WYBOT Osprey 300II робот бассейн тазалоочу колдонмосу

Коопсуздук нускамалары

Read this manual carefully before operating the WYBOT Osprey 300II Robotic Pool Cleaner. Failure to follow instructions may result in damage or injury.

Жалпы коопсуздук

• Заряддоочу түзүлүштү туташтыруудан мурун, заряддоо портунун кургак экенин текшериңиз.
• Электр зымы же заряддагыч бузулган болсо, тазалагычты иштетпеңиз.
• Тазалоочу иштеп турганда балдарды жана үй жаныбарларын бассейн аймагынан алыс кармаңыз.
• Do not operate the cleaner if there are swimmers in the pool.
• Only use the original charger provided by WYBOT.

Батареянын коопсуздугу

• The cleaner contains a Lithium-Ion battery. Do not expose it to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the battery pack.
• Батареяны жергиликтүү эрежелерге ылайык жок кылыңыз.

Пакеттин мазмуну

Баардык буюмдар пакетте камтылганын текшериңиз:

• 1 x Cleaner Body
• 1 х заряддагыч
• 1 x User Manual
• 1 x Brush (pre-installed or optional)
• 1 x Floating Handle
• 1 x Swing Plate
• 1 x Ыкчам колдонмо

Image: Contents of the WYBOT Osprey 300II package, including the cleaner, charger, manuals, brush, floating handle, and swing plate.

Продукт бүттүview

The WYBOT Osprey 300II is a cordless robotic pool cleaner designed for efficient and autonomous pool maintenance.

Негизги өзгөчөлүктөрү:

• Узартылган иш убактысы: Up to 130 minutes with a 6600mAh battery.
• Күчтүү мотор күчү: 45W brushless motor for effective debris removal.
• Тез кубаттоо: Болжол менен 3 саатта толук заряддалат.
• Ар тараптуу колдонмо: Suitable for various pool types (above-ground, in-ground) and surfaces (PVC, tiles, vinyl, gunite), including slopes up to 15 degrees.
• Auto-Parking Technology: Automatically returns to the pool edge when battery is low.
• Өркүндөтүлгөн чыпкалоо системасы: Captures fine debris like sand, leaves, and pet hair.

Image: The WYBOT Osprey 300II Robotic Pool Cleaner, showcasing its sleek design and wheels.

Жайгашуу

1. Charging the Cleaner

1. Ensure the cleaner is dry before charging.
2. Locate the charging port on the top of the cleaner.
3. Connect the charger cable to the port and plug the charger into a power outlet.
4. The LED indicator on the charger will show red during charging and turn green when fully charged (approximately 3 hours).

Image: A person connecting the charger to the WYBOT Osprey 300II pool cleaner near a pool.

2. Attaching the Floating Handle (Optional)

The floating handle can be attached to the cleaner to assist with retrieval from the pool.

1. Tie the floating handle securely to the designated attachment point on the cleaner.
2. Adjust the length of the rope to ensure the handle floats on the surface of the water when the cleaner is at the deepest part of the pool.

3. Brush Installation (Optional)

The cleaner comes with brushes that can be installed on the bottom for enhanced cleaning performance, especially on rougher surfaces. For pools with uneven bottoms, it is recommended to test without brushes first to avoid obstruction.

1. Turn the cleaner upside down.
2. Align the brushes with the designated slots on the bottom of the cleaner.
3. Press firmly until the brushes snap into place.

Иштөө нускамалары

1. Placing the Cleaner in the Pool

1. Ensure the cleaner is fully charged and the charging port is securely closed.
2. Long press the power button on the cleaner to turn it on.
3. Gently lower the cleaner into the pool until it is fully submerged. Hold it underwater until all air bubbles escape.
4. Release the cleaner and allow it to sink to the bottom. Ensure it lands in an upright position.

Video: Demonstration of placing the WYBOT Osprey 300II pool cleaner into the water and its initial operation.

2. Тазалоо режимдери

The Osprey 300II operates automatically once activated. It features intelligent path planning to maximize cleaning coverage.

3. Auto-Parking Function

When the battery level is low, the cleaner will automatically move to the nearest pool edge for easy retrieval. The LED indicator will signal low battery status.

Image: The WYBOT Osprey 300II pool cleaner automatically returning to the edge of the pool, indicated by a 'P' symbol and a battery icon.

Техникалык тейлөө

1. Cleaning the Filter Basket

1. After each cleaning cycle, retrieve the cleaner from the pool.
2. Open the top cover of the cleaner to access the filter basket.
3. Чыпка себетти алып чыгып, чогулган таштандыларды бошотуңуз.
4. Rinse the filter basket thoroughly with a garden hose until clean.
5. Reinsert the clean filter basket and close the top cover securely.

Image: A person cleaning the filter basket of the WYBOT Osprey 300II with a garden hose, showing collected debris.

2. Жалпы кам көрүү

• Колдонулбаган учурда тазалагычты салкын, кургак жерде, күн нуру түз тийбеген жерде сактаңыз.
• Ensure the charging port is dry before storage.
• Regularly inspect the wheels and brushes for wear and tear.

Проблемаларды чечүү

If you encounter issues with your WYBOT Osprey 300II, refer to the following common solutions:

• Тазалоочу кыймылдабайт: Ensure the battery is fully charged and the power button is pressed. Check for any obstructions in the wheels or suction inlet.
• Начар тазалоо көрсөткүчтөрү: Clean the filter basket. Ensure brushes are properly installed if needed for your pool surface.
• Cleaner gets stuck: If your pool has uneven surfaces or obstacles, consider removing the brushes or manually guiding the cleaner initially.
• LED көрсөткүч иштебей жатат: Contact customer support if the LED indicator does not function as described after charging or during operation.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official WYBOT webсайт.