1. Киришүү
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HEATIT HISD-F Electric Pipe Freeze Protection Heating Cable. Please read all instructions carefully before use and retain this manual for future reference.
Image 1.1: HEATIT HISD-F Electric Pipe Freeze Protection Heating Cable with included tape and a pipe valve.
2. Коопсуздук маалыматы
Your safety is paramount. Adhere to all warnings and instructions to prevent electric shock, fire, or injury.
- Тастыктоо: Ensure the heating cable is fully CSA and ETL certified from end to end for superior safety and compliance with industry standards. A UL-certified plug alone is not sufficient for complete protection.
- Water Pipes Only: This heating cable is designed for water pipes that are always filled with water. It is not suitable for empty water pipes, fuel lines, hoses, gutters, or steam lines.
- Өзгөртүүлөр жок: Do not alter or cut the heating cable length under any circumstances.
- Орнотуу: Install the heating cable along the pipe in a straight line. Avoid touching, crossing, or overlapping the heating cable at any point.
- Изоляция: Use fiberglass insulation over the heating cable for additional protection in lower temperatures.
- Негиздөө: The cable features a tinned copper wire grounding shield for enhanced user safety.
- Суу өткөрбөйт: The cable is IP67-rated, offering waterproof and dustproof protection.
Image 2.1: Importance of full CSA & ETL certification for heating cables.
3. Продукциянын өзгөчөлүктөрү
- CSA & ETL Certified: Ensures compliance with strict North American safety standards.
- Reliable Freeze Protection: Operates effectively at temperatures as low as -40°F (-40°C) to prevent freezing in metal or plastic pipes.
- Температураны автоматтык башкаруу: Built-in thermostat activates below 37°F (3°C) and deactivates above 50°F (10°C), conserving energy.
- Туруктуу жана суу өткөрбөйт: Constructed with a PVC shell, nickel-chromium alloy heating wire, and IP67 rating for durability and resistance to water, dust, and flame. Withstands temperatures up to 194°F (90°C).
- Натыйжалуу дизайн: Features double-conducting, double-heating design with high-performance XLPE insulation and a tinned copper wire grounding shield.
- Increased Width: Upgraded 0.49-inch width (from 0.32-inch) for increased contact area with the pipe, enhancing protection.
Image 3.1: Key features of the HEATIT heating cable.
4. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- HEATIT HISD-F Electric Pipe Freeze Protection Heating Cable (14 Feet)
- 3-foot power cord with UL certified plug
- Камтылган термостат
- 35 feet of aluminum foil fiberglass tape
- Колдонуучунун Колдонмосу (бул документ)
5. Орнотуу жана орнотуу
Follow these steps for proper installation of your heating cable.
5.1. Даярдоо
- Ensure the pipe is clean and dry before installation.
- Uncoil the heating cable completely to prevent it from touching or overlapping itself.
- Temporarily plug in the cable to confirm it heats up. You should feel a slight warmth.
- Unplug the cable before proceeding with installation.
5.2. Attaching the Cable to the Pipe
- Position the heating cable along the underside of the pipe.
- Use the provided aluminum foil fiberglass tape to secure the cable to the pipe at regular intervals (approximately every 12 inches). Ensure the thermostat, splice, and end seal are firmly against the pipe.
- Маанилүү: The heating cable must be installed in a straight line along the pipe. Do not spiral, cross, or overlap the cable, as this can lead to overheating and damage.
Image 5.1: Initial steps for preparing the heating cable.
Image 5.2: Visual guide for securing the heating cable and thermostat to the pipe.
5.3. Applying Insulation
- After securing the heating cable, apply appropriate pipe insulation (e.g., foam tubing or fiberglass insulation) over the pipe and the heating cable. This helps to retain heat and improve energy efficiency.
- Ensure the insulation covers the entire length of the heated pipe section, including the thermostat and end seal.
6. Иштөө нускамалары
The HEATIT HISD-F heating cable features an automatic thermostat for convenient and energy-efficient operation.
- Once installed and insulated, plug the heating cable into a standard 120V AC grounded outlet.
- The built-in thermostat will automatically activate the heating element when the ambient temperature drops below 37°F (3°C).
- The heating element will automatically shut off when the ambient temperature rises above 50°F (10°C).
- This automatic control ensures your pipes are protected from freezing only when necessary, optimizing energy consumption.
Image 6.1: Automatic temperature control mechanism.
Image 6.2: Visual representation of the thermostat's activation and deactivation points.
7. Техникалык тейлөө
Regular inspection and simple maintenance can extend the life of your heating cable.
- Сезондук текшерүү: Before the cold season begins, inspect the entire length of the heating cable and its insulation for any signs of damage, wear, or exposure.
- Изоляциянын бүтүндүгү: Ensure the pipe insulation remains intact and securely covers the heating cable. Repair or replace any damaged insulation.
- Электр шнур жана сайгыч: Check the power cord and plug for cuts, fraying, or damage. Do not use if damaged.
- Тазалык: Keep the area around the heated pipe free from debris or obstructions that could interfere with heat dissipation or damage the cable.
8. Кыйынчылыктарды
If your HEATIT heating cable is not functioning as expected, consider the following:
- Жылуулук жок:
- Verify the cable is securely plugged into a functional 120V AC grounded outlet.
- Розетка үчүн автоматтык өчүргүчтү текшериңиз.
- Ensure the ambient temperature is below 37°F (3°C) for the thermostat to activate.
- Кабелдин көрүнгөн бузулууларын текшериңиз.
- Ашыкча ысып кетүү:
- Ensure the cable is not crossed or overlapped at any point.
- Confirm the pipe is always filled with water.
- Verify the ambient temperature is below 50°F (10°C).
If issues persist after performing these checks, consult a qualified electrician or contact HEATIT customer support.
9. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Модель номери | HISD-F |
| Узундук | 14 Фут |
| Материал | HISD-F |
| Сертификаттар | CSA, ETL (full cable), UL (plug) |
| Иштөө температурасы диапазону | Down to -40°F (-40°C) |
| Thermostat Activation | Activates below 37°F (3°C), shuts off above 50°F (10°C) |
| Суу өткөрбөйт рейтинги | IP67 |
| Max Withstand Temperature | 194°F (90°C) |
| Элемент Салмагы | 1.31 фунт |
| Пакеттин өлчөмдөрү | 8.07 x 7.87 x 2.48 дюйм |
10. Кепилдик жана колдоо
HEATIT is committed to providing high-quality products. This heating cable is backed by a $2 million liability insurance policy, ensuring quality, safety, and peace of mind.
- Transparency Program: This product is part of the Transparency Program, allowing you to authenticate its genuineness via a unique code.
- For any questions, technical support, or warranty claims, please refer to the contact information provided on the product packaging or the official HEATIT webсайт.
Image 10.1: HEATIT's commitment to quality and safety through certifications and insurance.
