CADDXFPV Walksnail Avatar Pro Kit Instruction Manual

1. Киришүү

The CADDXFPV Walksnail Avatar Pro Kit is an advanced digital FPV (First Person View) transmission system designed for FPV drones. It features a high-resolution camera with excellent night vision capabilities, integrated Gyroflow support for stable footage, and a robust digital transmission system for reliable long-range flights. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Avatar Pro Kit.

2. Кутуда эмне бар

Carefully unpack your CADDXFPV Walksnail Avatar Pro Kit and verify that all components are present:

• Avatar Pro Air Unit
• Booster Antenna (2x)
• Коаксиалдык кабель
• Type-C USB кабели
• Screws (various sizes for mounting)
• Прокладка
• Колдонуучунун Колдонмосу (бул документ)

Figure 2.1: All accessories included in the Walksnail Avatar Pro Kit packaging.

3. Продукциянын өзгөчөлүктөрү

The CADDXFPV Walksnail Avatar Pro Kit offers a range of features designed to enhance your FPV experience:

• Crisp 1080P/60FPS with Night Vision: Powered by a large 1/1.8-inch Starvis II sensor and advanced H.265 encoding, capture every detail in stunning clarity, day or night. Perfect for city skyline flights or forest trails after sunset.
• Stable 4KM Digital HD Transmission: Dual high-gain antennas and enhanced TVS protection deliver rock-solid signal penetration with up to 4KM range and just 22ms latency—fly fast and far without video dropouts, even in dense trees or urban areas.
• Built-in Gyroflow with 32GB Storage: Integrated gyro supports Gyroflow stabilization for buttery-smooth footage. Record hours of HD video directly to the built-in 32GB card—no need for external storage or Wi-Fi.
• Compact, Lightweight, and Versatile: Weighs just 33g to reduce drone load. Smart layout fits both 20×20mm and 25.5×25.5mm mounting patterns, with dual power connection options for easy installation on most FPV drone and RC Cars frames.
• Seamless Compatibility with Goggles X & L: Fully works with Walksnail Avatar HD Goggles X and L for an immersive, lag-free FPV experience—see every turn, dive, and gap with total confidence.

Figure 3.1: Exceptional Night Vision with Sony Starvis II Sensor.

Figure 3.2: 160° FOV Ultra Wide and 1080P/60FPS Ultra Clear Video.

Figure 3.3: Smooth & Stable Recording with Built-in Gyroflow and 32GB Storage.

Figure 3.4: Stable Digital Transmission Up To 4KM Range.

4. Орнотуу нускамалары

This section guides you through the installation of the CADDXFPV Walksnail Avatar Pro Kit onto your FPV drone. Ensure your drone is powered off and disconnected from any power sources before beginning installation.

4.1 Mounting the Air Unit

The Avatar Pro Air Unit supports both 20x20mm and 25.5x25.5mm mounting patterns. Choose the appropriate screws and gaskets for your drone frame.

• Identify the mounting location on your drone frame.
• Secure the Avatar Pro Air Unit using the provided screws and gaskets. Ensure a snug fit without overtightening.

Figure 4.1: Dual Mounting Options for the Avatar Pro Air Unit.

4.2 Кубат туташтыруу

The Avatar Pro Kit offers two power connection modes. Refer to the diagram below for proper wiring. When using a 6S battery, it is recommended to use a capacitor with a specification above 50V / 47uF at the power input end.

Figure 4.2: Wiring Diagram for the Avatar Pro Kit.

Figure 4.3: Two Power Connection Modes.

4.3 Антеннаны орнотуу

Connect the dual high-gain antennas to the Avatar Pro Air Unit. Ensure they are securely fastened and positioned for optimal signal reception.

4.4 Камераны орнотуу

Connect the camera to the Air Unit via the coaxial cable. Ensure the camera is mounted in a forward-facing direction on your drone.

5. Иштөө нускамалары

Once the Avatar Pro Kit is installed, follow these steps to begin operation:

• Күйгүзүү: Connect your drone's battery. The Avatar Pro Air Unit will power on automatically.
• Goggle Pairing: Power on your Walksnail Avatar HD Goggles (X or L). Follow the goggle's instructions to pair with the Avatar Pro Air Unit. Typically, this involves pressing a bind button on both devices.
• Видео түрмөгү: Once paired, you should see the live FPV video feed from the Avatar Pro camera in your goggles.
• Жаздыруу: The Avatar Pro Kit supports onboard recording to its 32GB internal storage. Refer to the specific instructions for your flight controller or goggle system to initiate and manage recordings.
• Түнкү көрүнүш: The 1/1.8-inch Starvis II sensor automatically enhances low-light performance, providing clear visuals even in challenging lighting conditions.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your Avatar Pro Kit:

• Тазалоо: Regularly clean the camera lens with a soft, lint-free cloth. Avoid abrasive materials that could scratch the lens.
• Программалык камсыздоонун жаңыртуулары: Check the CADDXFPV official website periodically for firmware updates. Keeping your firmware up-to-date ensures access to the latest features and performance improvements.
• Кабелдик текшерүү: Inspect all cables (coaxial, power, antenna) for any signs of wear, cuts, or damage before each flight. Replace damaged cables immediately.
• Сактагыч: Store the Avatar Pro Kit in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.

7. Кыйынчылыктарды

If you encounter issues with your Avatar Pro Kit, refer to the following common problems and solutions:

8. Техникалык шарттар

9. Кепилдик жана колдоо

CADDXFPV is committed to customer satisfaction. If you are not satisfied with the product or encounter any issues, please contact us before considering a return or taking any other action. We promise to provide you with a 100% satisfactory solution.

9.1 Байланыш маалыматы

You can contact CADDXFPV via:

• Amazon билдирүүсү
• Site Support Mail
• CADDXFPV Official Channels

For additional support and resources, visit the official CADDXFPV store: CADDXFPV Store