ANDERIC RF399A / RF368B Remote Control Instruction Manual

Introduction

This manual provides comprehensive instructions for the ANDERIC RF399A / RF368B remote control. This remote is designed to replace and operate various adjustable bed bases, offering convenient control over your bed's positions. Please read this manual thoroughly before use to ensure proper setup and operation.

Шайкештик

The ANDERIC RF399A / RF368B remote control is compatible with the following adjustable bed bases:

• Tempurpedic Sealy Ease Ergo 2.0
• Sealy Ease 3.0
• Sealy Ease 4.0
• JLDK.30.03.13
• JLDK.30.03.20
• JLDK.30.03.24
• Serta Motion Essentials 3rd Gen
• Beautyrest SmartMotion Base 1.0

Image: The Anderic RF399A remote control displayed with a list of compatible Sealy Ease models, including Ergo 2.0, Ease 3.0, Ease 4.0, and other specific model numbers, as well as Serta Motion Essentials 3rd Gen and Beautyrest SmartMotion Base 1.0.

Өзгөчөлүктөрү

• Арткы жарык баскычтары: For easy operation in low-light conditions.
• Easy Pairing Process: Simple steps to connect with your adjustable bed base.
• Full Bed Control: Adjust head up/down, foot up/down, bed flat, and Zero-G positions.
• Built-in Child Lock: Enhances safety by preventing unintended adjustments.

Image: The Anderic RF399A remote control held in hand, with an adjustable bed in the background. Overlays highlight "Complete Control Head and Foot Adjustments" and list features such as Built-in child lock, Backlit keys, Easy pairing process, and Full bed control (Head Up/Down, Foot Up/Down, Bed Flat, Zero-G).

Орнотуу жана жупташтыруу боюнча көрсөтмөлөр

Follow these steps to pair your ANDERIC RF399A / RF368B remote control with your adjustable bed base:

1. Locate the Battery Backup Box: Find the battery backup box, usually located under the bed base.
2. Калыбына келтирүү баскычын басыңыз: Press the reset button on the battery backup box ЭКИ ЖОЛУ. An LED light on the box should illuminate.
3. Access the Remote's Pair Button: Remove the battery cover from the back of the remote control to expose the PAIR button.
4. Press and Hold Pair: Within approximately 5 seconds of pressing the reset button on the bed base, press and hold the PAIR button on the remote control for 3 seconds. The control box light will turn off upon successful pairing.
5. Сыноо функциясы: Test all functions of the remote control to ensure proper pairing.

Note: If your bed base does not have a visible "learn" button, unplug the bed from the power outlet, wait a few seconds, then plug it back in. Immediately press and hold the pairing button on the remote. This method often initiates the pairing process.

Image: A visual guide demonstrating the "Simple 3-Step Modification" for easy programming of the remote control, including locating the battery backup box, removing the remote cover, and pressing the pair button.

Иштөө нускамалары

The remote control features intuitive buttons for adjusting your bed:

• Башты өйдө/ылдый баскычтары: Control the raising or lowering of the head area of the bed frame.
• Бутту өйдө/ылдый баскычтары: Control the raising or lowering of the foot area of the bed frame.
• Bed Flat Button: Returns the bed to a fully flat, supine position with a single press.
• Zero-G Button: Activates the Zero Gravity mode, which elevates the head to approximately 30 degrees and the feet slightly above the heart, simulating a weightless sensation to relieve pressure.

Сүрөт: жакын план view of the Anderic RF399A remote control, clearly showing the buttons for head and foot adjustments, the 'Bed Flat' button, and the 'Zero-G' button, along with the 'EASE' branding.

Техникалык тейлөө

• Батареяны алмаштыруу: The remote requires 3 AAA (Triple A) batteries (not included). Replace batteries when the remote's performance diminishes. Ensure correct polarity when inserting new batteries.
• Тазалоо: Wipe the remote control with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• Сактагыч: Пультту кургак жерде, өтө жогорку температурадан жана түз күн нурунан алыс сактаңыз.

Image: The Anderic RF399A remote control shown with its dimensions (5 inches length, 2 inches width, 1 inch thickness) and indicating it works with 3 AAA batteries (not included).

Проблемаларды чечүү

• Алыстан жооп бербейт:
  • Батареялар туура салынганын жана заряды жетиштүү экендигин текшериңиз. Керек болсо алмаштырыңыз.
  • Ensure the remote is within range of the bed base.
  • "Орнотуу жана жупташтыруу боюнча нускамалар" бөлүмүндө сүрөттөлгөндөй жупташтыруу процессин кайра аракет кылып көрүңүз.
• Bed Not Moving After Pairing:
  • Verify that the bed base is properly plugged into a working power outlet.
  • Some bed bases have a child lock feature. Refer to your bed base's original manual to ensure it is not locked.
  • If the bed was previously locked or unresponsive, try the unplug/replug method for pairing (unplug bed, wait, plug back in, then immediately press remote's pair button).
• Үзгүлтүктүү функция:
  • Пульт менен керебеттин түбүндөгү кабыл алгычтын ортосунда эч кандай тоскоолдуктар жок экенин текшериңиз.
  • Башка электрондук түзүлүштөрдөн келип чыгышы мүмкүн болгон тоскоолдуктарды текшериңиз.

Техникалык шарттар

Кепилдик жана колдоо

Anderic is committed to providing quality products and comprehensive support for this item. For any questions, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Anderic webсайт.