BitFenix ​​CETO Basic High Airflow компьютердик оюн корпусу үчүн колдонуучу колдонмосу

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix CETO Basic High Airflow PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

The BitFenix CETO Basic is designed for high airflow and features panoramic tempered glass, three pre-installed Infinity Mirroring ARGB fans (two reverse, one positive), and extensive compatibility for modern PC components.

Пакеттин мазмуну

Орнотууну улантуудан мурун бардык компоненттердин бар экендигин текшериңиз:

• BitFenix CETO Basic PC Gaming Case
• 3 x 120mm Infinity Mirroring ARGB Fans (2x Reverse, 1x Positive)
• 1 x 8+8 Pin ARGB/Fan Controller
• Аксессуарлар кутучасы (бурамалар, сыдырма байлагычтар, бекиткичтер ж.б.)
• Колдонуучунун Колдонмосу (бул документ)

1-сүрөт: Included components, showing the PC case, three 120mm ARGB fans, and the 8+8 pin controller for fan and lighting management.

Техникалык шарттар

2-сүрөт: External dimensions and internal component layout overview.

3-сүрөт: Detailed internal clearances for CPU coolers, graphics cards, and cable management.

Орнотуу жана орнотуу

1. Ишти даярдоо

Carefully remove the case from its packaging. Place it on a stable, flat surface. The tempered glass side panel can be removed for easier access during component installation. The case features snap-on panels for tool-free removal.

4-сүрөт: Removing the side panel. Always handle tempered glass with care, using both hands.

2. Motherboard орнотуу

Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, or Mini-ITX). Carefully place your motherboard into the case, aligning it with the standoffs and I/O shield opening. Secure the motherboard with screws.

3. Электр менен камсыздоо блогун (PSU) орнотуу

The BitFenix CETO Basic supports ATX power supplies up to 200mm in length, mounted at the bottom of the case. Slide the PSU into its designated bay and secure it with screws from the rear of the case.

4. Сактагыч түзмөктү орнотуу

The case supports 2+1 3.5" drive bays and 2+1 2.5" drive bays. Install your HDDs and SSDs into the appropriate trays or mounting points and secure them.

5-сүрөт: Storage drive bay locations and PSU mounting area.

5. Графикалык картаны (GPU) орнотуу

The case accommodates GPUs up to 390mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the retention mechanism or screws.

6. Муздатуу системасын орнотуу (вентиляторлор жана радиаторлор)

The case comes with three 120mm Infinity Mirroring ARGB fans pre-installed for enhanced airflow. The top panel supports radiators up to 360mm/280mm/240mm (max thickness 27mm), and the rear supports a 120mm radiator.

6-сүрөт: Radiator and fan mounting options within the case.

7. Кабелдик башкаруу

Utilize the 20mm cable management space behind the motherboard tray to route and secure cables. This improves airflow and aesthetics. Connect all necessary power cables from the PSU to your components and the front panel I/O cables to your motherboard.

The pre-installed ARGB fans connect to the included 8+8 Pin controller. Connect this controller to your power supply via SATA and to your motherboard's ARGB header (if available) for software control, or use the case's LED/Reset button for manual control.

Иштин өзгөчөлүктөрүн иштетүү

Алдыңкы I/O панели

Алдыңкы I/O панели маанилүү портторго жана башкаруу элементтерине ыңгайлуу мүмкүнчүлүк берет:

• 1 x Type-C Port: Заманбап USB-C түзмөктөрү үчүн.
• 2 x USB 3.0 порттору: Жогорку ылдамдыктагы USB түзмөктөр үчүн.
• LED/Reset Button: Controls ARGB lighting modes or functions as a system reset button depending on motherboard connection.
• Кубат баскычы: Системаңызды күйгүзүү/өчүрүү үчүн.

7-сүрөт: Front I/O panel layout and dust filter locations.

ARGB жарыкты башкаруу

The pre-installed Infinity Mirroring ARGB fans offer striking visual effects. Control their lighting via the included 8+8 Pin controller. If your motherboard supports ARGB synchronization (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Biostar RGB Sync), connect the controller to the motherboard's 3-pin ARGB header to manage lighting through software. Otherwise, use the case's LED/Reset button to cycle through pre-set lighting modes.

8-сүрөт: The BitFenix CETO Basic case with its illuminated ARGB fans, highlighting the aesthetic design.

9-сүрөт: Airflow optimization within the case, demonstrating the path of cool air intake and hot air exhaust for efficient cooling.

Техникалык тейлөө

Чаң чыпкасын тазалоо

The BitFenix CETO Basic case is equipped with magnetic dust filters on the top, bottom, and right steel panel. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system.

1. Gently remove the magnetic dust filters from their respective locations.
2. Clean the filters using compressed air, a soft brush, or by rinsing with water (ensure they are completely dry before reattaching).
3. Reattach the magnetic filters to the case.

10-сүрөт: Locations of removable magnetic dust filters for easy maintenance.

Жалпы тазалоо

Корпустун сыртын жумшак менен сүртүңүз, гamp кездеме. Каптоого же чыңалган айнекке зыян келтире турган катуу химиялык заттарды же абразивдүү материалдарды колдонуудан алыс болуңуз.

Проблемаларды чечүү

Система күйбөй жатат

• Электр кубаты розеткага туура туташтырылганын жана PSU которгучу 'ON' абалында экенин текшериңиз.
• Verify that the 24-pin ATX power cable and the CPU power cable are securely connected to the motherboard.
• Check that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.

Fans Not Spinning or ARGB Not Lighting Up

• Ensure the 8+8 Pin ARGB/Fan controller is receiving power via its SATA power connector from the PSU.
• Verify that the fans are correctly connected to the controller.
• If using motherboard software control, ensure the controller's ARGB cable is connected to the motherboard's 3-pin ARGB header and the software is installed and configured correctly.
• If using the case's LED/Reset button for control, ensure the button's cable is connected to the controller.

Poor Airflow or High Temperatures

• Clean the magnetic dust filters regularly as described in the Maintenance section.
• Ensure all fans are spinning in the correct direction for optimal airflow (intake from front/bottom, exhaust from top/rear). The BitFenix CETO Basic includes both positive and reverse fans for optimized airflow.
• Check for proper cable management to avoid obstructing airflow paths.
• Verify that CPU cooler and GPU fans are functioning correctly.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official BitFenix webсайтына кириңиз же жергиликтүү сатуучуңузга кайрылыңыз. Кепилдик талаптары үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.

Өндүрүүчү: BITFENIX

Модел: BFC-CET-200-WWGSW-3A

Webсайт: www.bitfenix.com