1. Киришүү
This manual provides detailed instructions for the proper installation, operation, and maintenance of the GODIYMODULES High Voltage DC Converter Module Board. This module is designed to provide stable high voltage DC and filament voltage, suitable for applications such as powering Nixie tubes and Magic Eye tubes.
Сүрөт 1.1: жогорудан ылдыйга view of the GODIYMODULES High Voltage DC Converter Module Board. This image shows the overall layout of the components, including capacitors, inductors, the DC input jack, and the terminal blocks for input and output connections.
2. Коопсуздук маалыматы
WARNING: This module generates high voltage. Improper handling can result in electric shock, injury, or damage to equipment. Always exercise extreme caution when working with high voltagэлектрондук схемалар.
- Ensure the power supply is disconnected before making any connections or adjustments.
- Do not touch any components on the board when power is applied.
- Use appropriate insulation and safety equipment.
- Verify all connections are correct before applying power.
- This module is intended for experienced electronics hobbyists and professionals.
3. Өзгөчөлүктөрү
- Designed for Nixie and Magic Eye Tube anode and filament power supply.
- Жөнгө салынуучу жогорку томtage DC output.
- Dedicated 6.3V filament voltage чыгаруу.
- Compact board design.
4. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Киргизүү көлөмүtage | DC 9V-12V |
| DC Socket Specification | 5.5*2.1 mm (Inner Positive, Outer Negative) |
| Жогорку Voltagд | DC 150V-280V / 15mA (Adjustable) |
| Filament Voltagд | DC 6.3V/1500mA |
| Өлчөмдөр | Болжол менен 5.24 x 3.82 x 1.34 дюйм (Таңгак) |
| Салмагы | Болжол менен 0.634 унция |
| Материал | Металл, пластик |
5. Орнотуу жана байланыштар
Follow these steps to correctly connect the High Voltage DC Converter Module Board to your system. Ensure all power is disconnected before proceeding.
5.1 Киргизүү кубатына туташуу
The module accepts a DC input voltage between 9V and 12V. There are two methods for providing input power:
- DC Power Jack: Use a DC power adapter with a 5.5*2.1 mm plug. The plug must be inner positive and outer negative.
- Терминал блогу: Connect your DC 9V-12V power supply to the designated input terminals on the green screw terminal block. Observe correct polarity.
Image 5.1: Connection diagram showing input and output terminals. The DC 9-12V input can be connected via the barrel jack (5.5*2.1mm, inner positive, outer negative) or the screw terminal block. The image also indicates the output voltage regulation potentiometer.
Image 5.2: Detailed connection diagram illustrating the input power options (DC 9-12V via barrel jack or screw terminals) and the output connections for 6.3V filament voltage, GND, and adjustable DC 150-280V. The output voltage adjustment potentiometer is also clearly marked.
5.2 Чыгуу байланыштары
The module provides two main outputs via the green screw terminal block:
- DC 150V-280V Output: Бул жогорку томtage output, adjustable via the onboard potentiometer. Connect the anode of your Nixie or Magic Eye tube to this output.
- DC 6.3V чыгышы: This output provides 6.3V for tube filaments. Connect the filament of your tube to this output.
- GND: Common ground connection for both outputs.
Ensure all connections are secure and correctly polarized before applying power.
6. Иштөө нускамалары
6.1 Күйгүзүү
Once all connections are verified and secure, connect the DC 9V-12V power supply to the module. The module will immediately begin generating the output voltages.
6.2 Adjusting High Voltagд
Жогорку томtage output (DC 150V-280V) is adjustable using the blue potentiometer located on the board. Use a small screwdriver to carefully turn the potentiometer:
- Айлануу саат жебеси боюнча болот көбөйтүү чыгаруу томtage.
- Айлануу сааттын жебесине каршы болот азайтуу чыгаруу томtage.
Always use a multimeter to measure the output voltage while adjusting to prevent over-voltage damage to your connected components.
Сүрөт 6.1: Жогорку view of the module, clearly showing the blue potentiometer used for adjusting the high voltage чыгаруу.
7. Техникалык тейлөө
The GODIYMODULES High Voltage DC Converter Module Board is designed for reliable operation and requires minimal maintenance.
- Модулду чаңдан жана таштандыдан таза жана таза кармаңыз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн модулдун айланасында жетиштүү желдетүүнү камсыз кылыңыз.
- Модулду нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
- Regularly inspect connections for looseness or corrosion.
8. Кыйынчылыктарды
- No Output Voltage:
- Verify the input power supply is connected and providing 9V-12V DC.
- Check the polarity of the input DC power plug (inner positive, outer negative).
- Ensure all output connections are secure.
- Туура эмес чыгаруу томtage:
- Жогорку том үчүнtage output, adjust the potentiometer as described in Section 6.2.
- Use a multimeter to accurately measure the output voltages.
- Киргизүү көлөмүн камсыз кылыңызtage туруктуу жана белгиленген диапазондо.
- Модулдун ысып кетиши:
- Модулдун айланасында жетиштүү аба айланышын камсыз кылыңыз.
- Verify that the load connected to the outputs does not exceed the specified current limits (15mA for HV, 1500mA for 6.3V).
9. Колдоо
For further assistance or technical inquiries, please refer to the seller's contact information on the product purchase page or visit the GODIYMODULES official support channels.
