Dyeetic 6000A Portable Car Jump Starter and Power Bank User Manual

1. Киришүү

Thank you for choosing the Dyeetic 6000A Portable Car Jump Starter. This device is designed to provide reliable power for jump-starting 12V vehicles, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Коопсуздук чаралары

Always observe the following safety guidelines to prevent injury or damage to the device and your vehicle:

• Read all instructions carefully before using the jump starter.
• Туура полярдуулукту камсыз кылыңыз (кызыл түстөгүamp оң, кара клamp to negative) to avoid sparks or damage.
• Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter (All Gas and 10.0L Diesel).
• Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
• Аппаратты балдардан алыс кармаңыз.
• Аппаратты экстремалдык температурага, түз күндүн нуруна же сууга калтырбаңыз.
• Ensure the device has at least 50% battery charge before use for optimal performance.
• The device features 10-in-1 smart protection, including over-current, reverse polarity, short-circuit, and over-voltage коргоо.

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• Dyeetic 6000A Portable Car Jump Starter
• Smart Jumper Cables with Force Start button
• USB-C заряддоо кабели
• User Manual
• Durable EVA Carrying Case

4. Продукт бүтүп калдыview

The Dyeetic 6000A Jump Starter is a versatile device with multiple functionalities:

• Күчтүү секирүүчү стартер: Delivers 6000A peak current to start 12V vehicles, including all gas and up to 10.0L diesel engines.
• Portable Power Bank: Equipped with a 26800mAh battery and dual USB ports (including Quick Charge 3.0) for charging phones, tablets, and other devices.
• Шашылыш кол чырак: Features a built-in 600-lumen LED light with Flashlight, SOS, and Strobe modes.
• Өркүндөтүлгөн коопсуздук: Incorporates 10-in-1 smart protection for safe operation.
• Узак күтүү убактысы: Can hold its charge for up to 24 months.

5. Орнотуу: Баштапкы кубаттоо

Before first use, fully charge your Dyeetic 6000A Jump Starter. Use the provided USB-C charging cable and connect it to a compatible USB wall adapter (not included). The digital display will show the charging progress. A full charge is indicated when the display shows 100%.

6. Иштөө нускамалары

6.1. Унааны тез от алдырыңыз

1. Jumper кабелдерин туташтыруу: Insert the blue plug of the smart jumper cables into the jump starter's EC5 port. Ensure a secure connection.
2. ClampБатареяга: Кызыл позитивдүү (+) клды туташтырыңызamp to the positive terminal of your vehicle's battery. Connect the black negative (-) clamp унааңыздын аккумуляторунун терс терминалына.
3. Индикатор жарыгын текшерүү: The indicator light on the smart jumper cable will turn solid green if the connection is correct. If it shows red or flashes, check your connections for proper polarity. If no light, press the 'BOOST' button on the smart cable for 3 seconds to enter forced start mode (use with caution).
4. Унаа баштоо: Once the green light is solid, start your vehicle's engine within 45 seconds. If the engine does not start, wait at least 1 minute before attempting again. Do not crank for more than 3 seconds per attempt.
5. Clamps: After the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect them from the jump starter.

Video: How to Jump Start a Car with NEXPOW Jump Starter

Video 1: This video demonstrates the step-by-step process of using a portable jump starter to start a vehicle, including connecting the clamps and initiating the start sequence.

6.2. Көчмө кубат банкы катары колдонуу

The Dyeetic 6000A can charge various electronic devices:

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-A 5V/9V/12V QC3.0 or USB-A 5V/2.4A).
• Секирип баштоочу түзмөгүңүздү автоматтык түрдө кубаттай баштайт.
• Санарип дисплей батареянын калган пайызын көрсөтөтtagсекирүү стартер.

6.3. Operating the LED Emergency Flashlight

The built-in 600-lumen LED flashlight has three modes:

1. Кол чырак режими: Фонарьды күйгүзүү үчүн кубат баскычын 3 секунд басып туруңуз.
2. SOS режими: With the flashlight on, press the power button once to switch to SOS signal mode.
3. Strobe режими: Press the power button again to activate the strobe light mode.
4. Өчүрүү: Press the power button a third time to turn off the flashlight.

7. Техникалык тейлөө

To ensure the longevity and performance of your jump starter:

• Үзгүлтүксүз заряддоо: Батареянын иштөө мөөнөтүн сактоо үчүн, колдонулбаса дагы, түзмөктү ар бир 3-6 ай сайын кубаттап туруңуз.
• Сактагыч: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The EVA carrying case provides excellent protection.
• Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
• Кабельге кам көрүү: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

The Dyeetic 6000A Portable Car Jump Starter comes with a 36-month hassle-free return policy and lifetime technical support. For any questions, concerns, or technical assistance, please contact our dedicated customer service team. Refer to the contact information provided in your product packaging or visit the official Dyeetic webколдоо үчүн сайт.