FUXTEC FX-EV360 Electric Aerator and Scarifier User Manual

1. Киришүү

This manual provides essential instructions for the safe and effective operation, assembly, and maintenance of your FUXTEC FX-EV360 Electric Aerator and Scarifier. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage. Keep this manual in a safe place for future reference.

The FUXTEC FX-EV360 is designed to improve the health and appearance of your lawn by removing moss, thatch, and dry debris. It features a powerful 1500W motor, a 36 cm working width, and 5 adjustable depth levels for versatile lawn care.

2. Коопсуздук нускамалары

Жалпы коопсуздук эскертүүлөрү:

• Always wear appropriate personal protective equipment (PPE) such as safety glasses, sturdy footwear, and hearing protection when operating the machine.
• Ensure the work area is clear of stones, sticks, wires, and other debris that could be thrown by the machine.
• Балдарды, үй жаныбарларын жана жанында жүргөндөрдү операция жасалган жерден коопсуз аралыкта (кеминде 5 метр) кармаңыз.
• Never operate the machine in wet conditions or rain.
• Before performing any maintenance, cleaning, or when leaving the machine unattended, always disconnect it from the power supply.
• Inspect the power cord regularly for damage. If damaged, have it replaced by a qualified electrician.
• Эгерде бөлүктөрү бузулуп же жок болсо, машинаны колдонбоңуз.
• Машинаны күндүз же жакшы жасалма жарыкта гана иштетиңиз.
• Always maintain a firm grip on the handles and walk, do not run, while operating the machine.

Электр коопсуздугу:

• электр менен жабдууну камсыз кылуу voltage matches the rating on the machine's label.
• Use only extension cords suitable for outdoor use and rated for the machine's power consumption.
• Do not abuse the cord. Never carry the machine by the cord or yank it to disconnect from the outlet.
• Шнурды ысыктан, майдан, курч жээктерден же кыймылдуу бөлүктөрдөн алыс кармаңыз.

3. Продукт бүтүп калдыview

The FUXTEC FX-EV360 is an electric aerator and scarifier designed for efficient lawn maintenance.

Сүрөт 1: Алдыңкы view of the FUXTEC FX-EV360 Electric Aerator and Scarifier.

2-сүрөт: Бурчтуу view of the FUXTEC FX-EV360, highlighting the handle and collection bag.

3-сүрөт: астыңкы жагы view showing the roller mechanism and depth adjustment lever.

Figure 4: Close-up of the interchangeable roller with tines for scarifying or aerating.

Негизги компоненттер:

• Мотор корпусу: Contains the 1500W electric motor.
• Рул: Ergonomic design with quick-release clamps for easy adjustment and storage.
• Operating Switch: Power control for the motor.
• Тереңдикти жөндөө рычагы: Allows selection of 5 working depth levels.
• Коллекция сумкасы: 45-liter capacity for collecting removed debris.
• Роликтер: Interchangeable rollers for scarifying (blades) and aerating (spring tines).
• Дөңгөлөктөр: For easy maneuverability across the lawn.

4. Орнотуу жана чогултуу

The FUXTEC FX-EV360 is designed for straightforward assembly. Follow these steps:

1. Пакеттен чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Кандайдыр бир бузулган же жетишпеген бөлүктөрүн текшериңиз.
2. Рулдун жыйындысы: Attach the lower handlebar sections to the main unit. Secure them using the provided screws or quick-release clamps. Then, attach the upper handlebar section, ensuring the operating switch and cable are correctly positioned and secured.
3. Roller Installation: The unit typically comes with one roller pre-installed. If you need to change the roller (e.g., from scarifier to aerator), refer to the "Roller Replacement" section in Maintenance. Ensure the chosen roller is securely fastened before operation.
4. Коллекциялык баштыктын тиркемеси: Hook the 45-liter collection bag onto the designated points at the rear of the machine. Ensure it is securely attached to prevent debris from escaping.
5. Кабелдик башкаруу: Secure the power cable along the handlebar using the provided clips to prevent it from interfering with operation or getting damaged.

