TANITA TT-558 Саат жана календарь менен санариптик термометр/гигрометр колдонуучунун колдонмосу

Introduction

Welcome to the user manual for your TANITA TT-558 Digital Thermometer/Hygrometer. This device is designed to provide accurate measurements of temperature and humidity, along with clock and calendar functions, in a compact and versatile design. Please read this manual thoroughly to ensure proper setup, operation, and maintenance of your device.

Image: The TANITA TT-558 Digital Thermometer/Hygrometer, showcasing анын компакт дизайн жана так санарип дисплей.

Продукт өзгөчөлүктөрү

• Компакт жана портативдик дизайн: Measuring approximately 3 inches (7.5 cm) in width and height, and 1.2 inches (3 cm) in depth, weighing about 3.5 oz (100g) including batteries.
• Көп функциялуу дисплей: Simultaneously shows Clock, Date, Day, Temperature, and Humidity.
• Max/Min Record: Automatically records and displays the highest and lowest temperature and humidity readings.
• Өлчөө диапазону: Temperature from -5°C to 50°C (23°F to 122°F), Humidity from 20% to 95%.
• Ар тараптуу монтаждоо: Can be used as a desktop unit, wall-mounted using the integrated hook hole, or attached to metal surfaces with its built-in magnet.
• Туруктуу курулуш: Main body made of ABS (Acrylonitrile Butadiene Styrene) resin, with a PMMA (Acrylic) lens.

Image: The TANITA TT-558 device, illustrating its clear digital display which includes temperature, humidity, and calendar information.

Жайгашуу

Батарея орнотуу

The TANITA TT-558 requires one AAA battery for operation. Please follow these steps to install the battery:

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Slide or gently pry open the cover.
3. Insert one AAA battery, ensuring the correct polarity (+ and - terminals match the markings inside the compartment).
4. Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.

Initial Placement for Accurate Readings

For the most accurate temperature and humidity readings, observe the following placement guidelines:

• Түздөн-түз күндүн нурунан качуу: Do not place the unit in direct sunlight, as this can cause inaccurate temperature readings.
• Avoid Direct Airflow: Keep the unit away from direct airflow from air conditioners, heaters, or fans.
• Турукташтырууга уруксат берүү: After initial setup or relocation, allow approximately 30 minutes for the device to stabilize and display accurate values for its new environment.

Image: Illustrations demonstrating optimal placement for the device, away from direct sunlight and air conditioning vents, to ensure accurate measurements.

Иштөө нускамалары

Убакыт жана дата орнотуу

Refer to the buttons on the back of the unit (typically labeled 'SET', 'MODE', 'ADJ', or similar) to adjust the time and date. Specific button functions may vary slightly, but generally involve:

1. Pressing a 'MODE' or 'SET' button to enter setting mode.
2. Using 'ADJ' or arrow buttons to change values (hours, minutes, year, month, day).
3. Pressing 'MODE' or 'SET' again to confirm and move to the next setting.

Дисплей режимдери

The device allows you to select different combinations of information to be displayed. You can typically cycle through these modes using a dedicated button (e.g., 'MODE' or 'DISPLAY'). Common display options include:

• Clock Only: Учурдагы убакытты көрсөтөт.
• Clock and Day: Shows the current time and day of the week.
• Date and Day: Displays the current date and day of the week.

Image: A visual guide to the various display modes available on the TT-558, including time, time with day, and date with day.

Viewing Maximum/Minimum Readings

үчүн view the recorded maximum and minimum temperature and humidity values, press the 'MAX/MIN' button. Each press will cycle through the maximum temperature, minimum temperature, maximum humidity, and minimum humidity. To reset these values, typically hold down the 'MAX/MIN' button for a few seconds.

Монтаждоо параметрлери

The TANITA TT-558 offers three convenient ways to place or mount the device:

• Иш тактада жайгаштыруу: Use the integrated stand to place the unit on any flat surface.
• Дубалга орнотуу: Utilize the hook hole on the back of the unit to hang it on a nail or screw.
• Магниттик тиркеме: The built-in magnet allows for easy attachment to metallic surfaces like refrigerators or whiteboards.

Сүрөт: Visual examples of the TT-558's versatile mounting options, including magnetic attachment, desktop placement, and the rear view showing the hook hole.

Техникалык тейлөө

Тазалоо

To clean the device, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.

Батареяны алмаштыруу

When the display becomes dim or the unit stops functioning, it is time to replace the AAA battery. Follow the battery installation steps outlined in the Setup section.

Проблемаларды чечүү

• Дисплей жок / Күңүрт дисплей: Check battery polarity. Replace with a fresh AAA battery.
• Туура эмес окуулар: Ensure the unit is placed away from direct sunlight, heat sources, or air conditioning vents. Allow 30 minutes for stabilization after moving.
• Баскычтар жооп бербейт: Remove and reinsert the battery to perform a soft reset. If the issue persists, replace the battery.

Продукт спецификациялары

Image: Detailed dimensions of the TT-558 unit, indicating its compact size.

Кепилдик жана колдоо

For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official TANITA webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.