Parkside Performance 20V зымсыз сокку ачкычы PASSP 20-Li C4 колдонуучусунун колдонмосу

1. Киришүү

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Parkside Performance 20V Cordless Impact Wrench PASSP 20-Li C4. Please read these instructions carefully before using the tool and retain them for future reference.

1.1 Коопсуздук маалыматы

Always observe general power tool safety warnings and instructions provided with the product. Wear appropriate personal protective equipment, such as safety glasses and hearing protection, during operation. Ensure the work area is clean and well-lit. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.

1.2 Пакеттин мазмуну

• Parkside Performance 20V Cordless Impact Wrench PASSP 20-Li C4
• 1 x 4 Ah Battery (if included in bundle)
• 1 x Charger (if included in bundle)
• 3 x Sockets (1/2 inch mount, 17-19-21 mm; length 75 mm)
• 1 x Adapter (1/2 inch to 3/4 inch)
• 1 x Parkside Performance Folding Rule (2 m, black)
• Сактоочу куту

Verify that all items are present and undamaged upon unpacking. If any parts are missing or damaged, contact customer support.

Image 1.1: The Parkside Performance 20V Cordless Impact Wrench, along with its included accessories, neatly organized within its durable storage case.

Image 1.2: The Parkside Performance folding rule, a 2-meter measuring tool included with the product.

2. Орнотуу

2.1 Батареяны орнотуу жана заряддоо

1. Ensure the battery is fully charged before first use. Connect the charger to a power outlet and insert the battery pack. Refer to the charger's separate instructions for detailed charging procedures.
2. To install the battery, align the battery pack with the base of the impact wrench handle and slide it in until it clicks securely into place.
3. Батареяны чыгаруу үчүн, батареянын таңгагындагы чыгаруу баскычын басып, аны сыртка жылдырыңыз.

Сүрөт 2.1: Жакын план view of the Parkside X 20V Team battery pack, highlighting its design and connection points.

Image 2.2: The Parkside X 20V Team battery alongside its compatible charger, ready for power management.

2.2 Аксессуарларды тиркөө

1. Аксессуарларды орнотуудан же алып салуудан мурун, шайман өчүрүлгөнүн жана батарейка чыгарылганын текшериңиз.
2. The impact wrench features a 1/2 inch square drive. To attach a socket, simply push it onto the square drive until it locks securely.
3. To use the 3/4 inch adapter, first attach the adapter to the 1/2 inch square drive, then attach the 3/4 inch socket to the adapter.

Image 2.3: The Parkside Performance 20V Cordless Impact Wrench with a 1/2 inch socket securely attached to its drive.

3. Иштөө нускамалары

3.1 Күйгүзүү/өчүрүү жана ылдамдыкты көзөмөлдөө

• To power on the tool, press the trigger switch. The speed and impact rate are controllable by the pressure applied to the trigger.
• Өчүрүү үчүн, которгучту кое бериңиз.

3.2 Torque Level Selection

The impact wrench features 3 selectable torque levels, indicated by an LED display. Use the torque selection button to cycle through the levels:

• Level 1: Approximately 130 Nm
• Level 2: Approximately 400 Nm
• Level 3: Approximately 1356 Nm (Maximum)

Select the appropriate torque level for your application to prevent overtightening or damage.

3.3 Rotation Direction

A switch located near the trigger allows you to select forward (tightening) or reverse (loosening) rotation. Ensure the tool has come to a complete stop before changing the direction of rotation.

3.4 Integrated LED Work Light

The tool is equipped with an integrated LED work light that illuminates the work surface for optimal visibility, especially in dimly lit areas.

3.5 Brushless Motor Technology

The brushless motor design provides increased efficiency, extended service life, and reduced wear compared to traditional brushed motors.

3.6 Parkside Smart Battery X 20V PAPS (Optional)

When using Parkside Smart Batteries X 20V PAPS, the tool offers optimum performance through individual device configuration and data monitoring via the Parkside app. The device features an illuminated smart app LED when an active connection is established, along with an integrated battery management system for intelligent control of charging cycles, speed, heat management, and overcharge protection.

Image 3.1: The Parkside Performance 20V Cordless Impact Wrench, illustrating its ergonomic design and accessible controls for operation.

4. Техникалык тейлөө

4.1 Тазалоо

• Тазалоодон мурун дайыма батарейканы алып салыңыз.
• Keep the ventilation openings clear and free from dust.
• Курал корпусун жумшак менен сүртүңүз, гamp кездеме. Катуу тазалоочу каражаттарды же эриткичтерди колдонбоңуз.

4.2 Сактоо

• Store the tool and accessories in the provided storage case in a dry, secure place, out of reach of children.
• For long-term storage, remove the battery pack from the tool.

5. Кыйынчылыктарды

If you encounter issues with your impact wrench, refer to the following common troubleshooting steps:

• Курал башталбайт: Ensure the battery is fully charged and properly inserted. Check for any obstructions in the trigger mechanism.
• Төмөндөтүлгөн аткаруу: The battery may be low on charge. Recharge the battery. Ensure the correct torque level is selected for the task.
• Ашыкча ысып кетүү: Allow the tool to cool down. Ensure ventilation openings are not blocked. Avoid continuous heavy-duty use without breaks.

For persistent issues not resolved by these steps, contact customer support.

6. Техникалык шарттар

7. Кепилдик жана колдоо

This Parkside Performance product typically comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. One of the product images indicates a 5-year warranty.

For technical support, spare parts, or warranty claims, please contact your retailer or the official Parkside customer service. Contact details can usually be found on the product packaging or the manufacturer's webсайт.