Introduction
This manual provides comprehensive instructions for the safe and effective operation of your TOPPING HYNOTONE CabScreamer60 60W Power Amp Pedal. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Image: The CabScreamer60 Power Amp Pedal, a compact black unit with control knobs and input/output jacks.
Коопсуздук маалыматы
- Бул аппаратты жамгырга же нымга тийгизбеңиз.
- в ачпагылаasinг. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Use only power supplies specified in this manual. Incorrect voltagал түзмөккө зыян келтириши мүмкүн.
- Аппаратты жылуулук булактарынын жанына же тике күн нуруна коюудан алыс болуңуз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн туура желдетүүнү камсыз кылыңыз.
Продукт бүттүview
The HYNOTONE CabScreamer60 is a 60W power amplifier pedal designed for guitarists and musicians seeking a portable and versatile amplification solution. It features Presence and Resonance controls to emulate tube amp characteristics, a balanced line out for recording, and a 9V DC output for powering other pedals.
Башкаруу каражаттары жана порттор
Image: Diagram illustrating the various inputs, outputs, and controls on the CabScreamer60 pedal, including Power Switch, Power PD 9-20V, DC9V Out, Speaker Out, Line Out, Input, Level, Resonance, and Presence knobs.
- Кубат которгучу: Түзмөктү күйгүзөт/өчүрөт.
- Power PD 9-20V: USB-C input for power delivery (PD) from 9V to 20V.
- DC9V Out: 9V DC output (up to 200mA) for powering external pedals.
- Баяндамачы: 6.35mm TS output for connecting to a speaker cabinet.
- Чыгуу: 6.35mm TRS balanced line output for recording or connecting to a mixer/interface.
- Киргизүү: 6.35mm TS input for connecting your instrument or preamp.
- Деңгээл: Жалпы чыгаруу көлөмүн тууралайт.
- Резонанс: Controls the low-frequency response, mimicking tube amp өзгөчөлүктөрү.
- Болушу: Controls the high-frequency response, mimicking tube amp өзгөчөлүктөрү.
Жайгашуу
Power Connection
The CabScreamer60 is powered via its PD input (USB-C), accepting 9-20V. For optimal performance and portability, a mobile power bank or a 65W-100W USB-C power brick is recommended. This eliminates ground loop interference and allows for outdoor use.
Image: Close-up of the CabScreamer60's rear panel, highlighting the USB-C PD power input and the DC9V output jack.
Connecting Your Signal Chain
- Connect your instrument or the output of your preamp/pedalboard to the Киргизүү jack of the CabScreamer60.
- If powering other pedals, connect them to the DC9V Out jack (ensure total current draw does not exceed 200mA).
- туташтыруу Speaker Out jack to your speaker cabinet using a 6.35mm TS cable.
- For recording or connecting to a mixer/audio interface, use a 6.35mm TRS cable from the Line Out джек.
Image: The CabScreamer60 pedal connected via its Line Out to an audio interface, demonstrating a typical recording setup.
Иштөө нускамалары
Adjusting Tone with Resonance and Presence
The Resonance and Presence controls are designed to mimic the characteristics of a tube power amplifier, allowing for precise tonal shaping.
Image: Close-up of the CabScreamer60's control knobs, specifically highlighting the Resonance and Presence controls and their function in mimicking tube amp тондор.
- Резонанс: Adjusts the low-frequency response. Turning it clockwise increases the low-end fullness and depth.
- Болушу: Adjusts the high-frequency response. Turning it clockwise increases clarity and brightness.
These controls offer a gain and attenuation range of 12dB each. The 12 o'clock position acts as a bypass, providing a neutral setting. Experiment with these controls to achieve your desired sound.
Сүрөт: деталдуу view of the CabScreamer60's control knobs, emphasizing the range and bypass function of the frequency controls.
Үндү тууралоо
колдонуу Деңгээл knob to set the overall output volume of the amplifier. Start with a low setting and gradually increase to a comfortable listening level.
Connectivity and Usage Scenarios
- Жаздыруу: The balanced Line Out interface allows for real-time recording by routing the audio signal directly to an audio interface, ensuring clear capture of your performance.
- External Pedals: The 9V DC output provides power to external pedals, simplifying your setup by reducing the need for additional power supplies.
- Жандуу аткаруу: The Line Out can be connected via a TS cable to drive additional enclosures from a second power amplifier pedal. For personal monitoring, it can be connected to an infrared charger.
- Портативдик колдонуу: With PD power input, the CabScreamer60 can be powered by a mobile power bank, making it suitable for outdoor performances or locations without AC power.
Техникалык тейлөө
- Түзмөктү жумшак, кургак чүпүрөк менен тазалаңыз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Keep the unit free from dust and debris, especially around the input/output jacks and ventilation areas.
- Педалды колдонбогондо салкын, кургак жерде сактаңыз.
Проблемаларды чечүү
- Түзмөк күйбөйт: Ensure the USB-C power cable is securely connected to the PD input and that your power source (e.g., power brick, power bank) is functioning correctly and providing sufficient wattage (65W-100W recommended). Try unplugging and re-plugging the power cable.
- Үн чыгышы жок: Check all cable connections (input, speaker out, line out). Verify that the Level knob is not set to minimum. Ensure your instrument and speaker cabinet are functioning.
- Humming or noise: Ensure all cables are properly shielded. If using a power bank, it can help eliminate ground hum. Check for interference from other electronic devices.
- External pedals not powering on: Verify that the total current draw of connected pedals does not exceed 200mA from the DC9V Out. Check pedal power requirements.
Техникалык шарттар
Image: A diagram presenting the detailed technical specifications of the CabScreamer60, including dimensions, weight, input/output types, impedance, and power ratings.
| Өзгөчөлүк | Деталь |
|---|---|
| Өлчөмдөр | 120mm * 124mm * 56mm (2.2"D x 4.7"W x 4.9"H) |
| Салмагы | 470 г (1.2 фунт) |
| Киргизүү | 6.35 мм TS |
| Киргизүү импедансы | 100K Ом |
| Speaker Out | 6.35 мм TS |
| Line Out | 6.35 мм TRS |
| Line Out Impedance | 200 Ом |
| Power Input | Type C (PD 15V / 5A recommended, supports 9-20V) |
| Power Output (DC9V) | DC 9V / 200mA (DC 5.5mm*2.1mm, center-negative) |
| Күч Amp Чыгуу | 60W (@1% THD, 4 Ohm) |
| Материалдын түрү | Эритме болот |
| Каналдардын саны | 2 |
Кепилдик жана колдоо
For warranty information and technical support, please refer to the official TOPPING webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
