалымат деталдаштырылган өзгөчөлүктөрдү, өзгөчө техникаларды жана схемаларды кабелдик орнотууларды жана операциондорду орнотуу.
Preview SINOTIMER TM-630A/TM-630S санариптик таймер: өзгөчөлүктөрү жана спецификациялары
SINOTIMER TM-630A жана TM-630S санариптик программалоочу таймерлердин деталдуу техникалык мүнөздөмөлөрү жана өзгөчөлүктөрү, анын ичинде электр менен камсыздоо, убакыт диапазону, өлчөмдөрү жана зымдары.