Introduction
This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your Dasqua 8400-0020 Digital Levelling Box. Please read this manual thoroughly before using the device to ensure proper handling and to prevent damage or injury.
Коопсуздук нускамалары
Жалпы коопсуздук чаралары:
- Always handle the device with care to avoid dropping or impact, which can affect its accuracy.
- Keep the device away from strong magnetic fields, except for its integrated magnet, to prevent interference with internal components.
- Аппаратты экстремалдык температурага, нымдуулукка же түз күн нуруна калтырбаңыз.
- Аппаратты жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Бул түзмөк суу өткөрбөйт. Суюктуктарга тийгизбеңиз.
- Балдар жетпеген жерде сактаңыз.
Продукт бүттүview
The Dasqua 8400-0020 is a compact digital levelling box designed for precise angle measurements. It features a clear digital display, intuitive controls, and a magnetic base for secure attachment to ferrous surfaces.
Компоненттер жана башкаруу элементтери
Figure 1: Dasqua 8400-0020 Digital Levelling Box. This image shows the front face of the device, highlighting the digital display, control buttons, and a warning label for the magnetic base.
- 1. Санарип дисплей: Shows angle readings in degrees, absolute (ABS) or relative (REF) mode, and battery indicator.
- 2. ON/OFF REF Button: Powers the unit on or off. Also used to set a relative zero point (REF).
- 3. MODE Button: Switches between absolute (ABS) and relative (REF) measurement modes.
- 4. HOLD Button: Дисплейдеги учурдагы окууну токтотот.
- 5. Magnetic Base: Located on the bottom of the unit, allows for secure attachment to metal surfaces for hands-free operation.
Жайгашуу
Before first use, ensure the device has sufficient power. The Dasqua 8400-0020 typically uses standard AAA batteries. Open the battery compartment, insert batteries with correct polarity, and close the compartment securely.
Батарея орнотуу:
- Locate the battery compartment cover on the back or side of the unit.
- Капкакты ачыңыз.
- Insert [Number] AAA batteries (not included) observing the correct polarity (+/-).
- Батарея уясынын капкагын бекем жабыңыз.
Note: The exact battery type and quantity should be confirmed from the product packaging or device itself.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү:
басыңыз ON/OFF REF button to turn the device on. Press and hold the ON/OFF REF өчүрүү үчүн баскычын бир нече секунд басып туруңуз.
2. Absolute Measurement (ABS Mode):
When the device is powered on, it typically defaults to Absolute (ABS) mode. In this mode, the display shows the angle relative to a true horizontal (0°) or vertical (90°) plane. The "ABS" indicator will be visible on the display.
3. Relative Measurement (REF Mode):
To measure an angle relative to a specific surface (e.g., to find the difference between two angles), use the Relative (REF) mode:
- Place the device on the first surface you wish to set as your reference.
- басыңыз ON/OFF REF button briefly. The display will show "0.00°" and the "REF" indicator will appear, indicating that this position is now your zero reference.
- Move the device to the second surface. The display will now show the angle difference between the first and second surfaces.
- To exit REF mode and return to ABS mode, press the РЕЖИМ баскычы.
4. кармап туруу функциясы:
басыңыз БЕРҮҮ button to freeze the current reading on the display. This is useful when taking measurements in hard-to-see areas. Press the БЕРҮҮ көрсөткүчтү чыгаруу жана өлчөөнү улантуу үчүн баскычты кайра басыңыз.
5. Calibration (Self-Calibration):
For optimal accuracy, it is recommended to perform a self-calibration periodically or if you suspect the readings are inaccurate. Refer to the device's specific instructions for calibration, which usually involves placing the unit on a flat, level surface and following a sequence of button presses.
Note: Consult the manufacturer's full instructions for detailed calibration procedures if available.
Техникалык тейлөө
Тазалоо:
Wipe the device with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents. Ensure no dust or debris accumulates around the display or buttons.
Сактагыч:
When not in use, store the digital levelling box in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the device.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Батареялар аз же түгөндү. Батареянын полярдуулугу туура эмес. | Replace batteries with new ones. Ensure batteries are inserted with correct polarity. |
| Туура эмес окуулар. | Device not calibrated. Device exposed to strong magnetic fields (other than its base magnet). Physical damage. | Perform self-calibration. Move device away from other magnetic sources. Inspect for damage; if damaged, contact support. |
| Дисплей күңүрт же бүлбүлдөп турат. | Батареянын кубаттуулугу төмөн. | Батареяларды алмаштырыңыз. |
| Баскычтар жооп бербейт. | Device frozen. Low battery. | Remove and reinsert batteries to reset. Replace batteries. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 8400-0020 |
| Бренд | Dasqua |
| Өлчөө диапазону | 90° x 4 (360°) |
| Резолюция | 0.1° |
| Продукциянын өлчөмдөрү | 13.3 x 12.5 x 5.5 см |
| Салмагы | 140 г |
| Өзгөчөлүктөрү | Digital display, Magnetic base, ABS/REF mode, Hold function |
Кепилдик жана колдоо
For warranty information and technical support, please contact Dasqua customer service or refer to the official Dasqua webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Manufacturer: Dasqua