Note: While assembly is generally intuitive, always refer to the detailed diagrams in the printed manual for precise steps.

5. Иштөө нускамалары

Before starting, ensure all safety instructions have been read and understood.

1. Даярдоо:
   • Clear the lawn of any obstacles like stones, toys, or branches.
   • Mow the lawn to a short height (e.g., 2-3 cm) before scarifying or aerating for best results.
   • Ensure the lawn is dry. Operating on wet grass can clog the machine and reduce effectiveness.
2. Selecting Working Depth:
   • The FUXTEC FX-EV360 offers 5 adjustable depth levels, ranging from -12 mm to +10 mm.
   • Use the depth adjustment lever, typically located on the side of the machine, to select the desired depth.
   • For initial scarifying, start with a shallower depth and gradually increase if needed. For aeration, a deeper setting might be appropriate.
   • The '+' settings are for raking (light dethatching), while the '-' settings are for scarifying (deeper cutting).
3. Машинаны ишке киргизүү:
   • Connect the machine to a suitable power outlet.
   • Press and hold the safety button (if present) and then squeeze the operating lever on the handlebar to start the motor.
   • The motor will start immediately.
4. Операция:
   • Push the machine forward at a steady, moderate pace. Avoid pushing too fast, which can reduce effectiveness, or too slow, which can overload the motor.
   • Overlap each pass slightly to ensure complete coverage of the lawn.
   • Empty the 45-liter collection bag regularly to maintain optimal performance and prevent clogging.
   • When turning, release the operating lever to stop the motor, lift the front of the machine slightly, pivot, and then restart.
5. Машинаны токтотуу:
   • Release the operating lever to stop the motor.
   • Wait for the roller to come to a complete stop before moving away from the machine or performing any tasks.
   • Always disconnect the power cord after use.

6. Техникалык тейлөө жана сактоо

Regular maintenance ensures the longevity and optimal performance of your FUXTEC FX-EV360.

1. Тазалоо:
   • After each use, disconnect the power supply.
   • Clean the machine thoroughly, especially the roller and the underside of the housing, to remove grass, soil, and debris. Use a brush or a damp кездеме. Суу агымдарын же жогорку басымдагы тазалоочу каражаттарды колдонбоңуз.
   • Желдетүү тешиктери таштандылардан таза болушун камсыз кылыңыз.
   • Clean the collection bag as needed.
2. Роликти алмаштыруу:
   • Электр менен камсыздоону ажыратыңыз.
   • Carefully tilt the machine to access the underside.
   • Locate the roller retention mechanism (e.g., bolts, clips).
   • Remove the current roller and install the desired roller (scarifier or aerator), ensuring it is correctly seated and secured.
   • Always ensure the roller is firmly attached before resuming operation.
3. Сактагыч:
   • Сактоодон мурун машинаны жакшылап тазалаңыз.
   • Машинаны кургак, жакшы желдетилген жерде, күн нуру түз тийген жерден жана өтө жогорку температурадан алыс сактаңыз.
   • The handlebar can be folded using the quick-release clamps for compact storage.
   • Балдар жетпеген жерде сактаңыз.
4. Текшерүү:
   • Regularly inspect the rollers for wear or damage. Replace worn or damaged rollers immediately.
   • Бардык бурамалар менен бекиткичтердин бекемдигин текшериңиз.
   • Inspect the power cord for any cuts, abrasions, or signs of damage.

7. Кыйынчылыктарды

This section addresses common issues you might encounter. For problems not listed here, contact FUXTEC customer support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

FUXTEC products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FUXTEC webсайт.

For technical assistance, spare parts, or service inquiries, please contact FUXTEC customer support.

• Өндүрүүчү: FUXTEC
• Колдоо: Refer to your purchase documentation or the FUXTEC official webбайланыш маалыматы үчүн сайт.