MELOKEA F064 Ergonomic Office Chair User Manual

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your MELOKEA F064 Ergonomic Office Chair. Designed for comfort and durability, this chair supports up to 200kg (440LBS) and features an extra-wide seat, high back, and adjustable lumbar support. Please read this manual thoroughly before use to ensure proper setup and to maximize the lifespan of your chair.

1. Орнотуу колдонмосу

The MELOKEA F064 chair is designed for straightforward assembly. All necessary tools and detailed instructions are included in the packaging. Please follow these steps carefully.

1.1 Таңгактан чыгаруу жана инвентаризация

Carefully remove all components from the packaging. Verify that all parts listed in the included parts list are present and undamaged. Lay out all components on a clean, flat surface to facilitate assembly.

1.2 Чогултуу кадамдары

1. Дөңгөлөктөрдү базага тиркөө: Insert the five PU casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Газ лифтин киргизүү: Place the gas lift cylinder into the center hole of the chair base. Ensure it is seated securely.
3. Отургуч механизмин чогултуу: Берилген бурамалар менен отургучтун механизмин отургуч жаздыкчасынын астыңкы бетине бекитиңиз. Механизмдин алдыңкы бети отургучтун алдыңкы бети менен бир сызыкта экенин текшериңиз.
4. Аркасын отургучка туташтыруу: Secure the backrest to the seat mechanism using the designated screws. Do not overtighten until all screws are in place.
5. Колтуктарды бекитүү: Fasten the armrests to both the seat and backrest using the appropriate screws.
6. Чогултулган үстүнкү катмарды газ лифтине коюңуз: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism aligns with the top of the gas lift. Press down firmly to secure.

Figure 1: Fully assembled MELOKEA F064 Ergonomic Office Chair.

2. Иштөө нускамалары

Your MELOKEA F064 chair offers several adjustment features to customize your seating experience for optimal comfort and ergonomic support.

2.1 отургучтун бийиктигин жөндөө

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at your desired height to lock it in place.

2.2 Recline and Tilt Function

The chair features a versatile recline locking system, allowing you to adjust and lock the backrest at any angle between 90° and 130°. Locate the tilt function switch (often a lever or knob) on the left side, beneath the seat. Pull the lever out to enable tilt, and push it in to lock the backrest at your preferred angle. The resistance of the tilt can also be adjusted by turning a tension knob, typically located at the front underside of the seat mechanism.

Figure 2: Key adjustable features and components of the MELOKEA F064 chair.

Figure 3: Recline angles for various activities (90° to 130°).

2.3 Height-Adjustable Lumbar Support

The innovative lumbar support can be adjusted vertically by 2cm to align with the natural curve of your spine. To adjust, gently push the lumbar support pad up or down to your desired position. This helps relieve lumbar pressure during long hours of sitting.

2.4 Колдукту тууралоо

The armrests are designed to provide comfortable support. While the product description mentions adjustable armrests, specific adjustment mechanisms (e.g., height, pivot) are not detailed. Typically, armrests can be adjusted by pressing a button on the side or underside of the armrest and moving them up or down. Release the button to lock.

3. Кароо жана тейлөө

Proper care and maintenance will extend the life and appearance of your MELOKEA F064 office chair.

• үзгүлтүксүз тазалоо: Dust the chair regularly with a soft, dry cloth. For mesh and fabric surfaces, use a vacuum cleaner with a brush attachment to remove dust and debris.
• Тазалоо: For spills or stains on the fabric seat, use a mild soap solution and a damp cloth. Blot the area gently; do not rub vigorously. Allow to air dry completely. Avoid harsh chemicals or abrasive cleaners.
• Кастерге тейлөө: Periodically check the casters for accumulated hair or debris. Clean them to ensure smooth rolling and prevent damage to your flooring.
• Аппараттык камсыздоону текшерүү: Every few months, inspect all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
• Түздөн-түз күндүн нурунан качуу: Prolonged exposure to direct sunlight can fade fabric and degrade plastic components. Position your chair away from direct sunlight when possible.

4. Кыйынчылыктарды

If you encounter any issues with your MELOKEA F064 chair, refer to the common problems and solutions below.

If you experience a problem not listed here or if the suggested solutions do not resolve the issue, please contact MELOKEA customer support for assistance.

5. Продукттун спецификациялары

Figure 4: Detailed dimensions of the MELOKEA F064 chair.

6. Кепилдик жана колдоо

MELOKEA stands behind the quality of its products. Your MELOKEA F064 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.

6.1 Кепилдик маалыматы

The MELOKEA F064 chair includes a 3 жылдык кепилдик. This warranty covers manufacturing defects and provides for free replacement gas lifts if needed. Please retain your proof of purchase for warranty claims.

6.2 Кардарларды тейлөө

For any inquiries, concerns, or warranty claims regarding your product, please reach out to MELOKEA customer service. Refer to the original packaging or the MELOKEA official webакыркы байланыш маалыматы үчүн сайт.

You can also visit the official MELOKEA store on Amazon for more information and support: MELOKEA Store