1. Продукт бүтүп калдыview
The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.
This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.
Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.
2. Шайкештик жөнүндө маалымат
These running boards are specifically designed for:
- Унаа: 2024-2026 Toyota Tacoma
- Кабинанын түрү: Double Cab (4 full-size doors)
- Шайкештик: Includes Hybrid models
Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.
Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.
3. Орнотуу жана орнотуу
3.1. Камтылган компоненттер
Орнотууну баштоодон мурун, бардык компоненттер бар экендигин текшериңиз:
- Айдоочу тараптагы чуркоо тактасы
- Жүргүнчү тараптагы чуркоо тактасы
- All necessary hardware and mounting brackets
- Орнотуу боюнча колдонмо (бул документ)
3.2. Орнотуу кадамдары
Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.
- Унаа даярдоо: Унааңызды тегиз жерге токтотуп, токтоочу тормозду басыңыз.
- Монтаждоо пункттарын аныктоо: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
- Кашаларды тиркөө: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
- Чуркоо тактасынын абалы: Carefully lift and align the running board with the attached brackets.
- Secure Running Board: Attach the running board to the brackets using the remaining hardware.
- Тууралоо жана бекемдөө: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
- Башка тарап үчүн кайталаңыз: Follow the same steps for the opposite side of the vehicle.
Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.
4. Иштөө нускамалары
The Tyger Access Running Boards are designed for straightforward use. To operate:
- Ensure the running boards are securely installed before use.
- When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
- The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.
Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.
5. Техникалык тейлөө
To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:
- үзгүлтүксүз тазалоо: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
- Текшерүү: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
- Аяктоону коргоо: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.
Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.
6. Кыйынчылыктарды
Эгерде сиз чуркоо такталарыңыз менен кандайдыр бир көйгөйлөргө туш болсоңуз, төмөнкүлөрдү карап көрүңүз:
- Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
- адаттан тыш үндөр: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
- Орнотуудагы кыйынчылык: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).
Эгерде бул кадамдар менен чечилбеген туруктуу көйгөйлөр болсо, кардарларды колдоо кызматына кайрылыңыз.
7. Техникалык шарттар
| Модель номери | TG-AS2T24003 |
| Бренд | Тайгер Авто |
| Материал | Carbon Steel |
| Сырткы бүтүрүү | Textured Black Powder E-Coating |
| Элементтин өлчөмдөрү (L x W x Y) | 76.69 x 7.24 x 5.59 дюйм |
| Элемент Салмагы | 39.2 фунт |
| Салмак сыйымдуулугу | 500 фунт |
| Ground Clearance (approx.) | 15 дюйм |
| UPC | 810171270504 |
Image 7.1: Detailed dimensions of the Tyger Access Running Board.
Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.
8. Кепилдик маалыматы
Tyger Auto provides a 5 жылдык кепилдик for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.
9. Колдоо
For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webсайтка же продукт сатылып алынган сатуучу аркылуу кардарларды тейлөө бөлүмүнө кайрылыңыз.
Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз Tyger Auto Store on Amazon.
