Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit User Manual

1. Киришүү

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• Электр коркунучу: The PSU contains high voltage components. Do not open the PSU casinг. Ичинде колдонуучу тейлей турган бөлүктөр жок.
• Кесиптик орнотуу: Installation should be performed by a qualified technician or experienced user.
• Вентиляция: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• Курчап турган чөйрө: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• Негиздөө: Always connect the PSU to a grounded power outlet using the provided power cable.
• Өчүрүү: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• AC кубат кабели
• Монтаждоо бурамалар
• Колдонуучунун Колдонмосу (бул документ)

4. Орнотуу жана орнотуу

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. Системаңызды даярдаңыз: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. Эски PSUну алып салуу (эгер бар болсо): Disconnect all cables from your old PSU and remove it from the case.
3. Жаңы PSUну орнотуу: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   Сүрөт: Негизги view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. Энелик платанын кубаттуулугун туташтыруу: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. CPU кубатын туташтыруу: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. PCIe кубаттуулугун туташтырыңыз: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. Кабелдик башкаруу: Organize cables neatly to ensure proper airflow and a tidy build.
9. Корпусту жаап, AC кубатын туташтырыңыз: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   Сүрөт: Арткы view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. Иштөө нускамалары

Once the PSU is installed and all connections are secure:

1. Күйгүзүү: Кубат блогунун арткы жагындагы кубат которгучун "ON" абалына коюңуз.
2. Тутумду баштоо: Системаны баштоо үчүн компьютериңиздин корпусундагы кубат баскычын басыңыз.
3. Тынч иштөө: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин электр энергияңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылууга жардам берет:

• Чаңды тазалоо: Кубат берүүчү түзүлүштүн желдеткич жана желдетүү торчолорунан мезгил-мезгили менен кысылган абаны колдонуп чаңды тазалап туруңуз. Тазалоодон мурун системанын өчүрүлгөнүн жана розеткадан суурулганын текшериңиз.
• Кабель текшерүү: Occasionally check that all power cables are securely connected and not obstructing airflow.
• Stabil Voltage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. Кыйынчылыктарды

If you encounter issues with your PSU, consider the following:

• Кубат жок:
  • AC кубат кабелинин кубат булагына жана розеткага бекем туташтырылганын текшериңиз.
  • PSU артындагы кубат которгучу "ON" абалында экенин текшериңиз.
  • Розетканы башка түзмөккө сайып текшериңиз.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• Системанын туруксуздугу/бузуулар:
  • Системаңыздын кубаттуулук талаптары PSUнун 850 Вт кубаттуулугунан ашпасын текшериңиз.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• адаттан тыш ызы-чуу:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webсайт.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webсайт:

www.sharkoon.com