Introduction
This manual provides essential instructions for the safe and efficient operation of your Renogy 24V 10A AC-to-DC LFP Portable Battery Charger. Please read this manual thoroughly before use and retain it for future reference. This charger is specifically designed for 24V Lithium-Iron Phosphate (LiFePO4) batteries.

Image: The Renogy 24V 10A AC-to-DC LFP Portable Battery Charger with its cables.
Коопсуздук нускамалары
Adhering to these safety guidelines is crucial for preventing injury and damage to the charger or battery.
- This charger is exclusively designed for 24V Lithium-Iron Phosphate (LiFePO4) batteries. Do not attempt to charge other battery types.
- Ensure the charger is connected to a grounded AC outlet within the specified voltage range (100-240V AC, 50/60Hz).
- Чыгуу терминалдарын кыска туташуудан сактаңыз.
- Заряддоочу түзүлүштү жамгырга, нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
- Заряддоо түзүлүштү жакшы желдетилген жерде иштетиңиз.
- If the charger's positive and negative output terminals are accidentally reversed, the built-in blade fuse will burn out to protect the charger. Replace the fuse with one of the same rating (15A) if this occurs.
- The charger includes multiple safety protections: short-circuit, over-current, over-temperature, over-voltage, томдун астындаtage, жана тескери полярдуулукту коргоо.

Image: Diagram illustrating the multi-layer safety protections of the charger, including short circuit, over-current, over-temperature, over-voltage, томдун астындаtage, жана тескери полярдуулукту коргоо.
Продукт бүттүview жана өзгөчөлүктөрү
The Renogy 24V 10A AC-to-DC LFP Portable Battery Charger is designed for efficient and safe charging of lithium-iron phosphate batteries. Key features include:
- Lithium Battery Specific Design: Tailored for LiFePO4 batteries, including a lithium activation function to wake up batteries from BMS protection.
- Wide AC Input: Compatible with 100-240V AC, 50/60Hz power sources.
- Smart 3-Stage Заряддоо: Utilizes Constant Current (CC), Constant Voltage (CV), and Trickle charging stages for optimized battery health and efficiency up to 92%.
- Тынч операция: Fanless design ensures zero-noise charging and efficient heat dissipation.
- Plug-and-Play: Simple connection for user-friendly operation.

Image: The Renogy charger highlighting its compatibility with 24V lithium batteries, showing both ring terminal and alligator clip connection options. Charging voltage is 28.8V and current is ≤10A.

Image: The Renogy charger emphasizing its fanless design for silent operation and efficient heat dissipation, indicated by a 0dB icon.
Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- Батарея заряддагыч: Main unit (Dimensions: 9.17 x 4.25 x 2.52 inches / 233 x 108 x 6.4 mm).
- AC Charger Power Adapter Cable: For connecting to a wall outlet (Length: 47.24 inches / 1200 mm, 18AWG).
- Alligator Clips Cable: For temporary battery connections (Length: 23.32 inches / 600 mm, 14AWG).
- Ring Terminal Cable: For permanent or semi-permanent battery connections (Length: 23.62 inches / 600 mm, 14AWG).
- Blade Automotive Fuse Holder: Integrated into the output cable (15A).
- Blade Fuse: Spare fuse (15A).

Image: An exploded diagram showing the Renogy battery charger and its components: the main charger unit, AC power adapter cable, alligator clips cable, ring terminal cable, blade automotive fuse holder, and a spare blade fuse.
Орнотуу жана туташуу
Follow these steps to connect your charger:
- Туташуу ыкмасын тандаңыз: Select either the alligator clips cable for temporary connections or the ring terminal cable for more secure, long-term installations.
- Батареяга туташуу:
- туташтыруу кызыл (+) terminal of the chosen cable to the оң (+) terminal of your 24V LiFePO4 battery.
- туташтыруу кара (-) terminal of the chosen cable to the терс (-) terminal of your 24V LiFePO4 battery.
- Туташуулардын коопсуз экенин текшериңиз.
- Электр тогуна туташуу: Plug the AC charger power adapter cable into the charger, then plug the other end into a standard 100-240V AC wall outlet.
- Заряддоочу автоматтык түрдө заряддоо процессин баштайт.
Операция
The charger features a 3-stage charging process and indicator lights to show the charging status.
Заряддоо Сtages and Indicator Lights:
- Fast High-Current Charging (CC - Constant Current): The charger provides a maximum charging current of 10A. The indicator light will be катуу кызыл, indicating active charging.
- Constant Voltage Charging (CV): Батарейканын көлөмү катарыtage approaches full, the charging current will gradually decrease. The indicator light remains катуу кызыл, indicating active charging.
- Түшкү заряддоо: When the battery is nearly full, the charging current will drop below 1A. The indicator light will turn жашыл, indicating that the battery is fully charged.
Lithium Battery Activation Function:
This charger can activate a lithium battery that has entered BMS (Battery Management System) protection mode due to low voltage or other conditions. Simply connect the charger to the battery and AC power; the charger will attempt to reactivate the battery and resume normal charging.

Image: A diagram showing the Renogy charger connected to a LiFePO4 battery, illustrating fast charging (25Ah battery fully charged in 2.5 hours) and the indicator light states: red for charging, green for fully charged.
Техникалык тейлөө
Туура техникалык тейлөө кубаттагычыңыздын узак мөөнөттүү иштешин жана иштешин камсыз кылат:
- Заряддоочу түзүлүштү чаңдан жана калдыктардан таза жана таза кармаңыз. Тазалоо үчүн кургак, жумшак чүпүрөктү колдонуңуз.
- Regularly inspect cables and connectors for any signs of damage or wear. Replace damaged components immediately.
- Заряддоо түзүлүштү колдонбогондо салкын, кургак жерде сактаңыз.
- Ensure proper ventilation around the charger during operation to facilitate heat dissipation.
Проблемаларды чечүү
Эгер заряддагычыңыз менен көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Заряддоочу түзүлүштүн индикатору өчүк. | No AC power, faulty connection, or internal issue. | Check AC power outlet and cable connections. Ensure the charger is securely plugged in. |
| Charger not charging (red light not on). | Battery not connected correctly, battery in BMS protection, or reverse polarity. | Verify battery connections (positive to positive, negative to negative). The charger has a lithium activation function; ensure the battery is not severely damaged. Check the blade fuse for reverse polarity protection. |
| Charger light is green but battery is not fully charged. | Incorrect battery type or battery fault. | Ensure you are charging a 24V LiFePO4 battery. If the issue persists, the battery may be faulty. |
| Заряддоочу түзүлүш өтө ысып кетет. | Poor ventilation or internal fault. | Ensure the charger is in a well-ventilated area. If overheating continues, discontinue use and contact support. |
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | RBC10A2P |
| Киргизүү көлөмүtage | 100-240V AC, 50/60Hz |
| Output Voltage | 24V DC |
| Заряддоо агымы | 10A |
| Заряддоо Voltage (Макс) | 28.8V |
| Натыйжалуулук | 92% чейин |
| Продукциянын өлчөмдөрү | 9.17 x 4.25 x 2.52 дюйм (233 x 108 x 6.4 мм) |
| Элемент Салмагы | 5 фунт |
| UPC | 840315237667 |
Кепилдик жана колдоо
For detailed warranty information and customer support, please refer to the official Renogy website or contact Renogy customer service directly. This manual does not contain specific warranty terms.





